Ozito OGT-0185 Manual de Usario

Ozito Desbrozadora OGT-0185

Lee a continuación 📖 el manual en español para Ozito OGT-0185 (8 páginas) en la categoría Desbrozadora. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

ChargingCharged ChargingCharged

CORDLESS

GRASS

TRIMMER KIT

18V Lithium Ion

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage: 18V

Max. Width of Cut: 240mm

Battery: 1.5Ah Li-ion

Charge Time: 4-5 Hours

No Load Speed: 8,500/min

Weight: 1.9kg

OGT-

0185

STANDARD EQUIPMENT

ozito.com.au

Safety Guard

Battery Charger

1.5Ah Battery Pack

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

0119

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the

original date of purchase and is intended for DIY (Do It Yourself)

use only. If a product is defective it will be replaced in accordance

with the terms of this warranty. Lithium Ion batteries are covered

by a 12 month warranty. Warranty excludes consumable parts, for

example: blades.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use

Grass Trimmer

Replacement Blade

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

Cha rgingCha rge d Cha rgingCha rge d

1. Tree/ower guard

2. Motor housing

3. Telescopic shaft

4. Shaft adjustment collar

5. Adjustable handle

6. On/off trigger

7. Lock-off switch

8. Sure grip handle

9. Blade

10. Spindle plate

11. Safety guard

12. Battery seating

13. Battery release button

14. Battery charge indicators

15. Charger indicator button

16. Charging cradle

17. Charger LED indicators

18. Charger adaptor

19. Replacement blade

CORDLESS GRASS TRIMMER

ACCESSORIES

KNOW YOUR PRODUCT

1. ASSEMBLY

SETUP & PREPARATION

WARNING! NEVER USE THE GRASS TRIMMER

UNLESS THE SAFETY GUARD IS PROPERLY

FITTED.

CAUTION! ENSURE THE TOOL IS OFF & THE BATTERY

REMOVED BEFORE PERFORMING ANY OF THE

FOLLOWING OPERATIONS.

4321 5

10 11

13 14 16 17 18

WARNING!: STONES, PIECES OF METAL AND

OTHER OBJECTS CAN BE THROWN OUT AT HIGH

SPEED BY THE BLADES.

Fitting the Safety Guard

Turn the grass trimmer

upside down. Align the

recess in the safety guard

with the tabs of the cutter

head. Slide in until it clicks

into place.

1. Place the big hole in the

blade onto the blade mount

on the bottom of the

spindle plate.

3. To remove the blade push

the blade towards the

centre of the spindle and

then slide off.

2. Pull the blade

outwards so that the

small hole is tted

into the mount.

Attaching and Replacing Blade

2. BATTERY CHARGING

Allow at least 3 hours of charge time before initial use of the

battery. Charge the battery pack only with the charger provided.

The battery should be charged in a cool dry place. It will take

2 to 3 charging/discharging cycles before the battery achieves

maximum run time capacity.

Charging the Li-Ion Battery

1. Connect the charging adaptor into the mains power outlet.

3. With the battery sitting on a

at surface, align the raised

ribs on the battery with the

recess in the charger cradle

and slide onto the battery

ensuring a rm connection.

Note: The battery will not develop a memory, it does not have to

be fully discharged before recharging.

2. The charger LED will ash

green showing power

is being supplied to the

charger.

ChargingCharged ChargingCharged

4. The charger LED will illuminate red signifying that the battery

is charging. Battery is fully charged after 4-5 hours, green

LED will turn on.

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,

WE RECOMMEND THE USE OF A RESIDUAL CURRENT

DEVICE (RATED 30mA OR LESS).

ChargingCharged

5. When removing the charger

from the battery, rst press

the battery release tab, then

slide the cradle from its

position.

ChargingCharged

Charger LED Indicator

LED Indicator Situation

GREEN (Flashing) Stand By (no battery pack is inserted)

RED (Illuminated) Battery is charging (low charge)

GREEN (Illuminated) Battery is fully charged.

GREEN & RED (Flashing) Battery is faulty.

GREEN & RED (Illuminated)

Battery is too hot. Remove battery from

charger a let cool. Insert battery again

when at room temperature.

Battery Charge Indicator

1 GREEN LED indicates that the

battery has only a low charge and

requires charging.

2 GREEN LEDs indicate that the

battery has mid state of charge.

3 GREEN LEDs indicate that the

battery is fully charged.

The included battery is

equipped with a battery charge

indicator to show the state of

the battery charge.

Press the charge indicator

button and check to see which

LED light is on.

Note: The battery needs to be removed from the tool to check

the state of charge.

Battery Protection System

The tool is equipped with the battery protection system, which

helps to ensure a long service life.

The output power automatically cuts off during operation when

the tool and battery are placed under the following situations:

• When tool is overloaded:

If this occurs, turn off the tool and let it cool down for 10 mins,

remove the cause of overload, then resume operation.

• When the remaining battery capacity becomes low:

Recharge the battery pack.

Note: The battery protection system does not in any way

damage the tool.

Note: The indicated capacity may be lower than the actual level

during use or immediately after using the tool.

Especificaciones del producto

Marca:	Ozito
Categoría:	Desbrozadora
Modelo:	OGT-0185
Color del producto:	Roestvrijstaal
Peso.:	7000 g
Ancho:	600 mm
Profundidad:	490 mm
Impuesto neto:	128 W
Longitud del cable:	1.2 m
Clase-de-eficiencia-energética:	D
Diámetro de la conexión de escape:	120 mm
Capacidad máxima de extracción:	315 m³/uur
Método de extracción:	Luchtafvoer
Distancia mínima a la placa eléctrica:	650 mm
Distancia mínima a la encimera de gas:	650 mm
Tipo de lámpara:	LED
Tipo filtro veterinario:	Aluminium
Nivel de ruido (alta velocidad:	62 dB
Número de filtros:	2 stuk(s)
Número de velocidades:	3