SPL HPm Manual de Usario

Lee a continuación 📖 el manual en español para SPL HPm (16 páginas) en la categoría receptor. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
Headphone Monitoring Amplier
Headphone monitoring amplier with Phonitor Matrix
for two headphones as 500 Series module
EN
2 HPm – 500 Series
Introduction
Developer
Bastian Neu
Version 2.0 – 12/2022
This manual contains a description of the product. In no way it represents a guarantee
of particular characteristics or results of use. The information in this document has
been carefully compiled and veried and, unless otherwise stated or agreed upon,
correctly describes the product.
Specications are subject to change without notice.
Specications
General
Frequency range (-3 dB): 10 Hz – 100 kHz
Common mode rejection (1 kHz, 0 dBu ): > 82 dB
THD + N (0 dBu, 10 Hz – 22 kHz): 0.03%
Noise (A-weighted): -92.3 dBu
Dynamic range: 113 dB
Input & Output (balanced)
Input impedance: 10 kΩ
Output Impedance: 150 Ω
Headphone Outputs, 1/4" (6,35 mm) TRS Jacks
Max output power (600 Ω) +18 dBu
Max output power (300 Ω) +15 dBu
Max output power (32 Ω) +5 dBu
HPm – 500 Series 3
Scope of Delivery
HPm module, 500 Series
Manual
Measurement & Weight
Double-slot module, 500 Series
Weight: 1.76 lbs (0.8 kg)
Please keep the original packaging. In a service case the original packaging ensures a
safe transport.
Installation
Installation into a 500 Series rack:
Please read the manual that comes with the 500 Series rack. You should receive all
necessary information for the installation process.
For the installation or exchange of HPm, your 500 Series rack should be switched
o and the power cable should not be connected.
Insert the HPm module into two adjacent free slots of your rack. Make sure the
connectors of the HPm is precisely aligned with the rack connectors.
Press the HPm module carefully into the rack connectors and tighten the screws.
Connect the HPm module with your audio environment using the connections from
your 500 Series rack.
Connect Headphones.
Insert the power cable to the 500 Series rack and switch it on.
EN

Especificaciones del producto

Marca: SPL
Categoría: receptor
Modelo: HPm

¿Necesitas ayuda?

Si necesitas ayuda con SPL HPm haz una pregunta a continuación y otros usuarios te responderán




receptor SPL Manuales

receptor Manuales

Últimos receptor Manuales