Soundskins Rings v3 SSK-RINGS Manual de Usario

Soundskins No categorizado Rings v3 SSK-RINGS

Lee a continuación 📖 el manual en español para Soundskins Rings v3 SSK-RINGS (1 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Recommended Installation Instructions
- Prepping the Surface
We need to start with getting all metal surfaces clean of dust, debris, oil, wax and moisture. For
this we recommend a microfiber clothe, a breathing mask, and a quick drying solvent like
Acetone. If you have some rust it is possible it requires a bit more attention and detail to ensure
good contact. Once all the surfaces have been prepped and properly air dried we can start
applying material. Our material is unique so a household pair of scissors, exact knife, or razor
blade can be used to cut out the patterns.
- Installation
Roll the material out on a flat surface and you can measure the size you will need, (paper or
cardboard can be used to cut templates) after you have made your cut, peel off the white paper
on the back covering the adhesive. When you’re to apply pick a place to start like the top down
so you can work the material all one direction and minimize any trapped air pockets. You can
push the material with your hand a medium pressure outwards till material has a complete
contact. If you see any possible trapped air you can use the point of a razor blade or a sewing
needle to poke a hole and push down material. The main purpose is to ensure the adhesive has
proper contact to the metal surface. Check that any holes that require fastening hardware are
not blocked. Repeat this step for the remainder of the installation and ensure lasting adhesion
with the maximum insulation. If you have questions we can be contacted with the info provided
Soundskins USA
13452 Alondra Blvd, Cerritos, Ca 90703
Phone: 562.689.5151
Email: info@soundskinsglobal.com
www.SoundSkinsGlobal.com

Especificaciones del producto

Marca: Soundskins
Categoría: No categorizado
Modelo: Rings v3 SSK-RINGS

¿Necesitas ayuda?

Si necesitas ayuda con Soundskins Rings v3 SSK-RINGS haz una pregunta a continuación y otros usuarios te responderán




No categorizado Soundskins Manuales

No categorizado Manuales

Últimos No categorizado Manuales