StarTech.com FCREADMICRO3 Manual de Usario

StarTech.com Lector de tarjetas de memoria FCREADMICRO3

Lee a continuación 📖 el manual en español para StarTech.com FCREADMICRO3 (2 páginas) en la categoría Lector de tarjetas de memoria. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

I T: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

P T: Guia do usuário - pt.startech.com

Manual Revision: 06/19/2013

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1x USB 3.0 Multi Media Memory Card Reader Adapter

• 1x Instruction Manual

FCREADMICRO3

USB 3.0 Multi Media Memory Card Reader Adapter

*actual product may vary from photos

Hardware Installation

1. Ensure the host computer is powered on. Insert the

FCREADMICRO3 USB 3.0 type ‘A’ connector into an available

USB 3.0 (backward compatible with USB 2.0) port on the host

computer.

2. The computer operating system will recognize that the Card

Reader has been connected, and will automatically install the

necessary drivers.

To ensure the FCREADMICRO3 has been properly installed on the

host computer:

a. In a Windows® operating environment, browse to the Control

Panel and double-click on the System icon (Start -> Control

Panel -> System). Click on the Hardware tab, then on Device

Manager. Here, you will nd Generic Storage Device USB

Device listed under Disk Drives.

b. In a MAC OS operating environment, browse to the System

Proler (Go -> Utilities -> System Proler). Click on Hardware,

then on USB. In the top right pane, click on USB High Speed

Bus; here, you will nd USB Reader listed.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access

our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned

for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow

the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Specications

Supported Card

Formats

Secure Digital (SD), MultiMedia Card

(MMC), Mini-SD, Micro-SD/SDHC

(T-ash),

SDHC, SDXC, RS-MMC, Mobile-MMC

and MMC-micro, Memory Stick (MS),

Memory Stick PRO (MS-PRO), MS Duo,

MS-PRO Duo,

Memory Stick XC and Micro-MS (M2),

MSPRO-HG Duo 8-bit mode

Form Factor USB 3.0

Operating System

Support

Windows XP/Vista/7/8, Mac OSX, and

Linux

Chipset ID Realtek RTS5307

Connector A 1x USB 3.0 A Male

Maximum Data Transfer

Rate 5 Gbit/s

Safe Removal

To prevent damage to the contents of the memory/media card,

please ensure you are following the correct procedure for removing

storage from the operating system you are using.

• In a Windows® operating environment, when the memory/

media card is rst connected, the Safely Remove Hardware icon

will appear. Right-click on the icon, and select Safely Remove

Hardware. When the Safely Remove Hardware window appears,

select , then click on . This will, in USB Mass Storage Device Stop

turn, open the Stop a Hardware Device window. Select the USB

Mass Storage Device again, and click on , then wait for the OK

operating system to notify you that it can now be safely removed.

• In a MAC OS operating environment, the added memory cards

will appear on the desktop as disk drives. To safely remove the

indicated drive(s), simply click and drag the icon to the Trash.

WARNING! Please note that when removing media cards connected

to FCREADMICRO, you are required to remove/ eject the device from

within the operating system (i.e. in Windows, use the Safely Remove

Hardware function). Failure to remove devices properly can result in

lost data, or permanent damage to the card or Card Reader. See Safe

Removal (reverse) for further detail.

Especificaciones del producto

Marca:	StarTech.com
Categoría:	Lector de tarjetas de memoria
Modelo:	FCREADMICRO3
Ancho:	170 mm
Profundidad:	170 mm
red LAN:	Ja
Tipo de fuente de energía:	ATX
Cables suministrados:	SATA
Número de puertos USB 2.0:	4
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	2
Salidas de auriculares:	1
HDCP:	Ja
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	2
Zócalo del procesador:	LGA 1150 (Socket H3)
Fabricante del procesador:	Intel
Memoria interna máxima:	16 GB
Canales de salida de audio:	7.1 kanalen
Guía de Instalación Rápida:	Ja
Tipo de interfaz Ethernet:	Gigabit Ethernet
placa base con chipset:	Intel® B85
Tipo de ranura de memoria:	DIMM
chip de audio:	Realtek ALC892
Controladores suministrados:	Ja
Salida S/PDIF:	Ja
Canal de memoria:	Dubbelkanaals
Ranuras PCI Express x16 (Gen. 3.x):	1
Interfaces de unidad de almacenamiento compatibles:	SATA II, SATA III
Puerto(s) PS/2:	1
Componente para:	PC
Controlador LAN:	Realtek RTL8111G
Versión de DirectX:	11.1
Número de conectores SATA III:	2
Procesadores compatibles:	Intel® Pentium®
Tipos de memoria soportados:	DDR3-SDRAM
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	mini ITX
Número de ranuras de memoria:	2
Velocidades de reloj de memoria admitidas:	1066,1333,1600 MHz
tipo de BIOS:	UEFI
Conexión para refrigerador de CPU:	Ja
Conexiones para ventiladores de caja:	1
Número de conexiones SATA:	5
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	1
Potencia térmica del procesador (máx.):	95 W
Número de conectores SATA II:	2
Cantidad de puertos mSATA:	1
Encabezados de puerto serie:	1