QSC AD-C42T Manual de Usario

QSC Vocero AD-C42T

Lee a continuación 📖 el manual en español para QSC AD-C42T (40 páginas) en la categoría Vocero. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/40
*TD-000263-00*
TD-000263-00-C
AcousticDesignTM In-ceiling Loudspeakers User Manual
AD-C42T
105 mm (4”) two-way
2
EN
IMPORTANT SAFETY PRECAUTIONS
& EXPLANATION OF SYMBOLS
1- Read these instructions.
2- Keep these instructions.
3- Heed all warnings.
4- Follow all instructions.
5- Clean only with a dry cloth.
6- Install in accordance with QSC Audio Product’s instructions and a licensed, professional engineer.
7- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
8- Only use attachments/accessories from QSC Audio Products, LLC
9- Use only with mounts or brackets specified by QSC Audio Products.
10- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous” voltage within the product’s enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to humans.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this manual.
WARNING! Before placing, installing, rigging, or suspending any speaker product, inspect all
hardware, suspension, cabinets, transducers, brackets and associated equipment for damage.
Any missing, corroded, deformed or non-load rated component could significantly reduce the
strength of the installation, placement, or array. Any such condition severely reduces the safety of
the installation and should be immediately corrected. Use only hardware which is rated for the
loading conditions of the installation and any possible short-term unexpected overloading. Never
exceed the rating of the hardware or equipment. Consult a licensed, professional engineer when
any doubt or questions arise regarding a physical equipment installation.
© Copyright 2007, QSC Audio Products, LLC
QSC® is a registered trademark of QSC Audio Products, LLC
“QSCand the QSC logo are registered with the U.S. Patent and Trademark Office
All trademarks are the property of their respective owners.
Warranty
(USA only; other countries, see your dealer or distributor)
Disclaimer
QSC Audio Products, LLC is not liable for any damage to amplifiers, or any other equipment that is caused by negligence or improper
installation and/or use of this loudspeaker product.
QSC Audio Products 3 Year Limited Warranty
QSC Audio Products, LLC (“QSC”) guarantees its products to be free from defective material and / or workmanship for a period of three
(3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the defect
occurs under normal installation and use - provided the unit is returned to our factory or one of our authorized service stations via pre-
paid transportation with a copy of proof of purchase (i.e., sales receipt). This warranty provides that the examination of the return prod-
uct must indicate, in our judgment, a manufacturing defect. This warranty does not extend to any product which has been subjected to
misuse, neglect, accident, improper installation, or where the date code has been removed or defaced. QSC shall not be liable for inci-
dental and/or consequential damages. This warranty gives you specific legal rights. This limited warranty is freely transferable during
the term of the warranty period.
Customer may have additional rights, which vary from state to state.
In the event that this product was manufactured for export and sale outside of the United States or its territories, then this limited war-
ranty shall not apply. Removal of the serial number on this product, or purchase of this product from an unauthorized dealer, will void
this limited warranty.
Periodically, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please visit www.qscaudio.com.
Contact us at 800-854-4079 or visit our web site at www.qscaudio.com.
3
EN
Introduction
Congratulations and thank you for your ceiling loudspeaker purchase. The AD-C42T mod-
els offer excellent acoustic performance in an easy-to-install and attractive package.
Please review these instructions carefully and follow the recommendations. Consult a
licensed installation professional if you are uncertain about any mounting issues.
The AD-C42T models feature a 4” low frequency (LF) driver and a 3/4” dome high fre-
quency (HF) driver. The AD-C42T are equipped with an audio transformer suitable for 70V
and 100V distributed systems, as well as a tap-selector switch which can bypass the
transformer for 8 ohm applications.
What’s Included
Your ceiling loudspeaker box contains: - two loudspeaker cabinets
- two protective grill assemblies
- four support brackets for suspended ceiling installations
- two C-ring bracket for suspended ceilings and other ceiling reinforcing applications
- Self-tapping screws (M4.2 X 1.4 X 10mm) for securing the C-ring-to-support brackets
- two grill clips used for clipping the plastic grill retaining lines together
- two phoenix connector assemblies for connecting signal and daisy-chaining
- two paint shields
- two grille cloths
Installation Options
The AcousticDesign in-ceiling loudspeakers can be mounted in suspended ceilings, as well as non-suspended types. We recommend an
installation professional be consulted for safety assurance, quality installation, and optimum acoustic performance.
For suspended ceiling applications, the suspended ceiling support brackets must be used with the C-ring bracket. The suspended ceiling
support brackets are designed to accommodate 24” or 600 mm t-channel grid spacing. The brackets do not attach to the t-channel; the
angled “V” bend sits over the t-channel and will catch the t-channel in the event of a tile failure or fall-out.
For other ceiling types, the C-ring bracket can be used to reinforce the mounting surface. If the ceiling is suitably strong, the loud-
speaker can be secured in the cutout hole without additional reinforcement.
Audio connections are made directly to the ceramic terimainal block or by using Phoenix terminal block type connectors. Two sets of
terminals are provided; one set for the signal connection and another for pass-through (or daisy chain) connection to other loudspeakers
on the same distribution circuit.
Two safety features are provided, an enclosure-retaining safety tab and a grill-retaining safety tether. The enclosure tab is a metal tab
near or on top of the enclosure suitable for securing the loudspeaker to building framing; this provides maximum safety in the event the
supporting structure should fail.
Hardware Nomenclature
Suspended ceiling viewed from above.
(hardware may not be required for all installations)
Support Brackets
C-ring Bracket
Screws
Existing Suspended
Ceiling “T-Bars”

Especificaciones del producto

Marca: QSC
Categoría: Vocero
Modelo: AD-C42T

¿Necesitas ayuda?

Si necesitas ayuda con QSC AD-C42T haz una pregunta a continuación y otros usuarios te responderán




Vocero QSC Manuales

Vocero Manuales

Últimos Vocero Manuales