QTX U-MIC-864.8-L Manual de Usario

QTX micrófono U-MIC-864.8-L

Lee a continuación 📖 el manual en español para QTX U-MIC-864.8-L (7 páginas) en la categoría micrófono. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
U-MIC
Item ref: 171.8 171.8 14UK 15UK
USB Powered UHF Lavalier Microphone
User Manual
Version 1.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
171.814UK, 171.815UK User Manual
Introduction
Thank you for choosing the U-MIC for your wireless microphone requirements.
This system is designed to provide a reliable, cable-free solution with minimal
setup and ease of use. Please read and keep this user manual to get the best
results from your product and avoid damage through misuse.
Layout
Setting up
The U-MIC is supplied as a lavalier microphone, beltpack transmitter and USB
receiver with a 3.5mm to 6.3mm jack lead.
The USB type A plug (6) on the receiver should be connected to a USB port for
power (5V, 00mA). This can be from a USB power adaptor or power bank for 10
portable use if required. The connection can also be made to the receiver using
an optional USB extension lead if preferred.
Note: the audio is not transmitted to the USB port. The USB is for power only.
If the USB port is a U-Disk player or computer p t, the digital media (USB stick) or
or other peripheral device can still be connected through the receiver by
connecting to the USB type A socket (8) on the rear of the receiver.
1.
Volume control
2.
3.5mm lavalier mic input
3.
LED power indicator
4.
Power switch
5.
Battery compartment (rear)
6.
USB type A plug
7.
3.5mm audio output
8.
USB type A socket
171.814UK, 171.815UK User Manual
Operation
The U-MIC receiver is designed to connect to a microphone input channel on a
mixer or amplifier. Turn down the volume level on the microphone input of the
mixer or amplifier before connecting to avoid loud noises when connecting.
Connect the 3.5mm plug end of the supplied lead to the U- receiver (7) and MIC
the 6.3mm plug into appropriate microphone input channel. an
The beltpack transmitter has an on/off switch (4), which should be in the up
position (off). The top volume control (1) should be turned fully down. Connect
the lavalier microphone to the 3.5mm microphone input (2).
Slide open the cover of the battery compartment (5) and insert 2 x AA alkaline
batteries, ensuring that the polarity is the correct way around.
Move the switch down 3) should to the “on” position and the power indicator (
light. Note that the switch has a centre position which is also . on
Gradually turn up the volume control on top of the transmitter and the level on
the mixer or amplifier and speak into the lavalier microphone until the sound can
be heard through the connected speakers or recording equipment. Increase the
volume to the required level.
If the microphone is not being used, turn down the volume level on the top of the
beltpack transmitter and the mixer/amplifier and switch the power off.
For long term storage, unplug the jack and USB receiver and remove the
batteries f m the beltpack transmitter. ro

Especificaciones del producto

Marca: QTX
Categoría: micrófono
Modelo: U-MIC-864.8-L

¿Necesitas ayuda?

Si necesitas ayuda con QTX U-MIC-864.8-L haz una pregunta a continuación y otros usuarios te responderán




micrófono QTX Manuales

QTX

QTX J-MIC Manual de Usario

12 Septiembre 2024
QTX

QTX VHN2 Manual de Usario

12 Septiembre 2024

micrófono Manuales

Últimos micrófono Manuales