Schneider EVlink Parking EVF2S22P02R Manual de Usario

Schneider No categorizado EVlink Parking EVF2S22P02R

Lee a continuación 📖 el manual en español para Schneider EVlink Parking EVF2S22P02R (44 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/44
02-2022 1/44
© 2019 Schneider Electric - All rights reserved.
NHA47410_EN_FR-07
EVlink Parking - EVF2S7P - EVF2S22P - EVW2S7P - EVW2S22P • •
Installation Guide
Guide d'installation
Customer Care Center
NHA47410-07
www.se.com/en/download/
it Guida di installazione
es Guía de instalación
NHA47410_IT_ES
de Installationsanleitung
ru Руководство по установке
NHA47410_DE_RU
2/44
© 2019 Schneider Electric - All rights reserved.
NHA47410_EN_FR-07
This document contains the general description and/or technical characteristics of the products mentioned. It may not be used to dene or
determine the suitability or reliability of these products for specic user applications. Each user or integrator shall perform a full and appropriate
risk analysis, product assessment and tests as regards the application to be used and its operation. Neither Schneider Electric nor any of its
a󰀩liates or subsidiaries shall be liable for the incorrect use of the information contained in this document. Please contact us if you have any
suggestions, improvements or corrections to be made to the document.
No part of this document may be reproduced in any form or by any means, electronic, mechanical or photocopying, without the prior authorization
of Schneider Electric.
All relevant local safety regulations must be respected when installing and using this product. For safety reasons and to ensure compliance with
documented system data, repairs to components must be performed only by the manufacturer.
In the event where equipment is used for applications with technical safety requirements, users must follow the appropriate instructions.
Failure to use Schneider Electric software or an approved software with our hardware products may result in personal injury, damage or
malfunction.
Non-compliance with instructions may cause bodily injury or damage to property.
© 2019 Schneider Electric. All rights reserved.
Le présent document comprend des descriptions générales et/ou des caractéristiques techniques des produits mentionnés. Il ne peut pas être
utilipour dénir ou déterminer l’adéquation ou la abilité de ces produits pour des applications utilisateur spéciques. Il incombe à chaque
utilisateur ou intégrateur de réaliser l’analyse de risques complète et appropriée, l’évaluation et le test des produits pour ce qui est de l’application
à utiliser et de l’exécution de cette application. Ni la sociéSchneider Electric ni aucune de ses sociétés a󰀩liées ou liales ne peuvent être
tenues pour responsables de la mauvaise utilisation des informations contenues dans le présent document. Si vous avez des suggestions, des
améliorations ou des corrections à apporter à cette publication, veuillez nous en informer.
Aucune partie de ce document ne peut être reproduite sous quelque forme ou par quelque moyen que ce soit, électronique, mécanique ou
photocopie, sans autorisation préalable de Schneider Electric.
Toutes les réglementations de sécurité pertinentes locales doivent être observées lors de l’installation et de l’utilisation de ce produit. Pour des
raisons de sécurité et an de garantir la conformité aux données système documentées, seul le fabricant est habilià e󰀨ectuer des parations
sur les composants.
Lorsque des équipements sont utilisés pour des applications présentant des exigences techniques de sécurité, suivez les instructions
appropriées.
La non-utilisation du logiciel Schneider Electric ou d’un logiciel approuavec nos produits matériels peut entraîner des blessures, des
dommages ou un fonctionnement incorrect.
Le non-respect de cette consigne peut entraîner des sions corporelles ou des dommages matériels.
© 2019 Schneider Electric. Tous droits réservés.
3/44
© 2019 Schneider Electric - All rights reserved.
NHA47410_EN_FR-07
Table of contents
Introduction
Floor standing station
Wall mounted station
Floor standing/wall
mounted station
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Description of the station. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Station life cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Required equipment, tools, and accessories. . . . . . . . . . . 13
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Installation design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installing the oor standing station .................. 22
Fitting the enclosure on the pedestal . . . . . . . . . . . . . . . . . 23
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Testing the power tripping auxiliary (MNx). . . . . . . . . . . . . 28
Tightening the cable glands. . . . . . . . . . . . . . . . . . . . . . . . . 28
Fitting the covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Conguring the station ............................ 31
Testing the station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Residual current protection test . . . . . . . . . . . . . . . . . . . . . 31
Recycling packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Installing the wall bracket . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Fitting the enclosure on the wall bracket . . . . . . . . . . . . . . 33
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Testing the power tripping auxiliary (MNx). . . . . . . . . . . . . 37
Tightening the cable glands. . . . . . . . . . . . . . . . . . . . . . . . . 37
Fitting the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Conguring the station ............................ 40
Testing the station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Residual current protection test . . . . . . . . . . . . . . . . . . . . . 40
Recycling packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Installing the surge arrester. . . . . . . . . . . . . . . . . . . . . . . . . 41

Especificaciones del producto

Marca: Schneider
Categoría: No categorizado
Modelo: EVlink Parking EVF2S22P02R
Color del producto: Black, White
Pantalla incorporada: Ja
Peso.: 4200 g
Ancho: 316 mm
Profundidad: 680 mm
Altura: 239 mm
Puerto USB: Ja
Cables suministrados: USB
Guía de inicio rápido: Ja
Incluye adaptador de CA: Ja
Consumo de energía (en espera): 8 W
Certificación: FCC B, CE, CU, Mexico Energy, WEEE
Consumo de energía (cuando está apagado): 0.5 W
versión USB: 3.2 Gen 1 (3.1 Gen 1)
Tipo de sensor de imagen: CCD
Certificados de sostenibilidad: RoHS, ENERGY STAR
Voltaje de entrada: 100-240 V
Software incluido: Visioneer OneTouch, Visioneer Acuity Module, Nuance PaperPort, Nuance OmniPage, Nuance Power PDF
Soporta Windows: Windows 10, Windows 7, Windows 8, Windows 8.1
Tipo de comida: AC
Corriente de salida: 2 A
Abarcando: 24 V
Rango de temperatura de funcionamiento: 40 - 95 °F
Interfaces estándar: USB 3.2 Gen 1 (3.1 Gen 1)
tipo de escáner: ADF-scanner
Resolución de escaneo óptico: 600 x 600 DPI
Escaneo dúplex: Ja
Espacio mínimo de almacenamiento en disco: 350 MB
Procesador mínimo: Pentium IV
Entrada de profundidad de color: 48 Bit
RAM mínima: 2048 MB
Capacidad del alimentador automático de documentos: 120 vel
Tamaño máximo de escaneo: 241 x 5994 mm
Controladores de escáner: ISIS, TWAIN, WIA
Pantalla de escaneo del ADF (b/n, A4): 88 ppm
Salida de profundidad en escala de grises: 8 Bit
Escaneos en color: Ja
Escaneo de películas: Nee
Escaneo dúplex del ADF (b/n, A4): 176 ipm
Ciclo de servicios diario (máx.): 10000 pagina's
Tipos de medios de escaneo admitidos: Photo paper, Plastic Card
Peso del medio, alimentación automática: 75 - 80 g/m²
Consumo de energía (típico): 24 W
Temperatura de funcionamiento (TT): 5 - 35 °C
Humedad relativa de funcionamiento (VV): 10 - 90 procent
Tamaño de escaneo de entrada del documento (min): 51 x 51 mm
Fuente de luz: Witte led
Salida de profundidad de color: 24 Bit
Salida de profundidad monocromática: 1 Bit
Velocidad de escaneo dúplex del ADF (color, A4): 176 ipm
Velocidad de escaneo del ADF (color, A4): 88 ppm
Resolución de escaneo mejorada: 1200 x 1200 DPI

¿Necesitas ayuda?

Si necesitas ayuda con Schneider EVlink Parking EVF2S22P02R haz una pregunta a continuación y otros usuarios te responderán




No categorizado Schneider Manuales

No categorizado Manuales

Últimos No categorizado Manuales