Phoenix Gold Ti312d2 Manual de Usario

Phoenix Gold Altavoz de subgraves Ti312d2

Lee a continuación 📖 el manual en español para Phoenix Gold Ti312d2 (4 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Subwoofer Manual

Features

Models: Ti310d2, Ti310d4, Ti312d2, Ti312d4

• 40mm of Peak to Peak Excursion

• 2.5” Ultra High Temp Copper Wound Voice Coil

• Radial Backplate Venting System

• Easy Connect Single Location Speaker Terminal

• Long Throw Dual Spider Suspension

• High Excursion CAE/CAD Motor Design

• Woven Tinsel Leads

• Black Anodized Aluminum Former

• One Piece Injection Polypropylene Dustcap

• High Roll Butyl Rubber Double Stitched Surround

• Optimized for Sealed or Vented Enclosures

• Rigid Powder Coated Anti-Resonant Castbasket

• Quick Disconnect Series/Parallel Wires Included

www.phoenixgold.com

Subwoofer Owner’s Manual

Building an EncLOSURE

SEALED Enclosure Recommendations

Phoenix Gold subwoofers are overbuilt in virtually every way conceivable. It is important that the subwoofer’s enclosure

is built to these same exacting standards. The enclosure must be constructed of at least .75 inch MDF for 10 and 12 inch

subwoofers or .625 MDF for 8 inch subwoofers. Screws or air staples are excellent construction fasteners when used with

a strong bonding “yellow” wood working glue that can ll joint gaps. Be sure that the enclosure’s panels are airtight at all

joining seams. Lining the walls with a polyester matting 1 to 3 inches thick is sufcient.

Your PG dealer has extensive knowledge, tools and the experience needed for the design and construction necessary for

your subwoofer application. We also recommend you consult with your dealer for specic technical assistance related to

your installation.

The charts provided should be used as a reference when building an enclosure for your subwoofer. The charts contain

several enclosure types. The Sound Quality enclosure provides deeper, tighter, and more musical output to truly reproduce

the original source material. The SPL enclosure ts the “basshead’s” need for maximum output while sacricing some sound

quality. The normal enclosure is a balance between SPL and SQ.

SEALED

VOLUME(cu.ft.)

Ti310d2

Ti310d4

Ti312d2

Ti312d4

SPL 0.4 0.75

Normal 0.6 1.1

SQ 0.8 1.5

SPL = More overall output and compact enclosure size, but sacrices some low bass and smooth overall output

Normal = Excellent blend of low bass, accurate and strong overall outputRecommended for most listeners.

SQ = Smooth and exceptional low bass output, but larger enclosure size and sacrices some overall output

Additional Notes:

• For vented enclosures a subsonic lter set at 30Hz to 40Hz is highly recommended.

• Sealed enclosure volumes INCLUDE THE DISPLACEMENT of the subwoofer.

• Vented enclosure volumes INCLUDE THE DISPLACEMENT of the subwoofer. But DO NOT include

displacement of the vent.

• In many cases, a 4 inch round vent/port can be used instead of a rectangle/slot vent. This can reduce the vent

length and simplify the enclosure construction. However, in some rare cases at high power a small amount of

port noise maybe audible. The provided slot/rectangle ports will provide maximum performance and the most

predictable results. Contact technical support for additional enclosure options.

www.phoenixgold.com

VENTED - SQ Ti310d2

Ti310d4

Ti312d2

Ti312d4

Volume(cu.ft.) 2.0 2.0

Vent Opening(in.) 2 x 10 2 x 12

Vent Length(in.) 24 29

Tuning Freq 32Hz 32Hz

VENTED - Normal Ti310d2

Ti310d4

Ti312d2

Ti312d4

Volume(cu.ft.) 1.5 1.75

Vent Opening(in.) 2 x 10 2 x 12

Vent Length (in.) 25.5 28

Tuning Freq 36Hz 35Hz

VENTED - SPL Ti310d2

Ti310d4

Ti312d2

Ti312d4

Volume(cu.ft.) 1.25 1.75

Vent Opening(in.) 2 x 10 2 x 12

Vent Length(in.) 24.5 23.5

Tuning Freq 40Hz 38Hz

Subwoofer Owner’s Manual

Vented Enclosure Recommendations

Power HandLing Recommendations

• 400w to 600w RMS is the optimal power range for any Ti3 subwoofer. In a sealed or vented enclosure, the woofer

will play to its full potential with very high reliability.

• Powering a Ti3 woofer with more than 600w RMS will create excess heat in the motor and voice coil with minimal

additional output.

• Contrary to popular car audio myths, subwoofers do not need as much power as you think. A well engineered

subwoofer such as the Ti3, that has the proper balance of efciency, compliance and excursion will reach

extremely loud levels with much less power than most users would expect. Practice safe sound.

100w 400w 600w1w 800w

MINIMUM POWER RANGE:

Sub will perform correctly

but not to its full potential.

OPTIMAL POWER RANGE:

Sub will perform to its full

potential with maximum reliability.

DANGEROUS POWER RANGE:

Damage will occur during any

extended period of playing time.

Optimal Power Range

Especificaciones del producto

Marca:	Phoenix Gold
Categoría:	Altavoz de subgraves
Modelo:	Ti312d2
Tipo de embalaje:	Blister
Memoria interna:	8 GB
Tipo de memoria interna:	DDR4
Certificados de sostenibilidad:	CE
Cumplimiento de la sostenibilidad:	Ja
ETC:	Nee
Memoria de velocidad de reloj:	3200 MHz
Factor de forma de memoria:	260-pin SO-DIMM
Componente para:	Laptop
Diseño de memoria (módulos x tamaño):	1 x 8 GB
Tipo de memoria buffer:	Unregistered (unbuffered)
voltaje de la memoria:	1.2 V
Código del Sistema Armonizado (SA):	84733020
Latencia CAS:	22
Configuración del módulo:	1024M x 8