Phoenix Gold Z18AB Manual de Usario

Lee a continuación 📖 el manual en español para Phoenix Gold Z18AB (4 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Models: Z212AB-V2
ACTIVE SUBWOOFER ENCLOSURES
Model: Z18AB | Z110ABV2 | Z112ABV2
•Built-in class A/B amplier
•Bass reex tuning
•High and low inputs
•Precision constructed trapezium enclosure
•Remote control and wiring kit included
(With Power and Signal Cables)
•Frequency Response: 10Hz-200Hz
•Signal to Noise Ratio: >60dB
•Crossover Slope: 6dB per Octave
•Crossover Range: 50Hz – 200Hz
•Fuse: 15A
SPECIFICATIONS
8"/200mm | 10"/250mm | 12"/300mm
All specications subject to change without notice.
Z-Series Enclosures
Z18AB 8Active Enclosure | 10” Active Enclosure | Z110AB-V2 Z112AB-V2 12Active Enclosure
SPECIFICATION Z18AB Z110AB-V2 Z112AB-V2
Max Power (Watts) 500 Watts 800 Watts 1000 Watts
RMS Power (Watts) 125 Watts 200 Watts 250 Watts
Amplier Type Class-AB Class-AB Class-AB
Frequency Response 10Hz-200Hz 10Hz-200Hz 10Hz-200Hz
Signal to noise ratio >60dB >60dB >60dB
Crossover Slope 6dB per octave 6dB per octave 6dB per octave
Crossover Range 50Hz - 200Hz 50Hz - 200Hz 50Hz-200Hz
Tuning Bass Reex Bass Reex Bass Reex
Woofer Size 8"/ 200mm 10” / 250mm 12”/ 300mm
Fuse 15A 15A 15A
Dimensions (mm) 400 x 295 x 280 bmm 476 x 343 x 331mm 560mm x 384 x 394mm
Control Descriptions
LEVEL
This allows the adjustment of the amplier level of the subwoofer. Turn clockwise to increase the level. If the sound
becomes distorted reduce the level.
LOW PASS FILTER (LPF)
This allows the adjustment of the highest frequency the active enclosure will produce. This should be adjusted to blend
with your main speakers. Typically, this will be set to around 100Hz (approximately the central position of the control
knob)
BASS REMOTE CONTROLLER
This control can be mounted in the front of the vehicle to give you control of your subwoofers output level.
Installation
Make sure the active enclosure is rmly xed in your vehicle. Check before drilling or cutting holes. DO NOT work near
fuel tanks, fuel lines hydraulic lines or electrical wiring.
DO NOT mount the active enclosure in such a way as to pinch or damage the wires.
Make sure everything is rmly connected before attaching a +12V wire. Ensure the +12V wire is fused as close as
possible to the battery. Always use a fuse with the recommended rating.
Z-Series Enclosures
Disclaimer
Always ensure the Active Enclosure is securely attached, to avoid movement. PHOENIX GOLD accepts
no responsibility for damage or injury in relation to inappropriate securing of this product.
Wiring
• Connect the ground wire to the vehicle rst (clean dirt and paint to bare metal)
• Connect the remote on (blue wire)
• Connect the RCA cables if applicable OR
Connect the speaker level wire by splicing into the headunits speaker wires. See note1
• Connect the remote level controller with the supplied lead
• Please ensure power wire is fused within 12” of battery
• Connect the 12 volt (red wire) to the positive battery terminal.
• Check all connections.
Diagram

Especificaciones del producto

Marca: Phoenix Gold
Categoría: Altavoz de subgraves
Modelo: Z18AB

¿Necesitas ayuda?

Si necesitas ayuda con Phoenix Gold Z18AB haz una pregunta a continuación y otros usuarios te responderán




Altavoz de subgraves Phoenix Gold Manuales

Altavoz de subgraves Manuales

Últimos Altavoz de subgraves Manuales