Proaim CG219 Manual de Usario

Lee a continuación 📖 el manual en español para Proaim CG219 (5 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig Universal DSLR Camera Cage (CG219)
A s s e m b l y M a n u a l
Camera Cage with slide bars
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
3 x Allen Keys Sizes:
(3/16mm,4mm & 3mm)
Top Handle
Wooden Side Handle
Top Plate Camera Plate
2 x Slide Bars
2
DSLM Camera Cage Setup
Remove both the Allen bolts of the camera
plate with the help of a 3/16mm Allen key and
aach it to the boom part of the camera
cage.
Top Handle
Then Align the top plate with the camera cage
and secure it properly with the help of a
3/16mm Allen Key by inserng both the Allen
bolts on the top plate.
Place the top handle above the top plate.
NOTE: The provided mulple threads of the top
plate allow you to mount the top handle
anywhere according to your requirement.
Aer placing the top handle on the top plate,
match the bolt with the side threads of the
handle, insert the buon head, and ght it
with the help of a 4mm Allen key.
Remove both the Allen bolts on the top plate
with a 3/16mm Allen key.
Then secure it with the help of a 3/16mm
allen key.
NOTE: You can adjust both the top and base
plates to your requirements by loosening the
bolt and sliding it in.
3
The wooden side handle is now properly ght.
Interchange Slide Bars
Then remove the buon head from both sides
of the camera cage with the help of a 4mm
Allen key.
Match the provided screw hole on the boom
of the camera plate with the camera
hole and screw it ghtly with(Not Included)
the help of a screwdriver.
Side Handle
Match the wooden side handle with the side
thread of the camera cage and insert the side
handle and ghten it properly with its knob.
NOTE: You can hold the handle anywhere on the
provided mulple threads of the Camera Cage
according to your requirement.
Loosen the knob of the wooden side handle
and remove the handle.
Aach the Camera (Not Included) into the
Camera cage properly by sliding it onto the
shoe mount on the top plate.

Especificaciones del producto

Marca: Proaim
Categoría: No categorizado
Modelo: CG219

¿Necesitas ayuda?

Si necesitas ayuda con Proaim CG219 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Proaim Manuales

No categorizado Manuales

Últimos No categorizado Manuales