RC4WD Z-E0106 Manual de Usario

RC4WD cargador de bateria Z-E0106

Lee a continuación 📖 el manual en español para RC4WD Z-E0106 (1 páginas) en la categoría cargador de bateria. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/1
Battery Charging
Input Voltage
Output Current
Charging Model
Charging Capability
100VAC~240VAC
650MA
pre-charged, steady current,
monitoring, automatic protection
5-8 NiMH batteries
SPECIFICATIONS
WARNING
The charger can get hot during use. Use the charger in a well ventilated area, away from people and electrically conductive
or inflammable materials.
If the battery has suspicious reactions during the charge or discharge, such as overheating, venting or leaking, immediately
disconnect the battery and store it in a safe location, away from people and inflammable materials.
This charger is designed to charge only 5~8 Cell NiMH batteries.
Make sure that the battery is compatible with the charger’s charge
rate.
Never let children operate unsupervised while charger is in use.
Adult supervision is recommended at all times.
The charger is for indoor use only. Do not use in case of high humidity
conditions or condensation.
Do not attempt to open or modify the charger’s case.
Do not let objects or liquids penetrate the charger’s cooling vents.
1. Charge only batteries that are cool to the touch and are not
damaged (swollen, bent, broken or punctured).
2. Connect the charger to the proper wall receptacle noting
proper polarity.
3. Plug the battery’s connector into the charger’s connector.
The LED will light red as it is charging.
4. The charger will emit a tone and the LED will change to
green once fully charged. NOTE: Monitor the battery during
the charge and end the charging process if the charger or
battery becomes very hot.
5. Always unplug the battery from the charger immediately
upon completion of charging.
CAUTION: Overcharging a battery can cause a fire.
RC4WD Universal NIMH Peak
Battery Charger Instructions
CAUTION Please read these instructions
carefully prior to using!
100-0072

Especificaciones del producto

Marca: RC4WD
Categoría: cargador de bateria
Modelo: Z-E0106

¿Necesitas ayuda?

Si necesitas ayuda con RC4WD Z-E0106 haz una pregunta a continuación y otros usuarios te responderán


cargador de bateria RC4WD Manuales

RC4WD

RC4WD Z-E0106 Manual de Usario

12 Septiembre 2024

cargador de bateria Manuales

Últimos cargador de bateria Manuales

Nitecore

Nitecore UHX1 PRO Manual de Usario

27 Octubre 2024
Nitecore

Nitecore EMR05 TAC Manual de Usario

26 Octubre 2024
Bosch

Bosch GAA12V-21N Manual de Usario

24 Octubre 2024
Panasonic

Panasonic CF-VCB331 Manual de Usario

24 Octubre 2024
Ryobi

Ryobi One+ RC18627 Manual de Usario

21 Octubre 2024
Alecto

Alecto BL-179 Manual de Usario

19 Octubre 2024
Graupner

Graupner Ultramat 12 Manual de Usario

16 Octubre 2024
Graupner

Graupner ULTRA DUO PLUS 30 Manual de Usario

16 Octubre 2024
MSW

MSW S-CHARGER-20A.2 Manual de Usario

15 Octubre 2024
MSW

MSW S-CHARGER-10A.2 Manual de Usario

15 Octubre 2024