RCBS Cowboy Dies Manual de Usario

RCBS No categorizado Cowboy Dies

Lee a continuación 📖 el manual en español para RCBS Cowboy Dies (12 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
COWBOY DIES
P R O D U C T I N S T R U C T I O N S
PARTS LIST FOR 3 DIE SET
1
11
Note:The photo above is not the actual RCBS Cowboy Die set, but represents the components of a three die set.
KEY PART # DESCRIPTION
1 709644 Lock Ring 1/2-20
2 Sizer Die
3 709617 Decapping Rod
4 709618 Decap Pin Holder
5 90164 Decapping Pin
6 709646 Lock Ring 7/8-14
7 709645 Lock Ring 9/16-18
8 – Expander
9 Expander Die Body
10 Seater Plug
11 Seater Die Body
IMPORTANT: READ THIS SECTION FIRST
Before using the RCBS Cowboy Dies, read the instruction manual carefully to fully learn
how to safely operate the related reloading equipment. Failure to properly operate certain
reloading equipment can result in severe personal injury and/or equipment damage. If you
have read these instructions and still do not understand some operation, call us at 1-800-
533-5000 and a technician will assist you. This instruction manual contains specific safety
and operating information. It should be considered a permanent part of your reloading
equipment and remain with the equipment at all times for easy reference.
SAFETY
Reloading is an enjoyable and rewarding hobby that can be conducted safely. But, as with
any hobby, carelessness or negligence can make reloading hazardous. This product has
been designed from the beginning with the user’s safety in mind. When reloading, safety
rules must be followed. By observing these rules, the chance of a hazardous occurrence
causing personal injury or property damage is minimized.
GENERAL
Use all equipment as the manufacturer recommends. Study the instructions carefully
and become thoroughly familiar with the operation of the product. If you do not
have written instructions, request a copy from the equipment manufacturer.
Don’t take short cuts. Attempting to bypass established procedures is an invitation
to an accident.
Observe good housekeeping” in the reloading area. Keep tools and components
neat, clean and orderly. Promptly and completely clean up primer and powder spills.
Reload only when you can give your undivided attention. Do not reload when
fatigued or ill, or under the influence of medications or alcohol. Develop a reload
ing routine to avoid mistakes which may prove hazardous. Dont rush - load at a
leisurely pace.
Always wear adequate eye protection to protect your eyes from flying particles. You
assume unnecessary risk when reloading without wearing safety glasses.
LOADING DATA
Use only laboratory tested reloading data. We highly recommend the current
SPEER Reloading Manual.
OBSERVE ALL WARNINGS ABOUT THE USE OF MAXIMUM LISTED
LOADS.
PRIMERS AND POWDER
• Store primers and powder beyond the reach of children and away from heat, damp-
ness, open flames and electrical equipment. Avoid areas where static electricity is evi-
dent.
• Do not use primers of unknown identity. Scrap unknown primers in accordance with
applicable regulations.
• Keep primers in the original factory container until ready to use. Return unused
primers to the same factory packaging for safety and to preserve their identity. Primer

Especificaciones del producto

Marca: RCBS
Categoría: No categorizado
Modelo: Cowboy Dies

¿Necesitas ayuda?

Si necesitas ayuda con RCBS Cowboy Dies haz una pregunta a continuación y otros usuarios te responderán




No categorizado RCBS Manuales

No categorizado Manuales

Últimos No categorizado Manuales