Rodcraft RC7128 Manual de Usario

Lee a continuación 📖 el manual en español para Rodcraft RC7128 (36 páginas) en la categoría Máquina de molienda. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/36
Operators Manual
RC7028 / RC7048 / RC7128
Die Grinder
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 8956000269, before performing any such task.
05/2016
8956001241 Rev 01
Pull
Turn
Pull
Turn
Lock Condition
To Lock To Release
Fig. 01
Model
Speed Power Collet
Air consumption
Weight Dimension
LxWxH Air Inlet. Inner hose
diameter
Sound
Pressure
Sound
Power
Vibrations
Average Continuous ahd k
W
L
[RPM] [W] [mm] [NL/min] [kg] [mm] [in.] [mm] [dB(A)] [dB(A)] [m/s
2] [m/s2]
1 2 3 45 6 7 8 9 10 1211
RC7028 27000 400 6 228 918 0,72 191*43*74 1/4” 10 85,2 96,2 2,38 0,66
RC7048 27000 400 6 228 918 0,8 250*43*74 1/4” 10 85,7 96,7 3,78 0,79
RC7128 23000 400 6 228 918 0,76 169*43*95 1/4” 10 84,8 95,8 4,05 0,82
Fig. 02
L
Start
A
Air Supply Diagram 1/2" (12mm)
1/2" (12mm)
(1/2") NPT
(1/2") NPT
(1/2") NPT
3/8" (10mm)1/4 BSP
130
90
0
Push to lock
Fig. 03
Spindle Lock Instructions
50h
1.Technical Data
Model
Speed Power Collet
Air Consumption
Weight Dimension
LxWxH Air Inlet Inner Hose
Dia.
Sound
pressure
LpA
Sound
power
LwA
Vibrations
ahd K
Free speed at load
W
L
1 2 3 4 5 6 7 8 9 10 1211
[RPM] [W] [mm] [NL/min] [kg]
[mm] [inch] [mm] [dB(A)] [dB(A)] [m/s²] [m/s²]
max. pressure 6.3bar(90psi)
ah
: Vibration level, Uncertainty ; k L
pA Sound pressure dB(A), KpA K= WA = 3 dB Uncertainty.
Declaration of noise and vibration statement (ISO 15744 and ISO 28927-12)
All values are current as of the date of this publication. For the latest information please visit www.rodcraft.com.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared
values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way
the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user. We, RODCRAFT PNEUMATIC
TOOLS , cannot be held liable for the consequences of using the declared values, instead of values reecting the actual exposure, in an individual risk
assessment in a work place situation over which we have no control. This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf. We
recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can
be modied to help prevent future impairment.
2. Machine type(s)
This product is designed for removing material using abrasives. No other use permitted. For professional use only.
Please read the instructions carefully before starting the machine.
3. Operation (See gures 01, 02 & 03)
Fix the accessories properly to the tool.
Connect device as shown in Fig. 01.
To start the machine, pull the trigger (A). Machine speed is increase by increasing pressure on the trigger. Release the trigger to stop.
4. Lubrication
Use an air line lubricator with SAE #10 oil, adjusted to two drops per minute. If an air line lubricator cannot be used, add air motor oil to the inlet once a day.
5. Maintenance instruction
Follow local country environmental regulations for safe handling and disposal of all components.
Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised
dealer for advice on technical service or if you require spare parts.
Always ensure that the machine is disconnected from energy source to avoid accidental operation.
Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts.
High wear parts are underlined in the parts list.
To keep downtime to a minimum, the following service kits are recommended :
Tune-up kit : see parts list
6. Disposal
The disposal of this equipment must follow the legislation of the respective country.
All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
Repair only by technical maintenance staff.
7. EC Declaration of conformity
We : Rodcraft Customer Center - Langemarckstr.35 bis 45141 Essen- Germany
Machine type(s): Die grinder
Declare that the product(s): RC7028 / RC7048 / RC7128 Serial Number: 001 - 999
Origin of the product : TAIWAN
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to “Machinery“ 2006/42/EC (17/05/2006)
applicable harmonised standard(s) : EN ISO 11148-9:2012
Name and position of issuer : Pascal Roussy (R&D Manager)
Place & Date : Saint-Herblain, 17/05/2016
Technical le available from EU headquarter. Pascal Roussy R&D manager, CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint Herblain - France
Copyright 2015, Rodcraft
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part
numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
Original Instructions
EN English (English)
RC7028 / RC7048 / RC7128
Die grinder

Especificaciones del producto

Marca: Rodcraft
Categoría: Máquina de molienda
Modelo: RC7128

¿Necesitas ayuda?

Si necesitas ayuda con Rodcraft RC7128 haz una pregunta a continuación y otros usuarios te responderán




Máquina de molienda Rodcraft Manuales

Máquina de molienda Manuales

Últimos Máquina de molienda Manuales