Quadral Subwoofer Manual de Usario

Quadral Oradores Subwoofer

Lee a continuación 📖 el manual en español para Quadral Subwoofer (21 páginas) en la categoría Oradores. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/21

USER INSTRUCTIONS

BEDIENUNGSANLEITUNG

NOTICE D´UTILISATION

MANUAL DE INSTRUCCIONES

ENGLISH · DEUTSCH · FRANÇAIS · ESPAÑOL

ENGLISH

First of all, congratulations on your purchase of an active subwoofer from

quadral. It is with discerning music lovers and connoisseurs like yourself in

mind that we build hi-fi and surround speakers to standards way beyond

the norm. On the following pages we would like to give you some useful tips

on setting up, connecting up and operating your quadral active subwoofer to

ensure many hours of pure listening pleasure.

Safety notes on active loudspeakers

Please read these user instructions carefully and follow all recommended steps towards putting

your system into operation. You should at all times be aware of and take note of the warnings

and safety instructions on the device and in these user instructions. Keep these user instruc-

tions in a safe place so you can find them straight away if you should have any queries or

problems at a later date.

• Your set has been drafted for the usage at 115 V~ 60 Hz or 230 V~ 50 Hz mains supply. Please

make sure before using the system, that the corresponding working voltage for your country has been

adjusted on the back of the set (by delivery it is 230 V~ 50 Hz).

• Lay the mains cable and other cables in such a way that they cannot be stepped upon, or crushed

or damaged by spikes or furniture, or cause anyone to trip over them. The mains plug shall remain

readily operable.

• When removing the mains cable from the wall socket, do so by pulling the plug out and not by tug-

ging the cable itself.

• Unplug the mains cable in the event of storms or if you are not going to be using the system for a

longer period of time.

• The loudspeaker connection terminals (High Level Input) may only be used in conjunction with the

corresponding amplifier outputs or satellite speakers. Connection of any kind between these terminals

and the mains supply (230V/115V) is prohibited and will lead directly to the immediate destruction of

the loudspeaker and all connected products. For this reason it is essential to avoid fitting these cable

connections with plugs which could in any way whatsoever be confused with mains plugs.

• At high volumes and depending on the connected power amplifier, voltages of over 30V can be

present at the loudspeaker connection terminals marked High Level Input. These terminals should

therefore on no account be touched while the system is active.

• Our subwoofers are desigend for use in normal living roomes and moderate climates only and should

never be set up and operated in damp rooms or tropical climates. They never get in touch with drip-

ping or splashing water. Furtheron no objects filled with liquids, such as vases, should be placed on

the sets.

• Massive overloading of loudspeakers due to excessively high volume levels can, under certain

circumstances, lead to the fusing of individual elements or speakers in spite of safeguards. Theoreti-

cally, overloading to this extent can even cause fire inside a loudspeaker, so it is advisable to keep

loudspeakers under surveillance when being operated at such outer technical limits.

• Faulty safeguarding, if accessible from outside, has to be replaced only by equal types.

• The temperature of the rear heat sink can rise to over 60°C when the unit is used over a longer period

of time at high volumes, so please at all times avoid touching it when it is active.

ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

Contents/Inhalt/Sommaire/Índice

Safety notes 3-4

Setting up 5

Operation modes 5

Connecting up 6-8

Starting up 9

Operating the subwoofer 10

Maintenance of loudspeakers 10

Possible operation errors 11

Sicherheitshinweise 12-13

Aufstellung 14

Betriebsarten 14

Anschluss 15-17

Inbetriebnahme 18

Betrieb des Subwoofers 19

Pflegehinweise 19

Mögliche Bedienungsfehler 20

Consignes de sécurité 21-22

Installation 23

Modes de fonctionnement 23

Raccordement 24-26

Utilisation 27

Raccordement du caisson de grave 28

Entretien 28

Erreurs d’utilisation possibles 29

Instrucciones de seguridad 30-31

Disposición 32

Modes operativos 32

Conexión 33-35

Activación 36-37

Funcionamiento del subwoofer 37

Instrucciones de mantenimiento 38

Posibles fallos de funcionamiento 39

ENGLISH

Setting up

Besides the unit’s actual settings, a subwoofer’s bass reproduction essentially depends on

where the unit is positioned in the listening room. Proximity to walls or even placement in a

corner makes the bass sound come over louder – but also less well defined and accurate –

than if in a more free-standing position. Since the acoustic characteristics differ from room to

room, we recommend finding the optimum compromise between bass volume and precision

by simple trial and error. It won’t matter if you set up the subwoofer nearer to the left hand sat-

ellite than the right hand one – or vice versa – since the low bass sounds are not localizable.

If your subwoofer directs its sound downwards, you must fit the supplied loudspeaker foot,

which can be designed as „spikes“ as well (depending on the model), before you start to use

the system.

Operating modes

Units with a POWER switch and stand-by function:

If the mains POWER switch is in OFF position, the unit is turned off completely.

If the mains POWER switch is in ON position, the switch for stand-by operates as follows:

ON: The unit is permanently switched on.

AUTO: The unit switches on automatically, if a music signal is received and auto-

matically switches to stand-by mode after approximately 15 minutes, if no

music signal is received.

OFF: The functions are switched off.

• When operating your subwoofer, on no account ever lay it with the panel containing the switches,

controls and input/output sockets facing down as this could cause the unit to overheat; please ensure

a minimum distance of 5cm around the apparatus for sufficent ventilation. The woofer, the bass

reflex opening and possible existing ventilation openings should never be covered with items such as

newspapers, table-cloths, curtains, etc.

• On no account ever insert a hand, arm or any object into a bassreflex opening as this could cause

injury or material damage. At particular risk in this respect are children and pets.

• Allow no-one but appropriately qualified service engineers to carry out technical maintenance and

repair work on your active loudspeaker. This will be necessary in the event of any form of damage,

i.e. damaged mains cables and plugs, or when some object has fallen onto the speaker cabinet or

if the unit itself has fallen over or been dropped, or if it has been penetrated by any type of liquid.

Never open up the device yourself since any physical contact whatsoever with the mains voltage

(230V/115V) can have fatal consequences.

• Never use active loudspeakers as seating or climb up on them (instead of using a ladder)!

• Your loudspeaker units have been designed for long years of home use and should not therefore be

used for professional purposes.

• For the purposes of mounting and placement of these products, please only use furniture and other

devices that are obtainable from the manufacturer and marketed for or together with the product in

question. Take extreme care when moving any table devices or shelves upon which the products are

placed as the units could otherwise tip or fall over and cause damage or injury.

• Avoid placing your loudspeakers anywhere with high levels of humidity or dampness. Permanent

relative humidity or exposure to direct sunlight (UV radiation) can cause warping of wooden speaker

cabinets or lead to their premature aging and thus affect the unit's performance. Besides, do not

position the subwoofer directly adjacent to sources of heat, e.g. radiators. Moreover, do not place

naked flame sources, such as lighted candles on the speaker cabinet.

• Our fitting accessories should only be used to install products that we have specifically designed for

wall mounting. Take special care to ensure that all components are securely screwed into place! We

also recommend using additional safeguards, for example chains, etc. to ensure secure and safe

mounting.

• Loudspeakers in operation for long periods at excessively high volume levels are not only a source

of disturbance for neighbours but can also have serious health-related consequences for the user as

well!

• Loudspeakers without magnetic shielding can cause discoloration or distortion of the TV picture. To

avoid this, place non-shielded loudspeakers at least 50 cm clear of the TV set. Please avoid deposit-

ing, for example, credit cards, diskettes, audio or video cassettes or any other form of magnetic data

carriers on the speaker cabinet as this could otherwise lead to loss of data stored on such objects.

Likewise, do not place and operate magnetic tape devices in the direct vicinity of such loudspeakers.

• Please do not throw the packaging away as you might possibly need it for transportation of the loud-

speaker system at a later date. Keep the polythene bags out of the reach of children since

they can cause asphyxiation if used for any other than their intended purpose.

POWER

ONOFF

Especificaciones del producto

Marca:	Quadral
Categoría:	Oradores
Modelo:	Subwoofer
Color del producto:	Grijs
Peso.:	952 g
Ancho:	282 mm
Profundidad:	222 mm
Altura:	111 mm
Peso del embalaje:	3629 g
Bluetooth:	Nee
Número de puertos USB 2.0:	3
Puerto(s) VGA (D-Sub):	1
Número de puertos Ethernet LAN (RJ-45):	1
Certificación:	MIL-STD 810G 514.5, SAE J1455
Salida de audio:	Ja
hdmi:	Ja
Certificados de sostenibilidad:	RoHS
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	1
Compatibilidad:	Getac F110
Tipo de dispositivo estándar:	Tablet