PCE Instruments PCE-T237 Manual de Usario

PCE Instruments Equipo de medición PCE-T237

Lee a continuación 📖 el manual en español para PCE Instruments PCE-T237 (6 páginas) en la categoría Equipo de medición. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

info@pce-americas.com

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

info@industrial-needs.com

Manual

Tachometer

PCE-T237

3.2 Display Descriptions

PCE-T237

3-1 Reflective Mark

3-2 Signal Light Beam

3-3 PHOTO TACH. Sensor

3-4 Display

3-5 Backlit Key

3-6 CONTACT TACH. Key

3-7 Plus/Function Key

3-8 Minus/Memory Key

3-9 RPM adapter (CONE)

3-10 RPM adapter (FUNNEL)

3-11 Surface speed test wheel

3-12 Key Battery Cover On The Back

3-13 PHOTO TACH. Key

3-14 Power/Measurement

3-15 CONTACT TACH. Sensor

MULTIFUNCTIONAL

TACHOMETER

1. FEATURES

* In accordance with verification regulation

JJG105-2000 for tachometer.

* With the most complete functions for rotating

speed measurement

* Multifunctional, one instrument combines

PHOTO TACH. (Rotating speed, Cycle,

Frequency) & CONTACT TACH. (Rotation

speed, Cycle, Frequency, Surface speed,

Moving distance, Custom circumference

moving distance).

* Can also measure the number of pulse signals.

* Wide measuring range & high resolution.

* The last Value / max. Value / min. Value will be

automatically stored in memory and can be

obtained by pressing Memory Key.

* LCD display gives exact rpm with no guessing

or errors and saves battery energy.

* This tachometer used the exclusive one chip of

MICROCOMPUTER LSI-circuit and crystal

time base to accurately offer the high accuracy

measurement.

2. SPECIFICATIONS

Display : LCD ( Liquid Crystal Display)

Measurement range :

PHOTO TACH.: 2.5~99,999 RPM

CONTACT TACH. : 0.5~19,999 RPM

SURFACE SPEED: 0.05~1,999.9 m/min

0.2~6,560 ft/min

Frequency: 0.04~1666.65Hz

Resolution:

TACHOMETER: 0.1 RPM (0.5 ~ 999.9 RPM)

1RPM (over 1,000 RPM)

SURFACE SPEED:

0.01m/min. (over 10 m/min.)

0.1 m/min. (over 100 m/min.)

0.1 ft/min. (0.1 ~ 999.9 ft/min.)

1 ft/min. (over 1,000 ft/min.)

Accuracy : TACH.: (0.05%+1 RPM)

SURFACE SPEED: (0.05%+0.03m/min.)

Sampling Time:

PHOTO TACH. (1 sec. over 60 RPM).

CONTACT TACH. (1 sec. over 15 RPM)

Photo Tach. Detecting distance :

50 to 250mm / 2 to 10 inch.

(typical max. 600mm/24 inch ).

Battery: 4x1.5AAA(UM-4)battery

Operation temp. : 0-50°C (32-122°F)

Size: Main Unit: 185x72x28 mm

Weight : 130g (not including batteries)

Accessories :

Carrying case ...............................1pc.

Reflective tape marks (350mm).......2pc.

RPM adapter (CONE).....................1pc.

RPM adapter (FUNNEL).................1pc.

Surface speed test wheel.................1pc.

Operation manual...........................1pc.

4. MEASUREMENT MODE SELECTION

The Tachometer can be either PHOTO TACH.

and CONTACT TACH. The PHOTO TACH. can

measure Rotating speed, Cycle, Frequency.

The CONTACT TACH. can measure not only

Rotating speed, Cycle, Frequency, Surface

speed, Moving distance, Custom

circumference moving distance. Select the

intended measurement mode according to the

requirement.

4.1 PHOTO TACH. MEASUREMENT

4.1.1 Apply a reflective mark to the object being

measured. If the test RPM less than 50

RPM, suggest to attach more Reflective

Marks averagely. Then divided the reading

shown by the number of Reflective Marks

This TACHOMETER is small in size, light in

weight, easy to carry. Although complex and

advanced, it is convenient to use and

operate. Its ruggedness will allow many

years of use if proper operating techniques

are followed. Please read the following

instructions carefully and always keep this

manual within easy reach.

3-233-17

3-16

3-19

3-20

3-18

3-21

3-25

3-24

3-26

3-273-22

RPM

m/mi n ft /m in

m m s max min

C Lin

3. PANEL DESCRIPTIONS

3.1 Front Panel Descriptions

3-4

3-6 3-13

3-7 3-14

3-15

3-12

3-8

3-5

3-3

3-2

3-1

3-9

3-10

3-11

3-16 Maximum Value Indicator

3-17 Cycle Unit

3-18 Moving Distance Unit

3-19 Moving Distance Indicator

3-20 Custom Circumference Indicator

(Pulse Signal Number Indicator)

3-21 Battery Indicator

3-22 Surface Speed Unit

3-23 Monitor Indicator

3-24 Minimum Indicator

3-25 Rotation Speed Unit

3-26 Measurement Value

3-27 Frequency Unit

is the real RPM to get high resolution &

stability on display reading.

4.1.2 REFLECTIVE MARK

Cut and peel adhesive tape provided into

approx. 12mm (0.5 )square sand apply one

square to each rotation shaft.

a. The non-reflective area must always be

greater than the reflective area.

b. If the shaft is normally reflective, it must be

covered with black tape or black paint before

attaching reflective tape.

4.1.3 Press the Power/Measurement Key (3-14)

to turn on the meter.

4.1.4 Press the Plus/Function Key (3-7) to select

the intended parameter. Each time

pressing the Plus/Function Key (3-7), the

measuring parameter is converted once.

Corresponding unit or indicator of the

parameter will be displayed.

A. When the Rotation Speed Unit (3-25) is

displayed, rotation speed can be

measured.

B. When the Cycle Unit (3-17) is displayed,

cycle can be measured.

C. When the Frequency Unit (3-27) is

displayed, frequency can be measured.

4.1.5 Press the PHOTO TACH. Key (3-13), the

PHOTO TACH. Sensor emits a visible light

beam. Align the visible light beam with the

applied target. Verify that the Monitor

Indicator (3-23) is displayed when the

target passes thru the light beam. When

the reading stabilizes, press the PHOTO

TACH. Key (3-13) again.

4.1.6 During measuring, the last Value, max.

Value, min. Value are automatically

memorized. The data can be find by

pressing Minus/Memory Key(3-8). For

details see 7. MEMORY CALL

OPERATION.

4.2 CONTACT TACH. MEASURE ROTATION

SPEED, CYCLE, FREQUENCY

4.2.1 Install the RPM adapter (CONE) (3-9) or

the RPM adapter (FUNNEL) (3-10) onto

the CONTACT TACH. Sensor (3-15).

4.2.2 Press the Power/Measurement Key

(3-14) to turn on the meter.

4.2.3 Press the Plus/Function Key (3-7) to

select the intended parameter. Each time

pressing the Plus/Function Key (3-7), the

measuring parameter is converted once.

Corresponding unit or indicator of the

parameter will be displayed.

A. When the Rotation Speed Unit (3-25) is

displayed, rotation speed can be

measured.

B. When the Cycle Unit (3-17) is displayed,

cycle can be measured.

Especificaciones del producto

Marca:	PCE Instruments
Categoría:	Equipo de medición
Modelo:	PCE-T237

¿Necesitas ayuda?

Si necesitas ayuda con PCE Instruments PCE-T237 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Equipo de medición PCE Instruments Manuales

PCE Instruments PCE-TUM 50 Manual de Usario

24 Octubre 2024

PCE Instruments PCE-325D Manual de Usario

23 Octubre 2024

PCE Instruments PCE-AM 30 Manual de Usario

23 Octubre 2024

PCE Instruments PCE-900 Manual de Usario

23 Octubre 2024

PCE Instruments PCE-CSM 10 Manual de Usario

23 Octubre 2024

PCE Instruments PCE-CSM 7 Manual de Usario

23 Octubre 2024

PCE Instruments PCE-CSM 3 Manual de Usario

23 Octubre 2024

PCE Instruments PCE-CSM 8 Manual de Usario

23 Octubre 2024

PCE Instruments PCE-CT 26FN Manual de Usario

23 Octubre 2024

PCE Instruments PCE-CSM 1 Manual de Usario

23 Octubre 2024

Equipo de medición Manuales

Últimos Equipo de medición Manuales

PeakTech 1207 Manual de Usario

26 Octubre 2024

Kern FL 1KG Manual de Usario

25 Octubre 2024

PeakTech 6193 Manual de Usario

25 Octubre 2024

Extech 380941 Manual de Usario

22 Octubre 2024

Extech 380926 Manual de Usario

22 Octubre 2024

CSL 306637 Manual de Usario

21 Octubre 2024

Amprobe TACH-20 Manual de Usario

20 Octubre 2024

Stamos S-LS-28 Manual de Usario

15 Octubre 2024

Stamos S-LS-86 Manual de Usario

15 Octubre 2024

Stamos S-LS-61 Manual de Usario

15 Octubre 2024