Seco-Larm MVE-AH010Q Manual de Usario

Seco-Larm extensor AV MVE-AH010Q

Lee a continuación 📖 el manual en español para Seco-Larm MVE-AH010Q (4 páginas) en la categoría extensor AV. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.
MVE-AH010Q
Extender for HDMI Over Dual Cat5e/6
Manual
Extend HDMI over two Cat5e/6 cables
Supports resolutions from 480i to 1080p with zero signal loss
Transmits up to 1 60m) at 1080p over two Cat6 cables 97ft (
Plug and play operation comes as a complete set
ENFORCER Extender for HDMI over Dual Cat5e/6
2 SECO-LARM U.S.A., Inc.
Introduction:
The ENFORCER HDMI Extender over Cat5e/6 extends the range of HDMI by using a
transmitter and an active receiver to send video and audio over two Cat5e/6 cables.
HDMI Formats as high as 1080p can be transmitted up to 1 60m) between the two 97ft (
units with zero signal loss.
Features:
Signal Strength nsmitter ensures that the signal strength will remain strong over Tra
the length of the cable.
Distance The HDMI Extender over Cat5e/6 is capable of providing a clear HDMI
signal up to 1 (60m). 97ft
Formats Supported The HDMI Extender over Cat5e/6 supports both progressive and
interlaced formats: 1080p/1080i/720p/576p/576i/480p/480i.
Plug and Play The HDMI Extender over Cat5e/6 comes as complete set consisting a
of a transmitter, receiver, and power supply. No adjustments or settings must be made,
the unit is ready to use right out of the box.
Zero Signal Loss Integrated circuits in the transmitter and receiver clean, buffer and
amplify the HDMI signal to prevent signal loss and ensure a clear signal regardless of
the length of the cable.
Specifications:
Parts List:
1 x Transmitter (MVE-AH010Q-TQ)
1 x Receiver (MVE-AH010Q-RQ)
1 x 5VDC Power adapter
1 x Manual
0.5~1.0 Vp-p
5Vp-p (TTL)
1080p
High-speed HDMI, HDCP 1.2
Dolby TrueHD, DTS-HD Master Audio
HDMI
1080p/1080i/720p/576p/576/i/480p/480i
Cat6: 1 6 97’ ( 0m); Cat5e: 98’ (30m)
6.75Gbps
T568-B
5VDC
5VDC@1A (2.1mm plug)
Current draw
Transmitter
N/A
Receiver
400mA@5VDC
23°~95° F (-5°~35° C)
5~90% RH (no condensation)
33/16 x13/4x7/8” (81x45x22mm)
8.7-oz (246g)
ENFORCER Extender for HDMI over Dual Cat5e/6
SECO-LARM U.S.A., Inc. 3
Included 5VDC
Power Adapter
Overview:
Back
Top
Left
Right
5VDC Power input
Cat5e/6 Ports
HDMI Output
Status LEDs
Installation:
1. Determine the locations where the HDMI to Cat5 units will be placed as well as how much e/6
Cat5e/6 cable will be necessary.
2. Connect the HDMI to cable to both the transmitter and source device.
3. Connect the HDMI cable to both the receiver and display.
4. Connect Cat5e/6 cables to both the receiver and transmitter units. Make sure connect the the to
cables to their respective ports, i.e. Cat5e/6-1 connected to Cat5e/6-1 Cat5e/6-2 connected , and
to Cat5e/6- 2.
Note: For best results, use Cat6 cable.
Note: For best results, use solid core cable. Stranded core cable is not recommended.
5. Connect the 5VDC adapter to the receiver unit.
6. Switch on the HDMI source device and display to verify that the system is functioning properly.
Two Cat5e/6 cables are required. Please use T568- wiring standard. B
Sample Application:
HDMI Cable
HDMI Source
HDMI
Display
Transmitter
Receiver
Two Cat5e/6 Cables
HDMI Cable
Use T568B UTP wiring standard
Use T568B UTP wiring standard
(Receiver shown)

Especificaciones del producto

Marca: Seco-Larm
Categoría: extensor AV
Modelo: MVE-AH010Q

¿Necesitas ayuda?

Si necesitas ayuda con Seco-Larm MVE-AH010Q haz una pregunta a continuación y otros usuarios te responderán




extensor AV Seco-Larm Manuales

extensor AV Manuales

Últimos extensor AV Manuales