Skagen Signatur Manual de Usario

Skagen Mirar Signatur

Lee a continuación 📖 el manual en español para Skagen Signatur (14 páginas) en la categoría Mirar. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/14
InstructIons and care
Skagen suggests the following solutions for cleaning metal and crystal surfaces:
3:1 solution of ammonia based window cleaner to water
4:1 solution of rubbing alcohol to water.
*Do not use soap products, soap will leave residue behind when dry.
These suggested solutions will evaporate cleanly from metal and glass surfaces.
To clean the case and crystal:
Moisten a soft cloth with one of the above solutions. Gently wipe the case and
crystal clean. Be careful not to put too much stress on the crystal as you clean. Avoid
immersing or soaking the case or crystal portion of the watch, regardless of water
resistance rating.
To clean the band or strap:
Metal: Dip a cotton swab into the above solution and gently rub it on the unclean
area of the band. For more intricate mesh bands, you may want to use a soft bristle
toothbrush or nailbrush. Be sure to cover the case of the watch during this process so
as not to soak it. For stubborn dirt, you may want to take your watch in to the nearest
Skagen location.
Silicon, Felt and Ceramic: Simply wipe the strap down with a damp, soft cloth. Avoid
soaps and solvents as they may damage the material.
Leather: Simply wipe it clean with a damp cloth, using water only. You may want to
use leather conditioner or a small amount of hand lotion to keep the leather supple
over time. Top grain leather may develop a milky “haze” if left alone for extended
periods. This can simply be wiped away or removed with leather conditioner. A
product called “nubuck eraser” can be used to remove light stains and debris from the
inside of the strap.
WATCH CARE
TO ADJUST THE BAND: LIFT – SHIFT - PRESS
1. Position a athead screwdriver or other adjustment tool in the slot on the clasp.
Lift the bar in the direction facing away from the straight pin.
IMPORTANT: Ensure that the tool handle points toward the watch case.
Pressing the adjustment tool against the straight pin may bend and destroy the pin.
2. Shift the adjustable buckle to the desired position. Clasp must be placed in one of the
adjustment indentations on the back of the band.
3. Press the slotted clasp closed.
ShiftLift Press
1 2 3
TO SECURE THE BAND: HOOK – SNAP - CLASP
Pull the hook over the pin, snap the at clasp closed, then close the
security clasp.
1 2 3
SnapHook Clasp
Mesh Band adjustMent
InstructIons

Especificaciones del producto

Marca: Skagen
Categoría: Mirar
Modelo: Signatur

¿Necesitas ayuda?

Si necesitas ayuda con Skagen Signatur haz una pregunta a continuación y otros usuarios te responderán




Mirar Skagen Manuales

Mirar Manuales

Últimos Mirar Manuales