POWERNAIL 1890U Manual de Usario
Lee a continuación 📖 el manual en español para POWERNAIL 1890U (12 páginas) en la categoría Compresor. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/12
Model 1890U PowerStapler™
POWERNAIL
®
CO.
REV 15.08.07
WARNING
OPERATION AND MAINTENANCE MANUAL
MANUAL DE OPERACION Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
Read this manual before you use this Powernailer®. Follow all safety warnings and
instructions. If you are uncertain about the operation of the nailer, call us directly
at 1-800-323-1653 for assistance or contact the closest Powernail Dealer for help.
Please retain this information for future reference.
2
The 1890U PowerStapler® is a trigger-pull stapler designed to bring Powernail
quality and fl ooring expertise to a pneumatic stapler. The 1890U is designed for
use with 1/4” crown, 18 GA staples from 7/8” to 1-1/2” in length.
INTRODUCTION
INDEX
LIMITED WARRANTY
POWERNAIL® Company, Inc. warrants to its customer, and to the fi rst end-use purchaser
of POWERNAIL 1890U PowerStapler purchased from an authorized POWERNAIL
distributor, that each serialized manufactured 1890U PowerStapler by POWERNAIL®,
for a period of 12 months from the date of purchase; shall be free of defects in materials and
workmanship and will meet POWERNAIL’S specifi cations in eect at the time of product
shipment. POWERNAIL will repair or replace, at its option, any 1890U PowerStapler that
does not conform to this warranty. Claims must be made no later than fi fteen (15) days after
the end of the warranty period. POWERNAIL will perform all repair or replacements itself
or through its authorized contractors. POWERNAIL is not responsible for shipping, labor
or other direct or indirect costs. Damage caused by abuse, misuse, unusual or excessive
wear is excluded. Repair or modifi cation of the Products by unauthorized parties will
void this warranty. The customer is responsible for returning Products to POWERNAIL
for verifi cation of nonconformance. Warranties for Products not manufactured by
POWERNAIL are limited to warranties provided to POWERNAIL by the manufacturer of
such product that are assignable to customer.
THESE WARRANTIES AND REMEDIES ARE EXCLUSIVE OF ALL OTHERS,
EXPRESS OR IMPLIED. THE WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR PURPOSE ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL
POWERNAIL’S LIABILITY FOR A WARRANTY CLAIM EXCEED THE PRICE PAID
TO POWERNAIL FOR THE NONCONFORMING PRODUCT, REGARDLESS OF THE
FORM OR BASIS OF THE CLAIM OR CAUSE OF ACTION.
Index..................................... 2
Warranty............................... 2
Safety Instructions................ 3
Operating the tool............... 4-6
Air Supply............................. 5
Loading fasteners................. 6
Clearing a jam............................ 7
Safety Labels...................... 7
Troubleshooting Chart.......... 9
Parts List........................ 10
Schematic........................ 11
Phone Support..................... 12
Web Site.............................. 12
Powernail Company Info..... 12
SAFETY INSTRUCTIONS
3
When operating this Nailer, the operator and others in the work area should ALWAYS wear approved
SAFETY GLASSES, with front and side eye protection. Eye protection will help guard against fl ying
nails and debris, which could cause severe eye injury.
EAR PROTECTION should be used to prevent hearing damage when there are high noise levels
in the work area. ALWAYS use ear plugs with a noise reduction rated at 29 db or higher at a
construction site.
Noise characteristic values in accordance with ENxx1:
A-weighted single-event sound pressure level at operator’s position: LPA, ls94dBA
A-weighted single sound pressure level:LpA,ls,lm89dBA
Vibration characteristic values in accordance with ISO 8662, PART II
Weighted root mean square acceleration 3.2m/s²
Always DISCONNECT THE AIR SUPPLY before making any adjustments, repairing, clearing jams or when
the Nailer is not in use. Do not use on scaolding or ladders and disconnect nailer from air supply when
transporting
between installation areas.
Never attach the female end of a quick disconnect to the Nailer. This will trap air inside the Nailer and permit it
to be discharged. Only the unrestricted male connection should be attached to the Nailer.
Nailer requires an air source that can continuously deliver 70 to 100 psi at 3-1/2 cubic feet of air per minute
for operation.
Normal air pressure should not exceed 100 psi or damage to the Nailer and seals may occur. Excess air
pressure can cause the Nailer to explode.
To prevent fi re or explosion, use only regulated compressed air—do not use bottled gases of any kind (no
oxygen or combustible gasses) to power this Nailer.
Nailer is intended for use installing wood fl ooring and is not to be used for purposes not specifi ed in the
operations manual.
Do not use any nails other than Powernail® Powercleats which are 20 gage L-cleat nails specifi cally designed
for use in any 20 gage Powernailer. Powercleat nails are available in lengths of 1” and 1-1/4”. Contact your
Powernail Dealer for the correct Powercleats for the Model 2000.
Use only Powernail replacement parts in the repair or maintenance of this nailer. Parts or repair services are
available from the manufacturer or from agents authorized by the manufacturer. Repairs should be carried out
only by trained service personel in the fi eld of fastener driving tools who will observe proper safety controls
while performing maintenance. Service personel should be qualifi ed to assess the safe working condition of
fastener driving tools.
Always make sure Nailer is empty of nails before connecting air hose, so as to prevent any accidental
discharge from occurring. ONLY CONNECT AIR TO AN UNLOADED NAILER.
Do not depress the trigger when loading. If the fasteners are jammed, disconnect the tool from the air supply
before you remove the jammed nails.
Never place any part of the body in the discharge path of the Nailer when air is connected to the
Nailer. Never point the tool at yourself or others, even if the tool is not loaded. For safety, keep out
of reach of children. Never leave the Nailer unattended while it is connected to an air supply.
Do not fi re into hard materials or attempt to use on hard or brittle material such as concrete, steel
or tile. Before using this tool, carefully check that all parts are working correctly. Do not use the tool if it is not
operating correctly, check for causes and adjust as necessary for proper operation. When not in use, the tool
should be cleaned, fully assembled and then stored in a dry location. This will extend the life of the tool and
reduce any oxidation.
Especificaciones del producto
| Marca: | POWERNAIL |
| Categoría: | Compresor |
| Modelo: | 1890U |
¿Necesitas ayuda?
Si necesitas ayuda con POWERNAIL 1890U haz una pregunta a continuación y otros usuarios te responderán
Compresor POWERNAIL Manuales
25 Agosto 2024
Compresor Manuales
- Compresor DeWalt
- Compresor Airpress
- Compresor Ferm
- Compresor Ozito
- Compresor Gude
- Compresor Draper
- Compresor Black And Decker
- Compresor Vonroc
- Compresor Stanley
- Compresor Hyundai
- Compresor Metabo
- Compresor Parkside
- Compresor Meec Tools
- Compresor Auto Joe
- Compresor Hikoki
- Compresor Sun Joe
- Compresor Hazet
- Compresor Einhell
- Compresor Senco
- Compresor Unimac
- Compresor Power Craft
- Compresor Powerplus
- Compresor Porter-Cable
- Compresor Boss
- Compresor Laica
- Compresor Topcraft
- Compresor Scheppach
- Compresor Bavaria
- Compresor Technaxx
- Compresor Nilfisk
- Compresor Duro
- Compresor Omnitronic
- Compresor Zipper
- Compresor Fieldmann
- Compresor Eventide
- Compresor Truper
- Compresor Abac
- Compresor Kibani
- Compresor Cocraft
- Compresor Herkules
- Compresor Toolcraft
- Compresor Aerotec
- Compresor SPL
- Compresor Westfalia
- Compresor Holzmann
- Compresor Anova
- Compresor Pansam
- Compresor Global
- Compresor Freeman
- Compresor Airman
- Compresor Merlin
- Compresor Duro Pro
- Compresor WilTec
- Compresor Cartrend
- Compresor MSW
- Compresor OKAY
- Compresor Hamron
- Compresor Robust
- Compresor Proviel
- Compresor Alphacool
- Compresor ExelAir
- Compresor TJM
- Compresor Prowork
- Compresor CMI
- Compresor TAURUS Titanium
Últimos Compresor Manuales
27 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
15 Octubre 2024
15 Octubre 2024
13 Octubre 2024
9 Octubre 2024
9 Octubre 2024
3 Octubre 2024