Proline MBX 8 Manual de Usario

Proline consola de mezclas MBX 8

Lee a continuación 📖 el manual en español para Proline MBX 8 (25 páginas) en la categoría consola de mezclas. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/25

SAFETY PRECAUTIONS

SAFETY PRECAUTIONS SAFETY PRECAUTIONS

• Ensure fingers are kept well away from the blades when in use.

• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.

• Do not push ingredients down the jug with your hands.

• Always operate on a flat surface.

• Ensure the toggle switch is in the off '0' position before plugging into the power outlet.

• Do not operate for more than 1 minute at a time.

• Read carefully and save all the instructions provided with this appliance

• Always turn the power off at the power outlet before you insert or remove the jug or blades.

• Do not unplug from the mains by pulling on the mains lead.

• Turn the power off and remove the plug when the appliance is not in use and before assembling, disassembling or

cleaning.

• Check that the voltage marked on the appliance rating plate matches your mains supply.

• Close supervision is necessary when your appliance is being used near children or infirm persons.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience an n supervision or instruction d knowledge, unless they have been give

concerning use of the appliances by a person responsible for their safety.

• Do not allow children to use this appliance without close supervision.

• Never leave an appliance unattended while in use.

• Keep out of reach of small children to ensure that they do not play with the appliance.

• Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that

move during use.

• This blender is only to be used with the stand provided.

• Do not use an appliance for any purpose other than its intended use.

• Do not place an appliance on or near a hot gas flame, electric element or on a heated oven.

• Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang over the edge of a table or counter top.

• Do not let the power cord touch any hot surface.

• Do not operate the appliance with a damaged cord or after the appliance has been dropped or damaged in any

way.

• Do not immerse the motor base or its lead in water or any other liquid.

• Avoid contacting moving parts. Always operate blender with lid in place.

• CAUTION: Ensure the blender is switched off before removing it from the stand.

• Always allow liquids to cool down to room temperature before placing them in the jug.

WARNING:

z This appliance is intended for domestic use only; any other use may invalidate the warranty and might be

dangerous.

Do not use this appliance within reach of a bath or a

sink or any vessel containing water or liquids. If the appliance

is dropped in water do not reach for it, switch off and disconnect at the mains and drain the water before retrieving

the appliance, do not use the appliance again until it has been checked by a qualified service agent.

z If the mains lead is damaged it must be replaced by the manufacturer, its service agent or similarly qualified

person with a lead of the same type and rating to avoid a hazard.

Accessible surfaces may get

hot, use handles at all times.

z Do not blend hot ingredients.

IDENTIFICATION OF PARTS

IDENTIFICATION OF PARTS IDENTIFICATION OF PARTS

1. Inner Cover

2. Lid

3. Glass Jug

4. Sealing Ring

5. Blade Unit

6. Jug Base

7. Jug Assembly

8. Motor Base

9. Pulse Button

Toggle Switch (1- 0- 2)

GETTING ST

GETTING STGETTING STARTED

ARTED

ARTED ARTED

Thoroughly clean all parts of the blender before you use the appliance for the first time (see chapter ‘CLEANING’).

ASSEMBLING THE JUG

ASSEMBLING THE JUG ASSEMBLING THE JUG

1. Assemble the Sealing Ring (4) on the blender Blade Unit (5).

2. Place the Blade Unit with the Sealing Ring into the Jug Base (6).

3. Mount the Glass Jug (3) onto the jug base unit and turn the jug base unit in the clockwise direction until it is fixed.

4. After you’ve added your ingredients in the jug, fix the Lid (2) onto the jug by pressing down firmly, making sure the

lip on the lid aligns with the jug spout.

5. Insert the Inner Cover (1) into the opening of the lid, and turn it in a clockwise direction until it is secure.

USING YOUR BLENDER

USING YOUR BLENDER USING YOUR BLENDER

Make sure the blender is unplugged and switched in the ‘0’ setting.

1. Place the blender jug on the motor base in right position.

2. Remove the lid or the inner cover from the blender jug and place ingredients into the jug.

3. Place the lid with the inner cover back onto the jug making sure the lip on the lid aligns with the jug spout. Do not

exceed the maximum indicated level – 0.8 liter.

4. Plug into the mains.

5. To start mixing the ingredients, set the toggle switch to the desired speed setting (1 or 2).

y The PULSE function remains on as long as the Pulse button is pressed down, for greater control when

blending, e.g. when chopping nuts or chocolates, or crushing ice.

y Speed setting 1 and 2 provide continuous blending until the toggle switch is turned to the ‘0’ position.

6. You can add further ingredients while blending. For this, remove the inner cover and drop ingredients through the

pouring hole. (Stop the blender first).

7. When finished blending, set the toggle switch to the ‘0’ position.

ATTENTION:

- Do not operate the blender without the cover in place.

- Do not run the motor continuously for more than 2 minutes.

- Allow the motor base to cool for 5 minutes after every 2 minutes of use.

10.

Especificaciones del producto

Marca:	Proline
Categoría:	consola de mezclas
Modelo:	MBX 8
Color del producto:	Black, Red
Ancho:	40 mm
Profundidad:	78 mm
Altura:	30 mm
factor vorm:	Ambidextrous
Banda de frecuencia:	2.4 GHz
Número soportado de baterías/baterías:	1
Destinado a:	Kantoor
Soporta Windows:	Ja
Número:	1
Uso recomendado:	Notebook
Rango de conexión:	8 m
Número de botones:	3
Conexión:	RF Draadloos
Soporta el sistema operativo Mac:	Ja
Color de superficie:	Patroon
Tipo de desplazamiento:	Wiel
Resolución de movimiento:	1200 DPI
Receptor suministrado:	Ja
tipo de botones:	Drukknoppen
Tecnología de detección de movimiento:	Optisch
Número de ruedas de desplazamiento:	1
Direcciones de desplazamiento:	Verticaal
Interfaz de receptor inalámbrico:	USB Type-A
Baterias-incluidas:	Ja
Tipo de Batería:	AA