Ruwido s 2 easytip Manual de Usario

Ruwido Mando a distancia s 2 easytip

Lee a continuación 📖 el manual en español para Ruwido s 2 easytip (30 páginas) en la categoría Mando a distancia. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/30

Index

GB USER MANUAL 2 - 5

BEDIENUNGSANLEITUNG 6 - 9

ISTRUZIONI PER L’USO 10 - 13

MODE D’EMPLOI 14 - 17

MODO DE EMPLEO 18 - 21

MANUAL DE INSTRUÇÕES 22 - 25

GEBRUIKSAANWIJZING 26 - 29

Easy programming for the control of your TUNER

(RADIO)

To programme the remote control to operate your TUNER, proceed as

described for the CD PLAYER but using the key instead of the CD key.

Please ensure that you refer to the codes listed under the TUNER section and

not the CD PLAYER section.

Easy programming for the control of your TAPE

RECORDER (TAPE DECK)

To programme the remote control to operate your TAPE RECORDER, proceed

as described for the CD PLAYER but using the key instead of the CD key.

Please ensure that you refer to the codes listed under the TAPE section and not

the CD PLAYER section.

Easy programming for the control of your AMPLIFIER

To programme the remote control to operate your AMPLIFIER, proceed as

described for the CD PLAYER. Complete steps 1 to 10, using the key on

your remote control. Please ensure that you refer to the codes listed under the

AMPLIFIER section and not CD PLAYER section.

Code scan

If programming using the codes in the enclosed list failed to work then you

must next try the automatic code scan.

A. Ensure that the remote control is equipped with 2 new batteries (see step

one of easy programming procedure).

B. Switch on your TV SET. When using the automatic scan function for the

VCR, DVD, CD or TAPE, switch on your device, insert a video tape, DVD,

CD or tape cassette and put the unit into ‘Play mode’ i.e, the VCR tape etc

is running.

C. Press the key of your remote control for approx. 4 seconds until the

LED flashes twice.

D. After seeing the 2 flashes and within 5 seconds, enter the code .

After entering the code the LED will flash twice indicating that the code has

been accepted

E. Press and hold the key until your TV switches off. Please note that this

process might take up to 15 minutes. During the automatic scanning you

can remove your finger or change hands provided it is replaced within 8

seconds. If left off of the key for more than 8 seconds then the remote will

revert back to its normal mode. If your TV switches into Stand-By mode

during the automatic process then immediately remove your finger from the

key and then press and release the key until the LED flashes

twice, this will then store the code that the remote has found

F. In some cases during the automatic scanning search the remote control

might find several codes that appear to operate your TV etc, however, if

some of the buttons fail to work properly then it’s possible the remote has

found a partially compatible code. In such cases you will need to restart the

automatic scanning process (steps B. to F.) until a better code is found.

Please note that once the automatic process is restarted, the remote

continues from the last stored code and not at the beginning of code

database.

• To complete a code scan for the VCR, DVD, CD or TAPE, follow the

procedure above but use the key and not the key

• To complete a code scan for the TUNER, follow the procedure above but

use the key

AMP

TAPE

TUNER

UNIVERSAL REMOTE CONTROL

Thank you for purchasing this universal remote control. Before using the

remote you will need to insert 2 type "AAA" batteries (not included) in the

battery compartment ensuring that you follow the polarity shown on the inside.

You can now use your remote control to operate up to 9 different devices

(depending on the model) including a TV, video recorder, DVD player, satellite or

cable receiver, CD player, tuner (radio), tape recorder and amplifier. If your

remote control is equipped with an AUX key (not standard on all models) then

you can also use it to control a second TV set, video recorded, satellite receiver

and/or cable box, CD player, tuner, tape recorder or amplifier!

Easy programming for the control of your TV SET

1. Insert 2 new 1.5V alkaline batteries of type "AAA/LR03". Observe battery

polarity as indicated in the battery compartment.

2. Switch on your TV SET.

3. In the enclosed code list, find your TV brand or manufacturer (e.g. Sony).

4. Beside the manufacturer's name, you will find one or more 3-digit codes.

These codes must be entered into the remote to enable it to work with your

particular TV set.

5. Press the key on the remote control for approximately 4 seconds until

the LED flashes twice.

6. After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical

code from the list.

7. After entering the code the LED will flash twice indicating that the code has

been accepted.

8. Point the remote control towards your TV and press the key. If your TV

does not respond by going into Stand-By mode then repeat steps 3 to 8

and enter the next code in the list.

9. If your TV goes into Stand-By mode when the key pressed then your

remote control has found a compatible code. Next test all of the other

function buttons. If certain functions are not working correctly then restart

the process moving onto the next code number as this may well improve

the situation.

10. If the codes in the list fail to operate your TV then next move onto the

automatic code scan function (see below).

Easy programming for the control of your VIDEO

RECORDER

To programme the remote control to operate your VIDEO RECORDER, proceed

as described above for the television set. Complete steps 1 to 10 using the

key on your remote control. Please ensure that you refer to the codes

listed under the VIDEO RECORDER section and not the TV section.

Easy programming for the control of your SATELLITE

RECEIVER

To programme the remote control to operate your SATELLITE RECEIVER or

CABLE BOX, proceed as described for the television set. Complete steps 1 to

10 using the key on your remote control. Please ensure that you refer to

the codes listed under the SATELLITE section and not the TV section.

Easy programming for the control of your DVD PLAYER

To programme the remote control to operate your DVD PLAYER, proceed as

described for the television set. Complete steps 1 to 10 using the key on

your remote control. Please ensure that you refer to the codes listed under the

DVD section and not the TV section.

Easy programming for the control of your CD PLAYER

To programme the remote control to operate your CD PLAYER, proceed as

described for the television set. Complete steps 1 to 10 except you must first

press and release the key followed by holding down the key. Please

ensure that you refer to the codes listed under the CD section and not the TV

section.

SHIFT

DVD

SAT

VCR

USER MANUAL

GB USER MANUAL

Special functions of your remote control

Brightness / Colour / Contrast / etc.

Adjusting brightness / colour / contrast / bass / tremble / balance at your TV

set, using the universal remote control:

1. Ensure that your remote control is set to TV (press key).

2. Press the key.

3. Within 5 seconds, press

for brightness, for colour,

for contrast, for tremble,

for bass, for balance.

4. To adjust the settings use the and keys.

5. After 5 seconds, your remote control returns to standard mode for the

selection of channels.

OK key

• At TV level The basic settings of your TV SET are activated

• At TV level / menu Confirmation key for settings

• At VCR level Record button (press key twice)

• At SAT level Confirmation key for settings

• At DVD level Confirmation key for settings

• At TAPE level Record button (press key twice)

Please write down the 3-digit codes of your devices for future reference.

Depending on the remote control model, you might have to reprogram me

the universal control device after a battery change.

VOL-

VOL+

SHIFT

Code scan for VCR, SAT, DVD, CD, TAPE, TUNER and

AMP

To complete a code scan for VCR, SAT, DVD, CD, TAPE, TUNER or AMP,

proceed as described for a TV code scan. Complete above steps A to G, using

keys

/ or , or

and / and / and or and respectively.

At step E,

for SAT and AMP, press the key;

for VCR, DVD, CD and TAPE, press the key, and

for TUNER, press key .

Finding out what code number you are using

If you have programmed your remote control by means of the automatic code

scan, or if you have forgoten the code you have stored then the following

procedure will replay the codes being used.

A. Press the key of your remote control for approx. 4 seconds until the

LED flashes twice.

B. Enter code , using the numerical keys. The LED flashes twice.

C. Press key and count the number of LED flashes. This number

corresponds to the first digit of the code.

D. Press key and count the number of LED flashes. This number

corresponds to the second digit of the code (if the digit is 0, the LED does

not flash).

E. Press key and count the number of LED flashes. This number

corresponds to the third digit of the code (if the digit is 0, the LED does not

flash).

F. Steps C, D and E can be repeated as often as necessary.

To read the currently used code for the control of a VCR, SAT, DVD/AUX, CD,

TAPE, TUNER or AMP device, proceed as described above for your TV SET.

Complete steps A to F, pressing the , , , , , or

key respectively.

Write down the code number as indicated by the LED.

Programming for AUX devices

If the remote you have purchased has a separate AUX key then this can be

used to operate a second TV set, video recorder, satellite receiver/cable box,

CD player, tape recorder, tuner or amplifier. To program your remote

control for a second device, proceed as follows:

1. Press the key of your remote control until the LED flashes twice.

2. Press

key for a second TV set,

key for a second video recorder,

key for a second satellite receiver or cable box,

keys and for a second CD player,

keys and for a second tape recorder,

keys and for a second tuner,

keys and for a second amplifier.

3. On the numerical keypad, enter a 3-digit code from the enclosed list.

4. The LED flashes twice, indicating that the code has been accepted.

AMP

SHIFT

TUNER

SHIFT

TAPE

SHIFT

SAT

VCR

AUX

AMP

TUNER

TAPE

DVD

SAT

VCR

AMP

SHIFT

TUNER

SHIFT

TAPE

SHIFT

DVD

SAT

VCR

SAT

DVD/AUX

TAPE

TUNER

AMPLIFIER

USER MANUAL

GB USER MANUAL

Especificaciones del producto

Marca:	Ruwido
Categoría:	Mando a distancia
Modelo:	s 2 easytip
Color del producto:	Black, Grey
Peso del embalaje:	19650 g
Ancho del embalaje:	877 mm
Empaquetadura en profundidad:	357 mm
Altura del embalaje:	639 mm
Tipo de embalaje:	Doos
Ajustable en altura:	150 mm
Diagonal de la pantalla:	31.5 "
Resolución:	3840 x 2160 Pixels
Pantalla táctil:	Nee
Densidad de pixeles:	140 ppi
Relación de aspecto original:	16:9
Tipo de enchufe de conexión:	3,5 mm
Ángulo de visión, horizontal:	178 °
Ángulo de visión, vertical:	178 °
Cables suministrados:	DisplayPort, HDMI, USB
Forma de pantalla:	Flat
Relación de contraste típica:	1000:1
Carga rápida:	Ja
Posicionamiento en el mercado:	Gamen
Rango de frecuencia horizontal:	30 - 330 kHz
Rango de frecuencia vertical:	23 - 144 Hz
Número de puertos HDMI:	2
Micrófono, entrada de línea:	Ja
Entrada de audio para PC:	Ja
Opción de montaje de bloqueo de cable:	Ja
Tipo de ranura para candado de cable:	Kensington
Altavoces incorporados:	Ja
Energía promedio:	8 W
Consumo de energía (en espera):	0.5 W
Número de hablantes:	2
Salidas de auriculares:	1
Certificación:	ISO 9241-307
Pantalla, número de colores.:	1,07 miljard kleuren
Consumo de energía (cuando está apagado):	0.3 W
Velocidad máxima de actualización:	144 Hz
Tecnología de alto rango dinámico (HDR):	DisplayHDR 1400
Soporte HDR:	Ja
Conexión para adaptador de red:	Ja
tipo HD:	4K Ultra HD
hdmi:	Ja
Versión HDMI:	2.1
Tecnología de visualización:	IPS
Tiempo de respuesta:	1 ms
Resoluciones de gráficos compatibles:	3840 x 2160
Montaje VESA:	Ja
Interfaz de montaje en panel:	100 x 100 mm
Pantalla antirreflejos:	Ja
Imagen en imagen:	Ja
Certificados de sostenibilidad:	CE
Brillo (típico):	600 cd/m²
relación de aspecto:	16:9
espacio de color rgb:	DCI-P3
Relación de contraste (dinámica):	80000000:1
Cámara integrada:	Nee
Profundidad (sin base):	63.2 mm
Altura (sin base):	425.5 mm
Ancho (sin base):	715.2 mm
Visualización en pantalla (OSD) -talen:	CHI (SIMPL), CHI (TR), CRO, CZE, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, KOR, POL, POR, RUS, SWE, TUR, UKR
Número de DisplayPorts:	1
Diámetro de la pantalla en centímetros.:	80 cm
Decodificadores de audio incorporados:	DTS
Consumo de energía (HDR) por 1000 horas:	102 kWu
Clase de eficiencia energética (SDR):	G
Consumo de energía (DEG) por 1000 horas:	82 kWu
Clase de eficiencia energética (HDR):	G
Ancho del dispositivo (con soporte):	715.2 mm
Dispositivo de profundidad (con soporte):	290.1 mm
Altura del dispositivo (con soporte):	612.5 mm
Peso (con soporte):	11520 g
AMD FreeSync:	Ja
Gama de colores:	97 procent
Visualización en pantalla (OSD):	Ja
Número de idiomas de visualización en pantalla:	16
Número de puertos descendentes USB tipo A:	4
Versión concentrador USB:	3.2 Gen 1 (3.1 Gen 1)
Tipo de retroiluminación:	Mini LED
Tipo de comida:	Extern
Modo de juego:	Ja
Tipo de panel:	IPS
Giratorio:	Ja
Giratorio horizontalmente:	-30 - 30 °
Auriculares apagados:	Ja
Adaptación externa:	Ja
Concentrador USB incorporado:	Ja
Cobertura NTSC (normal):	134 procent
Borde frontal:	Zwart
Soporte extraíble:	Ja
Color de pies:	Zilver
Cobertura sRGB (promedio):	156 procent
Tecnología de baja luz azul:	Ja
Tipo USB-puerto ascendente:	USB Type-B
Versión DisplayPort:	1.4
Bisagra:	Ja
Imagen al lado de la imagen (PbP):	Ja
Entrega de energía USB:	Ja
Entrega de energía USB hasta máx.:	90 W
Modo alternativo USB Type-C DisplayPort:	Ja
Versión HDCP:	2.2
Número de puertos descendentes USB Type-C:	1
Gleurengamma DCI-P3:	97 procent
Cobertura Adobe RGB:	131 procent
Tipo de brillo exterior:	Mat
Número de puertos ascendentes USB tipo B:	1
Adaptador de corriente incluido:	Ja
Longitud del cable USB:	1.5 m
Longitud del cable HDMI:	1.8 m
Consumo de energía (típico):	80 W
Rango de ángulo de inclinación:	-5 - 21 °
Escala de eficiencia energética:	A tot G
Código del Sistema Armonizado (SA):	85285210
Efectos de luz:	Ja
Función de proyección:	Logo
Conmutador KVM incorporado:	Ja
Longitud del cable DisplayPort:	1.8 m
Rango de frecuencia de actualización de AMD FreeSync:	48 - 144 Hz
ajustes de inclinación:	Ja
Zonas de niebla locales:	1152