Rodcraft RC2235 Manual de Usario
Rodcraft
maquina de atornillar
RC2235
Lee a continuación 📖 el manual en español para Rodcraft RC2235 (36 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/36
Operator’s Manual
RC2235
Impact Wrench
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 8956000026, before performing any such task.
8956001277 rev 02 - 09/2016
6.3 bar
90 PSI
MN2-14 (8940168574) (1/4”)
MD2-12 (8940168576) (1/2”)
MN3-14 (8940168575) (1/4”)
MD3-12 (8940168577) (1/2”)
8951011861 (1l)
8951011784 (1/4” AG)
8951011786 (1/2” AG)
STAR
8951011796 (Ø9)
8951011791 (Ø9)
8951011796 (Ø9)
8951011836 (Ø9)
30 to 50 cm hose
8951011836
8951011831 (Ø8x5m)
8951011833 (Ø8x8m)
8951011835 (Ø8x10m)
5g
Fwd. / Rev
RF
Rev. max Fwd min Fwd max
Fig. 01
Fig. 02
Air diagram
Model
Drive
Torque
Speed Weight Inner Hose
Dia.
Dimensions
L x H x W
Air consumtion
Air Inlet
Sound-
Pressure
LpA
Sound-
Power
LwA
Vibrations
Working Max At load Average ahd k
L
W
H
1 2 3 4 5 6 7 8 9 10 11
[inch] [Nm] [Nm] [min-1] [kg] [inch.] [mm] [Nl/s] [inch] [dB(A)] [dB(A)] [m/s²] [m/s²]
RC2235 1/2" 60-220 300 7400 1.85 3/8" 341.5x80x58 6.8 1.7 1/4'' 97 108 43.5 4.8
H
L
A
B
TECHNICAL DATA
Model
Drive
Torque
Speed Weight Inner Hose
Dia.
Dimension
L x W x H
Air Consumption
Air Inlet
Sound pres-
sure
LpA
Sound power
LwA
Vibrations
ahd k
Working Max Average continuous
W
L
1 2 3 4 5 6 7 8 9 10 11
[inch] [Nm] [Nm] [min-1] [kg] [inch] [mm] [NL/s] [inch] [dB(A)] [dB(A)] [m/s²] [m/s²]
max. pressure 6.3bar(90psi)
ah : Vibration level Uncertainty ; k L
pA Sound pressure dB(A), K
pA K= WA
= 3 dB Uncertainty .
Declaration of noise and vibration statement (ISO 15744 and ISO 28927-2)
All values are current as of the date of this publication. For the latest information please visit www.rodcraft.com.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared va-
lues of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way
the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user. We, RODCRAFT PNEUMA-
TIC TOOLS , cannot be held liable for the consequences of using the declared values, instead of values reecting the actual exposure, in an individual risk
assessment in a work place situation over which we have no control. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf. We
recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures
can be modied to help prevent future impairment.
MACHINE TYPE(S)
• This product is designed for installing and removing threaded fasteners in wood, metal and plastic. No other use permitted. For professional use only.
• Please read the instructions carefully before starting the machine.
OPERATION
• Fix the accessories properly to the tool.
• Connect device as shown in Fig. 01 to a clean and dry air supply.
• To start the machine, pull the trigger (A). Release the trigger to stop.
• To switch rotation, turn the switch (B) as shown in Fig. 01.
• Use the reverse switch (B) only when the drive spindle comes to a complete stop. Changing the speed before the drive spindle stops may damage the
machine.
• To adjust output power, turn the regulator (B) as shown in Fig. 01.
LUBRICATION
MOTOR CLUTCH
• Use an air line lubricator with SAE #10 oil, adjusted to two drops per minute. If an air
line lubricator cannot be used, add air motor oil to the inlet once a day.
Recommended lubricant : 8951011861
• Use synthetic clutch Grease 8951012205 : 0.17 oz. (5 g).
MAINTENANCE INSTRUCTION
• Follow local country environmental regulations for safe handling and disposal of all components.
• Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised
dealer for advice on technical service or if you require spare parts.
• Always ensure that the machine is disconnected from energy source to avoid accidental operation.
• Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts.
• High wear parts are underlined in the parts list.
DISPOSAL
• The disposal of this equipment must follow the legislation of the respective country.
• All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
• Repair only by technical maintenance staff.
EU DECLARATION OF CONFORMITY
We : Rodcraft Customer Center Langemarckstr.35 bis 45141 Essen- Germany
Machine type(s) : Impact Wrench
Declare under our sole responsibility that the product(s) : RC2235 00001 - 99999 Serial Number :
Origin of the product : Taiwan
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to “Machinery“ : 2006/42/EC
(17/05/2006)
applicable harmonised standard(s) : EN ISO 11148-6:2012
Name and position of issuer : Pascal Roussy (R&D Manager)
Place & Date : Saint-Herblain 08/2016,
Technical le available from EU headquarter. Pascal Roussy R&D manager CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain - France
Copyright 2016, Rodcraft
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part
numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
EN English (English) RC2235
impact wrench
Original Instructions
Especificaciones del producto
Marca: | Rodcraft |
Categoría: | maquina de atornillar |
Modelo: | RC2235 |
¿Necesitas ayuda?
Si necesitas ayuda con Rodcraft RC2235 haz una pregunta a continuación y otros usuarios te responderán
maquina de atornillar Rodcraft Manuales
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
maquina de atornillar Manuales
- maquina de atornillar Bosch
- maquina de atornillar AEG
- maquina de atornillar DeWalt
- maquina de atornillar Silverline
- maquina de atornillar Ferm
- maquina de atornillar Gude
- maquina de atornillar Omega
- maquina de atornillar Makita
- maquina de atornillar Hitachi
- maquina de atornillar Black And Decker
- maquina de atornillar Vonroc
- maquina de atornillar Stanley
- maquina de atornillar Skil
- maquina de atornillar Yato
- maquina de atornillar Hilti
- maquina de atornillar Ryobi
- maquina de atornillar Festool
- maquina de atornillar Metabo
- maquina de atornillar Parkside
- maquina de atornillar Worx
- maquina de atornillar Meec Tools
- maquina de atornillar Milwaukee
- maquina de atornillar Hikoki
- maquina de atornillar Dremel
- maquina de atornillar Tacklife
- maquina de atornillar Hazet
- maquina de atornillar Einhell
- maquina de atornillar Maktec
- maquina de atornillar Craftsman
- maquina de atornillar Powerplus
- maquina de atornillar Cotech
- maquina de atornillar Genesis
- maquina de atornillar Beta
- maquina de atornillar Kraftwerk
- maquina de atornillar Kress
- maquina de atornillar Fieldmann
- maquina de atornillar Truper
- maquina de atornillar Cocraft
- maquina de atornillar Meister Craft
- maquina de atornillar Toolcraft
- maquina de atornillar Fein
- maquina de atornillar Park Tool
- maquina de atornillar Elu
- maquina de atornillar Goon
- maquina de atornillar Sthor
- maquina de atornillar Wiha
- maquina de atornillar SW-Stahl
- maquina de atornillar Cleco
- maquina de atornillar MSW
- maquina de atornillar Einhell Bavaria
- maquina de atornillar Wera
- maquina de atornillar Ingersoll Rand
- maquina de atornillar Bavaria By Einhell
- maquina de atornillar Chicago Pneumatic
- maquina de atornillar Facom
- maquina de atornillar TAURUS Titanium
Últimos maquina de atornillar Manuales
24 Octubre 2024
20 Octubre 2024
17 Octubre 2024
17 Octubre 2024
15 Octubre 2024
12 Octubre 2024
10 Octubre 2024
7 Octubre 2024
5 Octubre 2024
5 Octubre 2024