PCE Instruments PCE-USM Manual de Usario

Lee a continuación 📖 el manual en español para PCE Instruments PCE-USM (6 páginas) en la categoría Equipo de medición. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
PCE-USM RS-232 - USB Logger
The logger enables the user to save the transmission data of the RS-232 interface to one or more
folders in txt format, along with the me and date. The logger can receive and retrieve data. This
means that with the right conguraon (consider pin assignment of the RS-232), the PCE-USM
adaptor can be connected with any RS- 2 interface to record the data. 23
With the scales PCE-LSM / PCE-LS / PCE-AB / PCE-ABZ / PCE-PM / PCE-TP / PCE-BDM / PCE-BT / PCE-
TB and PCE-SD Series, the PCE-USM can be plugged directly onto the RS-232 interface.
In case it is not possible to plug the adaptor directly onto the RS-232 interface, you have the
possibility to use an extension cable The standard edion comes with an external power supply. .
(12V / 100 mA mains adaptor in + / out -)
1. Connect the PCE-USM adaptor with the RS-232 interface. Then provide power supply and watch
the diodes at the PCE-USM storage adaptor. Both diodes will light up briey and the diode at the side
of the RS-232 interface should be lit now. If it does not, this normally means that the PCE-USM is not
connected to the power supply. Check the power supply If the diode at the side of the RS-232 .
interface ashes, a data transfer to the PCE-USM storage adaptor takes place.
2. Now insert the USB pen drive into the PCE-USM USB storage adaptor and watch the diodes. The
diode at the side of the RS-232 interface will ash briey and then light up permanently. During the
me the diode was ashing, a conguraon le was saved to the pen drive (see below).If the diode
at the side of the USB interface did not light up, this can mean that the USB pen drive was not
recognised or that it is full. Check the USB pen drive’s formang and, if necessary, try using another
pen drive. FAT12 / FAT16 and FAT32 formatng is possible Now try to transmit a few data to the .
PCE-USM adaptor via the RS-232 interface and watch the diodes of the PCE-USM adaptor. If the data
transmission was successful, the diode at the side of the RS-232 interface should ash rst, followed
by the diode at the side of the RS-232 interface. This ashing indicates: date received and transferred
to USB.
In case the data transmission was successfully completed, there will be two les on the USB pen
drive.
„CONFIG.TXT“ This is the conguraon le in which you can set individual parameters.
„LOG.TXT“ This is the le which contains your saved values.
The conguraon le “CONFIG.TXT“ looks as follows:
The values can easily be changed and thus adapted to your individual needs and dierent devices.
The values behind the can be changed On the right behind , you can see the possibilies of „=“ . „//
what you can enter (allowed values).

Especificaciones del producto

Marca: PCE Instruments
Categoría: Equipo de medición
Modelo: PCE-USM

¿Necesitas ayuda?

Si necesitas ayuda con PCE Instruments PCE-USM haz una pregunta a continuación y otros usuarios te responderán




Equipo de medición PCE Instruments Manuales

Equipo de medición Manuales

Últimos Equipo de medición Manuales