StarTech.com FCREADU3C Manual de Usario

StarTech.com Lector de tarjetas de memoria FCREADU3C

Lee a continuación 📖 el manual en español para StarTech.com FCREADU3C (2 páginas) en la categoría Lector de tarjetas de memoria. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 08/09/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/FCREADU3C.

Package contents

• 1 x multi-card reader and writer

• 1 x instruction manual

System requirements

• microSD™ card, SD™ card, or CompactFlash® card

• Computer, tablet, or device enabled with a USB Type-C™ port

The FCREADU3C is OS independent and doesn’t require any

additional drivers or software. The FCREADU3C receives enough

power through the USB bus and doesn’t require an additional power

source.

System requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/FCREADU3C.

FCREADU3C

USB 3.0 Flash Memory Multi-Card Reader/Writer with USB-C

*actual product may vary from photos

Introduction

The FCREADU3C provides a quick and easy way to access data stored

on dierent types of media cards, and supports data transfers at

speeds up to 5Gbps. You can use this card reader with a computer,

tablet, or device that’s enabled with a USB-C™ port.

Product diagram

SD card slot microSD card slot

CompactFlash card slot

USB-C plug

About USB 3.0 and USB 3.1 Gen 1

USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard

oers speeds up to 5Gbps.

Note: Data transfer rates are dependent upon the speed of the

memory card you are using and the speed capabilities of the USB

port on your host device.

Card support

The FCREADU3C supports the following types of memory cards:

• microSD, microSDHC™, microSDXC™

• CompactFlash Type I and Type II card

• Secure Digital (SDSC), Secure Digital eXtended Capacity (SDXC™)

card, Secure Digital High Capacity (SDHC™) card

Use the FCREADU3C

1. Gently slide a memory card into the appropriate card slot on the

FCREADU3C until you feel resistance and the card is fully inserted.

2. Insert the on the USB card reader into the USB port USB-C plug

on your computer, tablet, or device.

3. To access content on the USB card reader, follow the instructions

specic to the OS that you’re running.

Note: Avoid inserting multiple cards into the card reader at the same

time. You can only access data stored on one card at a time.

Troubleshooting

I can’t access the data stored on my cards

If you’re experiencing issues when you try to access the data stored

on your memory card, consider the following:

• Some operating systems may not support all le formats. Make

sure that the operating system you’re using supports the type of

memory card and the les that you’re trying to access.

• If you insert multiple memory cards into the FCREADU3C, you

won’t be able to access the data stored on the cards at the same

time. Make sure that you only insert one memory card in the card

reader.

Note: The FCREADU3C prioritizes card access based on the most

recent memory card that was inserted.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.