Ozito ZLGGS-012 Manual de Usario

Ozito pistolas de pegamento ZLGGS-012

Lee a continuación 📖 el manual en español para Ozito ZLGGS-012 (6 páginas) en la categoría pistolas de pegamento. Esta guía fue útil para 14 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

CORDLESS

GLUE GUN

12V Lithium Ion

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 12V

Glue Stick Size Ø7.2 x 190mm

Heating Time: 10 sec

Max Heating Temp: 170°C

Weight: 0.24kg

ZLGGS-012

WHAT’S IN THE BOX

Cordless Glue Gun

ozito.com.au

3 x Glue Stick

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the

original date of purchase and is intended for DIY (Do It Yourself)

use only. If a product is defective it will be replaced in accordance

with the terms of this warranty. Lithium Ion batteries and chargers

are covered by a 12 month warranty. Warranty excludes

consumable parts, for example: accessories etc.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that speciﬁed on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The beneﬁts provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

1017

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

1. FITTING THE BATTERY

KNOW YOUR PRODUCT SETUP & PREPARATION

CORDLESS GLUE GUN

8 Glue Stick x 3 ( Ø7.2mm x 190mm )

ACCESSORIES

This tool is compatible with all batteries and chargers from the

Ozito Home-12volt range.

BATTERY & CHARGER

1 Protective Nozzle Cover

2 Trigger Flow Control

3 On / Off Button

4 Glue Display

5 Battery Seating

6 Glue Stick Entry

7 LED Indicator Lights

1 2 3 4 5 6 7

Installing the Battery Pack

1. Slide the battery into the Glue Gun base until it clicks into place.

Removing the Battery Pack

1. Hold down the battery release button and

then slide the battery out.

2. LOADING THE GLUE STICK 3. SWITCHING THE GLUE GUN ON

OPERATION

Switching the Glue Gun On

Switching the Glue Gun Off

Installing the Glue Stick

2 Squeeze the trigger ow

control multiple times to allow

the glue stick to be pushed

down.

1 Insert the glue

stick into the glue

stick entry and

slide down gently.

2 The rst indicator

light will glow red

to indicate the

glue gun is on.

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND

ALLOWED TO COOL DOWN BEFORE PERFORMING ANY

OF THE FOLLOWING TASKS.

WARNING! THE GLUE GUN NOZZLE AND HEATED GLUE

GUN BECOME HOT WHILE IN USE. IN THE EVENT OF

ACCIDENTAL SKIN CONTACT WITH HOT GLUE, RUN

UNDER COLD WATER IMMEDIATELY.

CAUTION! THE PROTECTIVE NOZZLE WILL REMAIN HOT

FOR A FEW MINUTES. DO NOT STORE THE GLUE GUN

DIRECTLY AFTER USE. ALLOW THE NOZZLE TO COOL

AND THE GLUE TO SOLIDIFY.

1 Hold the on/off switch down

for roughly 3 seconds to start

the glue gun.

Note: A LED light will illuminate

when switched on.

1 Press the on/off switch to

switch off. All LED lights will

turn off.

Note: Allow the glue gun to heat up before you start operating.

3 The second

indicator light will

then glow green

after 10 seconds

indicating the glue

gun is ready to

use.

Especificaciones del producto

Marca:	Ozito
Categoría:	pistolas de pegamento
Modelo:	ZLGGS-012
Color del producto:	Zwart
Ancho:	160 mm
Profundidad:	140 mm
Altura:	86 mm
Nivel de ruido:	- dB
Destinado a:	PC
numero de fans:	1 ventilator(en)
Protección de voltaje de energía:	Over power, Over voltage, Short circuit, Under voltage
Certificación 80 PLUS:	80 PLUS
Seguridad:	UL, CUL, CE, CB, FCC B, TÜV, CCC, C-tick
Tiempo medio entre fallos (MTBF):	100000 uur
Los activos totales:	600 W
Factor de potencia:	0.99
Eficiencia:	80 procent
voltaje-de-entrada-de-CA:	90 - 264 V
Diámetro del ventilador:	120 mm
Conector de alimentación EPS (8 pines):	Ja
Conectores de alimentación de periféricos (Molex) (4 pines):	4
Factor de forma de fuente de alimentación (PSU):	ATX
Tipo de corrección del factor de potencia (PFC):	Actief
Potencia combinada (+3,3V):	150 W
Potencia combinada (+12V):	480 W
Potencia combinada (+5V):	150 W
Salida máxima de audio (+3,3 V):	25 A
Salida de corriente máxima (+12 V):	40 A
Salida máxima de audio (+5V):	25 A
Salida de corriente máxima (-12V):	0.8 A
Salida de corriente máxima (+5Vsb):	3 A
Potencia combinada (-12V):	9.6 W
Potencia combinada(+5Vsb):	15 W
Número de conectores de alimentación SATA:	6
Conector de alimentación de la unidad de disquete:	1
Versión ATX:	2.3