RCBS M1000 Manual de Usario

RCBS No categorizado M1000

Lee a continuación 📖 el manual en español para RCBS M1000 (20 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/20
M1000 MECHANICAL SCALE
PRODUCT INSTRUCTIONS
170227
WARNING!
Before using this product, read and follow these instructions carefully. Failure to
do so could result in serious injury or death, or property damage.
If you have any questions while assembling or operating this product,
call us at 1-800-379-1732 (U.S. or Canada)
Monday – Friday 5:00 a.m. – 5:00 p.m. Pacic Time
Or email us at rcbs.tech@vistaoutdoor.com
This manual contains important safety and operating information. Keep this as a
permanent part of your reloading equipment. If lost, contact us for a replacement.
1
GUNPOWDER WARNINGS
WARNING! Keep out of reach of children
• Store powders in their original package in a cool, dry environment free from wide temperature
variations.
• Keep cans tightly sealed and labels intact.
• Markdateofpurchaseoncan,forfuturereference.Useolderstockrst.
• Never use glass as a storage container. This may cause a “greenhouse effect” raising temperature
in container and degrade the powder.
• Checkcansandpowderforsignsofdegradation.Manypowderswillexhibitanered-browndust
on the granules and/ or inside the container when this happens. If it does, do not use propellant;
dispose of it properly in compliance with local regulations.
• DO NOT have more than one can of powder on the bench at one time. Powder Cans should be
stored away from the bench to avoid picking up the wrong one.
• DONOTuseanypowderunlessitsidentityispositivelyknown.Theonlypositiveidenticationis
the manufacturer’s label on the original canister. Properly discard all mixed powders and those of
uncertain identity in compliance with local regulations.
• If you use a powder measure, replace the lids on both the Powder Hopper and Powder Can after
thePowderHopperhasbeenlled.
• When using a Powder Measure, settle the powder in the Powder Hopper before charging any
cases. Throw and check the weight of at least ten (10) charges. This will assure you that the
correct powder charge is being thrown.
• Whenyounishareloadingsession,pouranyremainingpowderbackintoitsoriginalfactory
container. This will preserve the identity and shelf life of the powder.
• DO NOT smoke while reloading.
RELOADING SAFETY
NOTICE - This manual is not intended to provide comprehensive instructions or safety infor-
mation on how to reload, or handle or use reloading components. Always read and thoroughly
understand a reloading manual before attempting to reload ammunition.
Reloading is an enjoyable and rewarding hobby when conducted safely. But, as with many hobbies,
carelessness or negligence can make reloading hazardous. When
reloading, always follow these safety guidelines to minimize the risk of personal injury or death.
• Always wear safety glasses.
• Understand what you are doing and why. Read handbooks and manuals on reloading. Talk to
experienced reloaders. Write or call suppliers of equipment or components if you have questions
or are in doubt.
• Read and understand all warnings and instructions accompanying your equipment and
components. If you do not have written instructions, request a copy from the manufacturer. Keep
instructions for future reference.
• Don’t rush or take short cuts. Establish a routine and follow it at a leisurely pace.
• Keep complete records of reloads. Label each box showing the date produced, and the type of
primer, powder and bullet used.
• Donotsmokewhilereloading,orreloadnearsourcesofheat,sparksorame.
• Observe good housekeeping in the reloading area. Keep tools and components neat, clean and
orderly. Promptly and completely clean up any spills.
• Keepyourhandsandngersawayfrom“danger”spotsandpinch-pointswheretheymightbe
injured.
• Keep all reloading equipment and components out of reach of children.
• Stay alert. Reload only when you can give your undivided attention. Do not reload when tired, ill,
rushedorundertheinuenceofdrugsoralcohol.
Because RCBS® has no control over the choice, assembly or use of components or other reloading
equipment, RCBS assumes no liability, expressed or implied, for the use of ammunition reloaded
with this product.
2

Especificaciones del producto

Marca: RCBS
Categoría: No categorizado
Modelo: M1000

¿Necesitas ayuda?

Si necesitas ayuda con RCBS M1000 haz una pregunta a continuación y otros usuarios te responderán


No categorizado RCBS Manuales

RCBS

RCBS Rock Chucker Supreme Auto Prime Manual de Usario

15 Septiembre 2024
RCBS

RCBS Trim Pro 2 Manual de Usario

12 Septiembre 2024
RCBS

RCBS Lead Thermometer Manual de Usario

10 Septiembre 2024
RCBS

RCBS Powder Trickler-2 Manual de Usario

10 Septiembre 2024
RCBS

RCBS Case Activated Linkage Kit Manual de Usario

10 Septiembre 2024
RCBS

RCBS Lube-A-Matic 2 Manual de Usario

9 Septiembre 2024
RCBS

RCBS M1000 Manual de Usario

7 Septiembre 2024
RCBS

RCBS Cowboy Dies Manual de Usario

7 Septiembre 2024
RCBS

RCBS Rangemaster 2000 Manual de Usario

7 Septiembre 2024
RCBS

RCBS Pro Melt 2 Manual de Usario

7 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024