Proaim Astra Manual de Usario

Lee a continuación 📖 el manual en español para Proaim Astra (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
1
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Astra 8 & 12 Camera Jib Crane
A s s e m b l y M a n u a l
Astra comes with a back secon, a front secon with your
choice of camera mount, and vercal and horizontal
counterweight bars.
Camera Mount With Over Slung Mount.
Extension Secon -4
Extension Camera Plate
Vercal Counterweight Bar
LCD Mounng Bracket
Tightening knobs
2
Using Tripod Head
Remove the quick release plate from the tripod
head. Screw into the crane s mount, located on
the rear secon. 1/4”-20 & 3/8”-16 threads
available. Do not aempt to use the lt funcon
on the uid head with the crane aached.
With the stand mount aached to the crane,
set it on top of the stand s main sha. Insert
the knob into the groove, and ghten to
secure.
The rear secon has an interior connecng bar
extension out. This slides into the front secon
or extension. Tighten the knobs to secure the
secons together.
Aer inserng the connecng bar, insert the
knob into the coupler and ghten knob into
the groove.
Mounng on Support Stand:
Assembly for 8 Astra Jib
Connecng the Jib secons
Astra Jib Setup
Add the 4 extension secon to the rear
secon and secure properly. Next, aach the
main head secon to the extension secon.
Tighten the knobs to secure the secons
together.
Assembly for 12 Astra Jib
Extend your 8 crane to a 12 crane by adding the 4 extension.
4
For lower angle
For upper angle
Oponal Tilt Brake
For using lt funcon, loosen the knob to lt
the crane to the desired posion. Tighten back
the knob if you want to put a brake to lt
feature.
Monitor Mounng Bracket
To aach the monitor bracket, screw the knob
into the threaded hole on the crane s tripod
mount.
LCD/MONITOR are shown securely mounted
on jib.
For straight angle
Below is the manual lt funconality of the camera.
WARNING: when lng manually, always maintain control of the camera. A front heavy camera may
move forward abruptly without noce you need to be very careful at this point.

Especificaciones del producto

Marca: Proaim
Categoría: No categorizado
Modelo: Astra

¿Necesitas ayuda?

Si necesitas ayuda con Proaim Astra haz una pregunta a continuación y otros usuarios te responderán




No categorizado Proaim Manuales

No categorizado Manuales

Últimos No categorizado Manuales