Pro-form PFMC99110 Manual de Usario

Pro-form Monitor de frecuencia cardíaca PFMC99110

Lee a continuación 📖 el manual en español para Pro-form PFMC99110 (12 páginas) en la categoría Monitor de frecuencia cardíaca. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

Heart Rate Monitor User’s Guide Model No.

PFMC99110

Congratulations for purchasing the new AccuRate™

heart rate monitor. To install and use the heart rate

monitor, read and follow all instructions in this

user’s guide. For detailed instructions about using

the heart rate monitor with your treadmill, refer to the

user’s manual included with your treadmill.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following conditions: (1)

this device may not cause harmful interference, and

(2) this device must accept any interference re-

ceived, including interference that may cause unde-

sired operation. Changes or modifications not ex-

pressly approved by ICON Health & Fitness, Inc.

could void the user’s authority to operate this device.

WARNING

If you have an implanted medical device such

as a pacemaker, check with your physician be-

fore using the heart rate monitor.

If you have heart problems, or if you are over 60

years of age and have been inactive, do not use

pulse-driven programs.

If you are taking medication regularly, consult

your physician to find whether the medication

will affect your exercise heart rate.

How to Install the Receiver

Before the heart rate monitor can be used, the included receiver must be installed. Pages 2 through 7 of this

user’s guide include eight sections that show how the receiver is to be installed in eight different styles of tread-

mills. Look at pages 2 through 7 and find the drawings that most closely resemble your treadmill. Then,

follow the instructions in that section to install the receiver. Note: Your treadmill may not look exactly like the

treadmills shown in the drawings. If you have questions, call toll-free 1-800-999-3756.

1. Make sure that the power cord is unplugged. Remove

the indicated Screws from the Console Back (A).

Important: The Screws may be different lengths. Keep

track of which Screws were removed from which holes.

2. Peel the paper off the pad on the bottom of the Receiver

(B). Turn the Receiver so the cylinder is on the side

shown, and press the Receiver into the bottom of the

Console Base (C) in the indicated location.

Screws

Cylinder

3. Connect the Short Jumper Wire (D) to the wire on the

Receiver (B). Connect the other end of the Short Jumper

Wire to the PULSE jack on the back of the Console (C). If

there is a wire already plugged into the PULSE jack, un-

plug it. Note: The included Long Jumper Wire can be dis-

carded. The Wire Tie can be used to tie wires if needed.

Make sure that no wires are pinched. See step 1.

Reattach the Console (C) with the 1” Screws, 1 3/4”

Screws, and 2” Screws. Important: If the Screws are

not put back into the same holes that they were

removed from, the Console will be damaged.

PULSE

Jack

1. Make sure that the power cord is unplugged. Remove

the indicated Screws (A) from the Console Back (B).

2. Peel the paper off the pad on the bottom of the Receiver

(C). Turn the Receiver so the cylinder is on the side

shown, and press the Receiver into the bottom of the

Console Back (B) in the indicated location.

Connect the Short Jumper Wire (D) to the wire on the

Receiver (C). Connect the other end of the Short Jumper

Wire to the PULSE jack on the back of the Console (E).

Note: The included Long Jumper Wire can be discarded.

The Wire Tie can be used to tie wires if needed.

Make sure that no wires are pinched. See step 1.

Reattach the Console Base (E) with the Screws (A).

PULSE

Jack

Cylinder

Especificaciones del producto

Marca:	Pro-form
Categoría:	Monitor de frecuencia cardíaca
Modelo:	PFMC99110
Peso.:	150 g
Indicadores LED:	Ja
Frecuencia del adaptador de CA:	47/63 Hz
Voltaje de entrada del adaptador de CA:	90 - 264 V
Actual:	0.8 A
Número de puertos Ethernet LAN (RJ-45):	2
Certificación:	CE/FCC/UL/CB
Voltaje de entrada:	90 - 264 V
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Tecnología de cableado:	CAT5
Temperatura de almacenamiento:	-40 - 80 °C
Frecuencia:	47 - 63 Hz
Tipo de interfaz Ethernet:	Gigabit Ethernet
Alimentación a través de Ethernet (PoE):	Ja
Dimensiones (Ancho x Fondo x Alto):	85 x 76 x 36 mm
Temperatura de funcionamiento (TT):	-30 - 60 °C
Humedad relativa de funcionamiento (VV):	5 - 90 procent
Alimentación-a-través-de-Ethernet-(PoE):	24 V