Sony BKPF-L603 Manual de Usario

Sony No categorizado BKPF-L603

Lee a continuación 📖 el manual en español para Sony BKPF-L603 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Printed in Japan
BKPF-L603 (SY、和、) 2009.04 13
3-861-852-05 (1) 1997
Sony Corporation
SDI DISTRIBUTOR
BKPF-L603
INSTALLATION GUIDE (Revised 4)
警告
Precautions
If this board is installed incorrectly, personal injury or
damage to peripheral items may occur due to re,
shock, or other accidental circumstances. To avoid
such risks, installation should be performed by trained
service technicians.
To technician installing board
Please refer to the Manual supplied with the PFV-L-
series for installation instructions.
Introduction
This product is an optional board designed to be
installed in a PFV-L-series Interface Unit. The board
divides a serial digital video signal to eight lines, and
supplies the divided signals.
Specifications
Power requirements +5 V DC, 300 mA
(supplied from the PFV-L-series)
Dimensions (w/h) Main board: 267 × 77 mm
(10 3/4 3 1/8 inches)×
Connector panel: 33 85 mm×
(1 5/16 3 3/8 inches)×
Mass Main board: 110 g (4 oz)
Connector panel: 100 g (4 oz)
Supplied accessories Installation Guide (1)
Installation Manual (1)
Design and specications are subject to change
without notice.
電気製品安全のめの注意事項
火災や人身事故
ご使用ユニPFV-L
付属のルの「安全のために」お読
本機て装着す火災感電の他の事故
周辺物品損害
危険を避装着はサた技術者
ご依頼
本機を装着する技術者へ
装着のかたPFV-Lに付属のマニご覧
概要
本機ユニPFV-Lに装着て使用す
板で1系統ルデビデオ信8
に分配して出力
仕様
電源 +5VDC300mAPFV-L供給)
最大外形寸法 メ267×77mm(幅/高
33×85mm(幅/高
質量 メ110g
100g
付属品 イ(1)
マニ(1)
仕様おび外観は改良ため予告変更
ご了承
For the customers in the U.S.A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modications not
expressly approved in this manual could void your authority
to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC Rules.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
For the customers in Canada
This Class A digital apparatus complies with Canadian ICES-
003.
Pour les clients au Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
For the customers in Europe
This product with the CE marking complies with the EMC
Directive issued by the Commission of the European
Community.
Compliance with this directive implies conformity to the
following European standards:
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environments: E1 (residential), E2
(commercial and light industrial), E3 (urban outdoors), E4
(controlled EMC environment, ex. TV studio).
Pour les clients en Europe
Ce produit portant la marque CE est conforme à la Directive
sur la compatibilité électromagnétique (EMC) émise par la
Commission de la Communauté européenne.
La conformité à cette directive implique la conformité aux
normes européennes suivantes :
• EN55103-1 : Interférences électromagnétiques (émission)
• EN55103-2 : Sensibilité électromagnétique (immunité)
Ce produit est prévu pour être utilisé dans les environnements
électromagnétiques suivants : E1 (résidentiel), E2
(commercial et industrie légère), E3 (urbain extérieur) et E4
(environnement EMC contrôlé, ex. studio de télévision).
Für Kunden in Europa
Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die
EMV-Richtlinie der EG-Kommission.
Angewandte Normen:
• EN55103-1: Elektromagnetische Verträglichkeit
(Störaussendung)
• EN55103-2: Elektromagnetische Verträglichkeit
(Störfestigkeit)
Für die folgenden elektromagnetischen Umgebungen: E1
(Wohnbereich), E2 (kommerzieller und in beschränktem
Maße industrieller Bereich), E3 (Stadtbereich im Freien) und
E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).
For the customers in Europe
The manufacturer of this product is Sony Corporation, 1-7-1
Konan, Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product safety
is Sony Deutschland GmbH, Hedelnger Strasse 61, 70327
Stuttgart, Germany.
Pour les clients en Europe
Le fabricant de ce produit est Sony Corporation, 1-7-1
Konan, Minato-ku, Tokyo, Japon.
Le représentant autorisé pour EMC et la sécurité des
produits est Sony Deutschland GmbH, Hedelnger Strasse
61, 70327 Stuttgart, Allemagne.
Für Kunden in Europa
Der Hersteller dieses Produkts ist Sony Corporation, 1-7-1
Konan, Minato-ku, Tokyo, Japan.
Der autorisierte Repräsentant für EMV und Produktsicherheit
ist Sony Deutschland GmbH, Hedelnger Strasse 61, 70327
Stuttgart, Deutschland.

Especificaciones del producto

Marca: Sony
Categoría: No categorizado
Modelo: BKPF-L603

¿Necesitas ayuda?

Si necesitas ayuda con Sony BKPF-L603 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Sony Manuales

No categorizado Manuales

Últimos No categorizado Manuales