Pyle PRJTPFL112 Manual de Usario

Lee a continuación 📖 el manual en español para Pyle PRJTPFL112 (6 páginas) en la categoría pantalla de proyección. Esta guía fue útil para 14 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Fixed Wall Mount Projector Screen
Universal Home/Office Projector
Viewing Display
- PRJTPFL102 100’ - inch
- PRJTPFL112 110’ - inch
- PRJTPFL122 120’ - inch
www.PyleUSA.com
2
Be sure to read this manual before use so you will know how to install
it properly. After you have nished reading these documents,
put them away in a safe place for future reference.
The content of this manual and the specications of the product it
describes are subject to change without prior notice.
• Note that PyleUSA will accept no liability whatsoever for injuries and
damages arising from incorrect use or handling that exceeds normal
operating limits.
IMPORTANT SAFETY INSTRUCTION
• Follow all installation instructions. Failing to do so, may lead to serious
consequences.
• Screens must be installed in accordance with the instructions.
Make sure that the wall mount projector is installed high enough so that
there is no risk of people bumping their heads. If a sufficiently high
installation cannot be made, be sure to take the necessary precautions
when the projector is used.
• Ensure that the screen is mounted securely.
• Operate within specied temperature and humidity range
• Do not operate screen before it is installed on wall.
• Make sure that the operating voltage of the screen corresponds to your
local voltage.
• Provide proper adult supervision when using the screen around children.
We strongly suggest that this item should be tted by a professional, we
will not be held responsible for any loss, incidental or consequential
damage.
• Do not install the projector in a location exposed to vibrations.
• After you have nished installation, keep this manual and accessories in a
safe place for future reference.
• Small parts could be swallowed by children and pets and should be kept
out of their reach. If your child swallows any small parts, consult a doctor
immediately.
Routine Inspections
Like the projector, the wall mount unit should be inspected once a year.
1. Check that the screws in the wall mount unit and adjusted parts are not
loose.
2. Check that the wall mount unit, adjusted parts and the set are not
scarred or damaged.
www.PyleUSA.com
3
INSTALLATION PROCEDURE
1. Open the carton and nd the square hole at both end of the polyfoam.
Take out the corner connector, hanging kit, Alan head screws, wrench,
and springs.
2. Lay the longer frame and shorter frame on a neat and soft ground. Place
the L-shape corner connector in the groove of both frames and join the
two frames together by the corner connector. Make sure the direction of
frame and connectors is correct. Drive the screws into the hole of
connectors and make sure the frames are joined in a right angle and
good tightness.
3. Stretch the screen and put the ber glass tube respectively according to
the length. Stretch the screen after the tubes are placed correctly. Put the
screen in vertical direction and make sure the screen is centered in the
frame. Use the spring hook to connect the hole on the frame and the
hole on the screen. Remember to work the springs hook on the four
corner of the frame rst before you work on hooks elsewhere. (smaller
hook of the spring for the frame and the bigger hook for screen.)

Especificaciones del producto

Marca: Pyle
Categoría: pantalla de proyección
Modelo: PRJTPFL112

¿Necesitas ayuda?

Si necesitas ayuda con Pyle PRJTPFL112 haz una pregunta a continuación y otros usuarios te responderán