Pro-Lift W-1806 Manual de Usario
Lee a continuación 📖 el manual en español para Pro-Lift W-1806 (4 páginas) en la categoría Compresor. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/4
5 in 1 Air Compressor
Operating Instructions and Parts Manual
SFA Companies, Inc.
10939 N. Pomona Ave.
Kansas City, MO 64153
Tel (816) 891-6390, Fax (816) 891-6599 Printed in China
W-1806-M0_072015
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey
all safety messages that follow this symbol to avoid possible injury or property damage
!
Model W-1806
2
SAFETY AND GENERAL INFORMATION
Save these instructions for future use. Study, understand
and follow all instructions before operating this device.
The owner and operator of this device shall have an
understanding of the product and safe operating procedures
before attempting to use. If any doubt exists as to the
safe and proper use of this product, remove from service
immediately. Instructions and safety materials shall be
conveyed in the operator’s native language before use of
this product is authorized.
Inspect before each use. Do not use if bent, broken, melted,
burned or otherwise damaged components are noted.
A compressor that is damaged in any way or operates
abnormally shall be removed from service immediately. This
unit is designed for intermittent use only. Operation beyond
it’s designed duty cycle may result in compressor and/or
vehicle damage. NEVER exceed rated pressure of the item
being inated. If rated pressure is exceeded, the item being
inated may burst.
• Study, understand and follow all instructions before operating this device.
• When using this air compressor, basic safety precautions should always be followed to reduce risk of re or electrical
shock.
• Do not exceed rated pressure of the item being inated.
• Do not leave device operating and unattended.
• If DC plug fuse is blown, only replace with fuse of identical rating.
• This device contains a DC motor and components which may arc during normal operation. This arcing may ignite
ammable gases. Do not operate in a ammable environment.
• Keep out of reach of children.
• The power cord on this product contains chemicals known to the State of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling (California law requires this warning to be given to customers
in the State of California).
• Do not alter this product.
• Failure to heed these markings may result in personal injury and/or property damage.
! WARNING
PRODUCT DESCRIPTION
The Pro-Lift 4 in 1 Air Compressor is designed and engineered
to inate automotive and light truck tires to manufacturer’s
recommended pressure. It can also be used to inate and
deate low pressure inatables such as rafts, cushions and
sports balls. Refer to the vehicle’s owners manual or inatable
product owner’s manual before using the compressor.
HOW TO USE
A. FOR USE WITH HIGH PRESSURE INFLATABLE ITEMS
1. With thumb latch Quick Connector open, place securely
onto tire valve stem (Fig. 2).
2. Use thumb to close Quick Connector, ensuring that the
thumb latch is as far down as possible (Fig. 3).
3. Insert power cord plug-in into compressor. Insert power
cord into a suitable outlet or 12V DC source (Fig. 4).
Toggle air ON/OFF switch to ON position. Unit should
begin inating.
4. Toggle air ON/OFF switch to OFF once desire pressure
is acheived, disconnect Quick Connector and unplug the
compressor power cord.
Fused 12V
DC Plug
Deator Inlet
(Not Visible)
Low Pressure
Inator Outlet
Pressure
Gauge
ON/OFF Switch
Low Pressure
inator Adapters
Figure 1 - W-1806 Nomenclature
Quick Connect Adapters and
replacement tire stem parts
Power Cord
Power Cord
Plug-in
3
B. FOR USE WITH LOW PRESSURE INFLATABLES
1. To inate air mattresses, beach balls, life jackets, etc.,
remove low pressure inator and low pressure inator
adapters from storage compartment.
2. Connect low pressure inator adapters onto low pres-
sure inator/deator (labeled “INFLATION POINT”) on
side of compressor, and use to connect plastic air hose.
3. Insert power cord plug-in into the detached low pressure
inator.
4. Plug the compressor into the DC 12V outlet. Toggle air
ON/OFF switch to ON position. Unit should begin inat-
ing.
5. Inate to a pressure or level of rmness recommended
by the manufacturer. Toggle air ON/OFF switch to OFF
and check for desired rmness or pressure as needed.
6. Remove the adapter from low pressure inator.
C. DEFLATING INFLATABLES
1. To deate air mattresses, beach balls, life jackets, etc.,
remove low pressure inator and low pressure inator
adapters from storage compartment.
2. Connect low pressure inator adapter onto low pressure
deator outlet in front of low pressure inator (labeled
“DEFLATION POINT”).
3. Insert the adapter into the appropriate receiver on the
item to be deated.
4. Insert power cord plug-in into the detached low pressure
inator.
5. Connect the 12V DC plug to a suitable power source and
toggle the ON/OFF switch to ON. Compressor should
begin deation.
6. When item is sufciently deated, toggle ON/OFF switch
to OFF.
7. Remove the adapter from low pressure inator.
Quick Connector
Adapters for Inflatables
Plastic air hose
inflator adapters
Sports Adapter
Hose
Figure 2 Figure 3
Figure 4
Figure 5
5. Use a tire gauge to check ination and adjust to desired
pressure as recommended by the vehicle and/or tire
manufacturer.
NOTICE: Always double check air pressure using a reli-
able pressure gauge.
Especificaciones del producto
| Marca: | Pro-Lift |
| Categoría: | Compresor |
| Modelo: | W-1806 |
¿Necesitas ayuda?
Si necesitas ayuda con Pro-Lift W-1806 haz una pregunta a continuación y otros usuarios te responderán
Compresor Pro-Lift Manuales
28 Agosto 2024
28 Agosto 2024
Compresor Manuales
- Compresor DeWalt
- Compresor Airpress
- Compresor Ferm
- Compresor Ozito
- Compresor Gude
- Compresor Draper
- Compresor Hitachi
- Compresor Black And Decker
- Compresor Vonroc
- Compresor Stanley
- Compresor Hyundai
- Compresor Yato
- Compresor Metabo
- Compresor Parkside
- Compresor Meec Tools
- Compresor Auto Joe
- Compresor Hikoki
- Compresor Sun Joe
- Compresor Hazet
- Compresor Einhell
- Compresor Ultimate Speed
- Compresor Senco
- Compresor Unimac
- Compresor Steren
- Compresor Power Craft
- Compresor Powerplus
- Compresor Porter-Cable
- Compresor Boss
- Compresor Laica
- Compresor Topcraft
- Compresor Scheppach
- Compresor Bavaria
- Compresor Technaxx
- Compresor Nilfisk
- Compresor Duro
- Compresor Omnitronic
- Compresor Zipper
- Compresor Fieldmann
- Compresor Eventide
- Compresor Truper
- Compresor Abac
- Compresor Kibani
- Compresor Emax
- Compresor Cocraft
- Compresor Herkules
- Compresor Toolcraft
- Compresor Eufab
- Compresor Aerotec
- Compresor SPL
- Compresor Westfalia
- Compresor Osram
- Compresor Holzmann
- Compresor Dedra
- Compresor Sthor
- Compresor POWERNAIL
- Compresor Anova
- Compresor Pansam
- Compresor Global
- Compresor Freeman
- Compresor Airman
- Compresor Merlin
- Compresor Aomni
- Compresor Numax
- Compresor Full Boar
- Compresor TOOLMATE
- Compresor Duro Pro
- Compresor California Air Tools
- Compresor Ilsco
- Compresor Hulk Power
- Compresor WilTec
- Compresor Cartrend
- Compresor MSW
- Compresor OKAY
- Compresor Creemers
- Compresor Hamron
- Compresor Robust
- Compresor Proviel
- Compresor Alphacool
- Compresor ExelAir
- Compresor TJM
- Compresor Prowork
- Compresor CMI
- Compresor TAURUS Titanium
Últimos Compresor Manuales
27 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
15 Octubre 2024
15 Octubre 2024
13 Octubre 2024
9 Octubre 2024
9 Octubre 2024
3 Octubre 2024