Revox C100 Manual de Usario

Revox Mando a distancia C100

Lee a continuación 📖 el manual en español para Revox C100 (11 páginas) en la categoría Mando a distancia. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/11

C100 Multiuser Remote Control

The C100 IR remote control is a universal remote control for the Multiuser system from Revox. It

can be used to control all Multiuser devices that have a built-in or external infrared receiver. The

M300 and M500 have built-in IR receivers, but can also be supplemented with an external IR

receiver M204 or the C18 Multiuser Wall Control. Our V219 or M30 side room amplifiers, as

installation products, do not have built- IR receivers, but can also be equipped with external IR in

receivers.

The C100 can be used to cover all the everyday basic functions provided by the Multiuser system.

For example, the selection of up to 4 users and their user favourites stored in the Multiuser App.

These basic functions are already stored in the Multiuser Configurator. Through extended

programming (by specialist personnel), many other additional functions can be handled by the C100.

In doing so, the configurator determines which functions the IR command sent is to perform. Via a

proxy, even IP commands can be sent to other units in the home network.

In addition to controlling the multi-user system from Revox, the C100 has an IR database for

countless TV manufacturers. This means that a TV set can also be controlled in basic terms. An

overview of the different manufacturers can be found at the end of these operating instructions.

The selection is made by entering a 4-digit numerical code.

Battery replacement

If the batteries of the remote control become weaker over time, which is noticeable in a shortened

range, they can easily be replaced. To do this, remove the battery cover on the back of the remote

control and use the tip of a biro to prise out the batteries at the points marked in red. Insert the

new batteries, making sure that the polarity is correct. The batteries should be replaced in pairs.

Back view C remote control : 100

Replacement batteries : 2 St. CR2032 / 3V

Disposal of the batteries

Original equipment batteries do not contain any harmful substances such as cadmium, lead and mercury. According to

the Battery Ordinance, used batteries must not be disposed of with household waste. Dispose of used batteries free of

charge in the collection containers provided by retailers. You will also find a collection container for used batteries at

your specialist dealer.

Button

Multiuser command

- d - re LED

Muliuser RC5 code

Adr./ c ommand

TV command

- gre - en LED

Revox OFF

Revox Off 1

29 / 39

Power TV

Power TV ²

Number 1

29 / 01

Number 2

29 / 02

2 / ABC

Number 3

29 / 03

3 / DEF

Number 4

29 / 04

4 / GHI

Number 5

29 / 05

5 / JKL

Number 6

29 / 06

6 / MNO

Number 7

29 / 07

7 / PQRS

Number 8

29 / 08

8 / TUV

Number 9

29 / 09

9 / WXYZ

Number 0

29 / 00

29 / 50

Back

29 / 31

29 / 40

Play

29 / 48

Pause

29 / 54

Stop

29 / 35

29 / 37

Left

29 / 45

29 / 38

Right

29 / 36

Down

29 / 29

Fast rewind

29 / 28

Fast forward

29 / 49

Recording

29 / 41

Red

29 / 42

Green

29 / 43

Yellow

Note Power button:

1 C100 in Multiuser mode: Multiuser power command is sent immediately.

C100 in TV mode: push button < 2 seconds, switch to Multiuser mode. Push button = 2 seconds pressed, switch to Revox Off >

Multiuser mode and Multiuser power command is sent. Alternatively, one of the 8 user (favourite) buttons or one of the 3

input buttons can be pressed.

² TV model not programmed, C100 remains in Multiuser mode (TV-LED illuminates 3 seconds on release -> error detection)

C100 in TV mode: command is sent immediately. Power TV

C100 in Multiuser mode: push button < 2 seconds, changeover to TV mode. Push button > = 2 seconds, Power TV

switch to TV mode and the TV Power command is sent. Alternatively, the source key can be pressed.TV

³ Delivery status for volume function :

The code can be used to switch between the Multiuser and the TV volume functions, so that in TV mode either the 0 0 0 0

original TV commands the RC5 commands for the Multiuser system are sent. or

29 / 44

Blue

Volume up

29 / 20

Volume up³

Volume down

29 / 21

Volume down³

Mute³

29 / 13

Mute³

29 / 30

Channel_up

29 / 18

Channel_up

Channel_down

29 / 19

Channel_down

Favourite User 1 of

29 / 56

Favourite User 2 of

29 / 57

Favourite User 3 of

29 / 58

Favourite User 4 of

29 / 59

User 1

29 / 63

User 2

29 / 55

User 3

29 / 60

User 4

29 / 61

Analogue input

29 / 51

Coaxial input

29 / 52

Optical input

29 / 53

63 / 03

Exit

Function 1

29 / 10

Exit

Info

Function 2

29 / 11

Info

EPG

Function 3

29 / 46

EPG

Format

Function 4

29 / 47

Format

Especificaciones del producto

Marca:	Revox
Categoría:	Mando a distancia
Modelo:	C100
Peso.:	480 g
Ancho:	99 mm
Profundidad:	33 mm
Altura:	226 mm
Fuente de alimentación:	DC 12V/2A
Capacidad del acumulador/batería:	1200 mAh
Bluetooth:	Nee
Diagonal de la pantalla:	3.5 "
Resolución:	- Pixels
Pantalla táctil:	Ja
Frecuencia del procesador:	0.52 GHz
Familia de procesadores:	PXA 270
Estándares wifi:	802.11b, 802.11g
GPS:	Nee
Resolución de la cámara trasera (numérica):	2 MP
Incluye sistema operativo:	Windows CE 5.0
Cables suministrados:	USB
Tarjetas de memoria compatibles:	SD
Interfaz:	USB 1.1, RS-232
Micrófono incorporado:	Ja
Memoria interna:	0.128 GB
Duración de la batería/duración de la batería:	1 uur
Tipo de memoria interna:	SDRAM
Cámara integrada:	Ja
Tipo de comida:	DC
Fabricante del procesador:	Intel
Red de datos:	Niet ondersteund
Memoria flash:	0.064 GB
Rango de temperatura de funcionamiento:	32 - 122 °F
Función telefónica:	Nee
Lector RFID:	Nee
Lector de código de barras:	Nee
Wifi.:	Ja
Humedad relativa de funcionamiento (VV):	5 - 95 procent
Tecnología de batería:	Lithium-Ion (Li-Ion)
Batería/tiempo de recarga de batería (encendido):	12 uur