QSC SB-1180 Manual de Usario

Lee a continuación 📖 el manual en español para QSC SB-1180 (6 páginas) en la categoría Altavoz de subgraves. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
SB-1180
User Manual
SB-1180 Compact Subwoofer
*TD-000440-01*
TD-000440-01-C
2
TD-000440-01-C
EXPLANATION OF SYMBOLS
The term “WARNING” precedes instructions that concern personal safety. Failure to follow them may result in bodily injury or death.
The term precedes instructions that concern possible damage to physical equipment. Failure to follow them may result in equipment “CAUTION”
damage to equipment that may not be covered under the warranty.
The term “IMPORTANT” precedes instructions or information that are vital to the successful completion of the procedure.
The term precedes additional useful information.“NOTE”
TThe lightning flash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage within the
product’s enclosure that may constitute a risk of electric shock to humans.
The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!:
The SB-1180 loudspeaker is not designed to be hung or suspended. Mount or deploy this
loudspeaker system only on a floor or platform.
Read these instructions and keep a copy for future reference.
Strictly follow and heed all instructions and warnings.
Do not use or submerge this loudspeaker product in or near water or liquids.
Clean only with a dry cloth. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near, or into the loudspeaker.
Do not block any openings in the enclosure. Install in accordance with the manufacturer’s instructions.
Do not install the loudspeaker near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers).
Use extra caution with any attachments, accessories, mounts, or brackets that are not specified or approved by QSC, LLC.
Refer all service to qualified personnel. Service is required if the loudspeaker has been damaged in any way, such as liquid being spilled into it,
objects falling into it, exposure to rain or moisture, abnormal operation, or being dropped.
Observe all applicable local codes.
Warranty
For a copy of the warranty, visit the QSC website at www.qsc.com
Introduction
The SB-1180 extends QSC’s commitment to the cinema market by offering high-quality QSC sound for small room systems. Part of the DCS Digital
Cinema Speaker Series, the SB-1180 subwoofer offers a unique solution that addresses the extended low frequency requirements of E-Cinema or
D-Cinema in small room applications.
The SB-1180 features a single 18-inch (457 mm) woofer with 4-inch (102 mm) voice coil for extended bandwidth low frequency reproduction. With
an enclosure depth of less than 12 inches (300 mm), the SB-1180 is one of the narrowest subwoofers available, which dramatically reduces space
requirements behind the screen.
SB-1180 Package Contents
1 SB-1180 Loudspeaker
1 User Guide TD-000440
3TD-000440-01-C
Loudspeaker Connections
The SB-1180 is equipped with a four-position barrier strip with screw terminals that accept spade lugs or bare wire as large as 10 AWG. Inputs are
labeled
-
and
+
. Be sure to maintain consistent polarity from the amplifier to the loudspeaker’s input terminals. The parallel-wired output terminals
allow daisy-chain connection of additional loudspeakers; be sure to check the power amplifier’s specifications to avoid loads below the amplifier’s
minimum rated impedance.
Specifications
System Details SB-1180
Frequency Range 1 (-10 dB) 29 Hz to 170 Hz
Rated Noise Power (Voltage)2600 watts
Sensitivity 398 dB
Maximum continuous SPL 4125 dB
Maximum peak SPL 4131 dB
Rated Impedance 8 Ω
Maximum Recommended Amplifier Power 1200 watts
Transducer 18 in (457 mm) woofer
Enclosure Details
Input Connector 4–position barrier strip
Enclosure Material MDF, non-reflective black vinyl
Grille None
Dimensions (HxWxD) 35.9 × 30.2 × 11.7 inches (912 × 767 × 297 mm)
Net Weight 87 lb (39.5 kg)
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, unprocessed, -10 dB from on-axis sensitivity
2 AES2–1984 noise signal for 2 hours
3 On-axis, free-field sensitivity, 2.83 V, 1 m
4 Calculated from rated noise voltage and sensitivity
— Figure 1 —

Especificaciones del producto

Marca: QSC
Categoría: Altavoz de subgraves
Modelo: SB-1180

¿Necesitas ayuda?

Si necesitas ayuda con QSC SB-1180 haz una pregunta a continuación y otros usuarios te responderán




Altavoz de subgraves QSC Manuales

Altavoz de subgraves Manuales

Últimos Altavoz de subgraves Manuales