Seiko 6N53 Manual de Usario

Seiko Mirar 6N53

Lee a continuación 📖 el manual en español para Seiko 6N53 (5 páginas) en la categoría Mirar. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
21
Some models have a screw down crown instead of a standard crown.
• How to unlock the crown:
Unscrew the crown by turning it counterclockwise. Then, pull it out for time/calendar setting.
• How to lock the crown:
Push the crown back to the normal position. Then, turn it clockwise while pressing it until
it locks in place.
• When using the watch in water:
Before using the watch in water, make sure the crown is screwed in completely. Do not
operate the crown when the watch is wet or in water.
Calibre No.
Calibre number of your watch
Please check the case back of your watch to nd the calibre number inscribed on
it, and read the instructions pertaining to your watch calibre number. It is a 4-digit
number to the left of the hyphen mark.
Second hand
[DISPLAY AND HANDS]
Minute hand
Hour hand
Day
Crown
Date
INSTRUCTIONS FOR ANALOGUE QUARTZ AND MECHANICAL WATCHES
Your watch is one of the following six types of analogue quartz and mechanical watches.
Before using your new watch, please read the instructions pertaining to your watch type;
they will help you to get the best out of the watch.
D Three hands without calendar
E Three hands with date calendar
F Three hands with
day and date calendar
A Two hands without calendar
B Two hands with date calendar
C Two hands with
day and date calendar
43
Note:
When setting the minute hand of a quartz watch, advance it to a few minutes
ahead of the time and then turn it back to the exact time.
For models with date calendar
The date will change gradually between 9:00 P.M. and 4:00 A.M. (See note 1
on calendar setting.) For some models, however, it will change instantly when
the hands pass the 12 o’clock marker at midnight.
1. Pull out the crown to the rst click.
2. Turn the crown until the previous day’s date appears in the calendar frame.
3. Pull out the crown to the second click, and advance the hour and minute hands until
the desired date appears.
* If your watch has three hands, pull out the crown when the second hand is pointing to 12 o’clock.
4. Adjust the time by turning the crown in the desired direction.
5. Push the crown back in to the normal position.
* If your watch has three hands, push the crown back in to the normal position in accordance with
a time signal for “00” seconds.
TIME/CALENDAR SETTING FOR MODELS WITH CALENDAR
B E
How to start a mechanical watch
Cal. 4206, 4207, 4217, 4227, 7002, 7009, 7019, 4R15, 4R16, 4S15, 7S25, 7S26, 7S35, 7S36,
7S55
To initially start your watch, swing it from side to side in a horizontal arc for about 30
seconds.
Cal. 4206, 4207, 4217, 4227, 4S15
These watches can also be started by winding the crown.
Note:
If the watch is worn daily, SEIKOs automatic mechanism will wind the main-
spring automatically through normal wrist movements.
1. Pull out the crown all the way.
* If your watch has three hands, pull out the crown when the second hand is pointing to 12 o’clock.
2. Adjust the time by turning the crown in the desired direction.
3. Push the crown back in to the normal position.
* If your watch has three hands, push the crown back in to the normal position in accordance with
a time signal for “00” seconds.
A
TIME SETTING FOR MODELS WITHOUT CALENDAR
Set the time/calendar following the instruction pertaining to your watch type.
HOW TO USE THE WATCH
D
65
3 When setting the hour hand, check that AM/PM is correctly set. The watch is so
designed that the calendar changes once every 24 hours.
Turn the hands past the 12 o’clock marker to determine whether the time is set for
the A.M. or P.M. period. If the calendar changes, the time is set for the A.M. period.
If it does not change, the time is set for the P.M. period.
Loss/gain (monthly rate) is less than 15 seconds (20 seconds for some calibres) in the
normal temperature range (5°C ~ 35°C or 41°F ~ 95°F).
LOSS/GAIN OF THE ANALOGUE QUARTZ WATCH
Because the battery is inserted at the factory to check the function and performance
of the watch, its actual service life once in your possession may be less than the
specied period. When the battery expires, make sure to replace it as soon as
possible to prevent any malfunction. For battery replacement, we recommend that
you contact an AUTHORIZED SEIKO DEALER and request they only use a genuine
SEIKO battery.
Battery life indicator
If your analogue quartz watch has a second hand, the battery needs to be replaced
when you see the second hand moving in two-second increments instead of the
normal one-second increments. (Some calibres do not have this function.) The
watch will, however, remain accurate while the second hand is moving in two-
second increments.
CHANGING BATTERY IN ANALOGUE QUARTZ WATCH
For models with day and date calendar
C F
1. Pull out the crown to the rst click.
2. Turn the crown until the previous day’s date appears in the calendar frame.
3. Turn the crown in the opposite direction until the desired language (bilingual) for the
day before the desired day appears in the calendar frame.
* For Cal. 7009 and 7019, push the crown back in to the normal position and then push it
repeatedly to set the day.
4. Pull out the crown to the second click, and advance the hour and minute hands until
the desired date and day appears.
* If your watch has three hands, pull out the crown when the second hand is pointing to 12 o’clock.
5. Adjust the time by turning the crown in the desired direction.
6. Push the crown back in to the normal position.
* If your watch has three hands, push the crown back in to the normal position in accordance with
a time signal for “00” seconds.
Notes on calendar setting:
1 Do not change the calendar between 9:00 P.M. and 4:00 A.M, as it may not change
properly. If it is necessary to set the calendar during that time period, first change the
time to any time outside those hours, set the calendar and then reset the correct time.
2 When the day shifts automatically to the next day, the other language will temporarily
appear.

Especificaciones del producto

Marca: Seiko
Categoría: Mirar
Modelo: 6N53

¿Necesitas ayuda?

Si necesitas ayuda con Seiko 6N53 haz una pregunta a continuación y otros usuarios te responderán




Mirar Seiko Manuales

Seiko

Seiko 6N76 Manual de Usario

18 Septiembre 2024
Seiko

Seiko 6N53 Manual de Usario

18 Septiembre 2024
Seiko

Seiko 6N52 Manual de Usario

18 Septiembre 2024
Seiko

Seiko 6G28 Manual de Usario

18 Septiembre 2024
Seiko

Seiko 4N30 Manual de Usario

18 Septiembre 2024
Seiko

Seiko 4227 Manual de Usario

18 Septiembre 2024
Seiko

Seiko 6N32 Manual de Usario

18 Septiembre 2024
Seiko

Seiko 6N42 Manual de Usario

18 Septiembre 2024
Seiko

Seiko 6N22 Manual de Usario

18 Septiembre 2024
Seiko

Seiko 1N01 Manual de Usario

18 Septiembre 2024

Mirar Manuales

Últimos Mirar Manuales