Sun Joe 24V-HCSWP-CT Manual de Usario
Sun Joe
máquina de aserrar
24V-HCSWP-CT
Lee a continuación 📖 el manual en español para Sun Joe 24V-HCSWP-CT (76 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/76
Original instructions.
© 2022 Snow Joe, LLC. All rights reserved.
1
A Division of Snow Joe, LLC Model 24V-HCSWP-CT Form No. SJ-24V-HCSWP-CT-880E-M
R
OPERATOR’S MANUAL
CORDLESS TELESCOPING
POLE + PRUNING SAW – TOOL ONLY
24V MAX* | 250W | 5" BAR + CHAIN LENGTH
EN
*Initial no-load voltage, when fully charged, peaks at 24 volts;
nominal voltage under typical load is 21.6 volts.
SAVE THESE INSTRUCTIONS
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety
mWARNING! This appliance is not intended for use
by children or by unassisted, unsupervised persons whose
physical, sensory or mental capabilities prevent them from
using it safely. Children should be supervised to ensure that
they do not play with the appliance.
Before starting up your machine, please check it carefully for
any defects. If you nd any, do not start up your machine.
Contact your authorized Snow Joe® + Sun Joe® dealer or
call the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563).
mWARNING! When using the power tool, basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury. These include:
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents. Always inspect the area where the
pole + pruning saw is to be used.
2. Avoid dangerous environments – Do not use the power
tool in rain, in damp or wet locations, or in bad weather,
especially when there is a risk of lighting. This decreases
the risk of being struck by lighting. Do not operate the
power tool in gaseous or explosive atmospheres or use
the power tool near ammable or combustible liquids.
Motors in these tools may spark, and the sparks might
ignite fumes.
3. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls.
4. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe
distance away from the work area.
5. Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Protective rubber
gloves and non-slip footwear are recommended when
working outdoors.
6. Avoid Slipping – Exercise caution to avoid slipping or
falling. Wear protective footwear that will protect your feet
and improve your footing on slippery surfaces.
7. Stay alert – Watch what you are doing. Use common
sense. Do not operate the power tool when you are tired,
or under the inuence of alcohol or drugs.
8. Do not overreach – Keep proper footing and balance at
xall times.
9. Prevent unintentional starting – Do not pull the trigger
before connecting to battery pack, picking up or carrying
the appliance. Do not carry the pole + pruning saw with
your nger on the trigger.
10.
Use the right appliance – Do not use the power tool for
any applications other than those for which it was intended.
11. The chain is sharp – Don't grasp the exposed chain or
cutting edges when picking up or holding the power tool.
12. Use two hands – Hold the telescoping pole and handle
with both hands to avoid loss of control.
13. Remove the battery – Remove the battery from the
power tool when it is not in use, before servicing it, when
changing accessories, and when performing any other
maintenance task.
14.
Use safety glasses – Also use safety footwear, snug-tting
clothing, protective gloves, hearing and head protection.
15. Use head protection – Always use head protection when
operating the power tool overhead. Falling debris can
result in serious personal injury.
16. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
17. Check for damaged parts – Before further use of the
appliance, all guards and parts should be carefully
checked to determine that it will operate properly and
perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may aect its
operation. A guard or other part that is damaged should
be properly repaired or replaced. Contact the Snow Joe®
+ Sun Joe® customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
18. Maintain the power tool with care – Keep the cutting
edges sharp and clean for optimal performance and to
reduce the risk of injury. Keep the handles dry, clean,
and free from oil and grease. Follow the additional
recommendations described in the maintenance section
of this manual.
2
19. Store indoors – When not in use, the power tool should
be stored indoors in a dry and high or locked-up place out
of the reach of children.
20. Do not use the power tool if the trigger does not turn it
on and o. Any power tool that cannot be controlled is
dangerous and must be repaired.
21. Keep all parts of the body away from the chain. Do not
remove cut material or hold material to be cut while the chain
is moving. Make sure the switch is o when clearing jammed
material. The chain will continue moving for a while after the
tool is turned o. A moment of inattention while operating the
power tool may result in serious personal injury.
22. Carry the power tool by the handle with the chain
stopped. When transporting or storing the power tool,
always keep the chain and guide bar in the bar sheath.
Proper handling of the pole + pruning saw will reduce the
chance of personal injury.
23. Hold the product by insulated surfaces only. In the event
that the chain comes into contact with hidden wiring,
exposed metal parts of the product may become “live”
and give the operator an electric shock.
24. The unit has not been designed to provide protection
from electric shock in the event of contact with overhead
electric lines. Never use the power tool near any electrical
power lines. Contact with or use near power lines may
cause serious injury or electric shock resulting in death.
Maintain a minimum clearance of 50 ft (15 m) from all
power lines.
mWARNING! Before inspecting, cleaning, or servicing
the machine, remove the battery and wait for all moving parts
to stop. Failure to follow these instructions can result in serious
personal injury or property damage.
mWARNING! Do not use this appliance without reading
this instruction manual.
mWARNING! Do not use the appliance within range of
persons unless they are wearing protective clothing.
mWARNING! Do not operate the cordless power tool in a
tree, on a ladder, or on scaolding. Using the tool under such
circumstances is extremely dangerous.
mWARNING! Do not let familiarity with this type of tool
prevent you from taking all necessary precautions. Remember
that a careless fraction of a second is sucient to inict
serious injury.
mWARNING! The cordless pole + pruning saw must be
fully assembled before operation! Do not use the tool that is
only partly assembled or assembled with damaged parts!
mWARNING! Starting, stopping, and restarting an electric
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless power tool, always wait at least ve seconds after
stopping before restarting the unit.
mWARNING! Electrical Shock Hazard – Before starting
up your machine, please check it carefully for any defects. If
you nd any, do not start up your machine and contact your
distributor.
NOTE: Take care of small parts that are removed during
assembly or when making adjustments. Keep them secure to
avoid loss.
Please contact an authorized Snow Joe® + Sun Joe® dealer
or call the Snow Joe® + Sun Joe® customer service center
at 1-866-SNOWJOE (1-866-766-9563) for all maintenance
or operations not foreseen in this manual. Any operation
performed in an unauthorized service center or by unqualied
personnel will completely invalidate the warranty.
mWARNING! For your safety and that of others:
• Correct maintenance is essential to maintain the original
eciency and safety of the machine over time.
• Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
• Never use the machine with worn or damaged parts.
Damaged parts are to be replaced and never repaired.
mWARNING! Always wear protective gloves during
maintenance operations.
mWARNING! Use only original manufacturer’s
replacement parts, accessories and attachments. Failure to do
so can cause possible injury and poor performance. To order
genuine replacement parts or accessories for the Sun Joe®
iON+ cordless pole + pruning saw, please visit sunjoe.com or
contact the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563).
Cleaning the Tool
mWARNING! Never let any liquid get inside the motor
housing and NEVER immerse any part of the housing in liquid.
1. Stop the motor and remove the battery.
2. Clean dirt and debris from the body of the tool, using a
damp cloth with a mild detergent.
Do not use any strong detergents on the plastic NOTE:
housing or the handle, as they can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as acetone.
Storage
mWARNING! Do not at any time let brake uids, gasoline,
petroleum-based products, penetrating oils, solvents, etc.,
come in contact with plastic parts. Chemicals can damage,
weaken, or destroy plastic which may result in serious
personal injury.
1. Stop the motor and remove the battery.
2. Clean the pole + pruning saw thoroughly before storing.
3
3. Always place the bar sheath on the guide bar before
storing or transporting the pole + pruning saw. Use
caution to avoid the sharp chain.
4. Store the pole + pruning saw indoors, in a dry place that is
inaccessible to children. Keep away from corrosive agents
such as garden chemicals and de-icing salts.
5. We recommend using the original package for storage or
covering the product with a suitable cloth or enclosure to
protect it against dust.
Specic Safety Warnings
for Pole + Pruning saw
1. Only the pole + pruning saw operator should be in the
work area.
2. Do not use the pole + pruning saw to cut down trees.
3. Always use two hands when operating the pole + pruning
saw. Grip the pole + pruning saw securely with one hand
on the trigger and the other hand on the pole.
4. Before starting the pole + pruning saw, make sure that the
saw chain is not in contact with any object.
5. Do not allow the pole + pruning saw to make contact with
grounded objects such as pipes, fences, and metal posts.
6. Do not force the pole + pruning saw while cutting. Apply
light pressure. It will perform more eectively and safely if
it is used at the rate for which it was designed.
7. Use extreme caution when cutting a limb that is under
tension. When wood tension is released, the limb could
spring back and strike the operator, causing severe injury
or death.
8. During transport, hold the pole at its balance point, with
the guide bar and chain facing to the rear.
9. Do not cut small brush and saplings with the pole +
pruning saw. Small branches may catch in the chain and
be whipped towards the operator, which could pull the
operator o balance.
10. Never stand directly under the limb you are trimming.
Always position yourself outside the path of falling debris.
11. Keep a rm, steady pressure on the pole + pruning saw
while cutting. Do not try to cut limbs larger in diameter
than the length of the guide bar.
12. Keep other people and pets away from the cutting end of
the pole + pruning saw and at a safe distance away from
the work area.
Kickback
mWARNING! Kickback may occur when the nose or tip
of the guide bar touches an object, or when the wood closes
in and pinches the saw chain in the cut.
AVOID CONTACTING THE GUIDE BAR TIP WITH ANY
OBJECT. In some cases, when the tip makes contact with
an object, the saw may rapidly kick up and back towards the
operator. Material pinching the chain may also push the saw
back rapidly towards the operator. Either of these reactions
may cause you to lose control of the pole + pruning saw, which
could result in serious personal injury. Follow the necessary
precautions indicated below to avoid kickbacks.
• Always use two hands when operating the pole + pruning
saw, one hand gripping the trigger and the other hand
gripping the pole. Use a rm grip. Thumbs and ngers
must wrap around the trigger and the pole.
• Keep all guards in place on the pole + pruning saw. Make
sure they are in proper working order.
• Do not overreach or extend arms above shoulder height.
• Keep solid footing and balance at all times.
• Never try cutting through two branches at the same time.
Only cut one at a time.
• Do not bury the guide bar nose or try to cut by boring the
guide bar nose into the wood.
• Watch for shifting of wood or other forces that may pinch
the chain.
• Use extreme caution when re-entering a previous cut.
• Use the chain and guide bar supplied with this pole +
pruning saw. Only use genuine Snow Joe® + Sun Joe®
replacement parts designed specically for use with this
pole + pruning saw.
• Never use a dull or loose chain. Keep the chain sharp and
properly tensioned.
Battery & Charger
Safety Instructions
NOTE: This unit is the tool only. The battery and the charger
are not included. They must be purchased separately.
Model 24V-HCSWP-CT is compatible with the 24V iON+
System batteries and chargers. See page 21 for more
information.
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery pack can cause cell damage.
IMPORTANT! Analyses conrm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for personal and/or product damage.
Especificaciones del producto
| Marca: | Sun Joe |
| Categoría: | máquina de aserrar |
| Modelo: | 24V-HCSWP-CT |
¿Necesitas ayuda?
Si necesitas ayuda con Sun Joe 24V-HCSWP-CT haz una pregunta a continuación y otros usuarios te responderán
máquina de aserrar Sun Joe Manuales
27 Octubre 2024
14 Septiembre 2024
31 Agosto 2024
17 Agosto 2024
15 Agosto 2024
15 Agosto 2024
12 Agosto 2024
11 Agosto 2024
11 Agosto 2024
9 Agosto 2024
máquina de aserrar Manuales
- máquina de aserrar Bosch
- máquina de aserrar AEG
- máquina de aserrar DeWalt
- máquina de aserrar Ford
- máquina de aserrar Silverline
- máquina de aserrar Brennenstuhl
- máquina de aserrar Ferm
- máquina de aserrar Clarke
- máquina de aserrar Ozito
- máquina de aserrar Gude
- máquina de aserrar Makita
- máquina de aserrar Draper
- máquina de aserrar Hitachi
- máquina de aserrar Black And Decker
- máquina de aserrar Vonroc
- máquina de aserrar Remington
- máquina de aserrar ACG
- máquina de aserrar Stanley
- máquina de aserrar Skil
- máquina de aserrar Hyundai
- máquina de aserrar Hilti
- máquina de aserrar Ryobi
- máquina de aserrar Florabest
- máquina de aserrar Festool
- máquina de aserrar Metabo
- máquina de aserrar Parkside
- máquina de aserrar Worx
- máquina de aserrar Meec Tools
- máquina de aserrar Milwaukee
- máquina de aserrar Hikoki
- máquina de aserrar Dremel
- máquina de aserrar Sovereign
- máquina de aserrar Tacklife
- máquina de aserrar Hazet
- máquina de aserrar Einhell
- máquina de aserrar Baumr-AG
- máquina de aserrar Yard Force
- máquina de aserrar Ferrex
- máquina de aserrar Husqvarna
- máquina de aserrar Maktec
- máquina de aserrar Craftsman
- máquina de aserrar Power Craft
- máquina de aserrar Powerplus
- máquina de aserrar Stiga
- máquina de aserrar Porter-Cable
- máquina de aserrar Cotech
- máquina de aserrar Genesis
- máquina de aserrar Trotec
- máquina de aserrar Troy-Bilt
- máquina de aserrar Cobra
- máquina de aserrar Texas
- máquina de aserrar Spear & Jackson
- máquina de aserrar Scheppach
- máquina de aserrar Atika
- máquina de aserrar McCulloch
- máquina de aserrar Sterwins
- máquina de aserrar Matrix
- máquina de aserrar Stihl
- máquina de aserrar Bavaria
- máquina de aserrar Dolmar
- máquina de aserrar Shindaiwa
- máquina de aserrar Flex
- máquina de aserrar Prime3
- máquina de aserrar Zipper
- máquina de aserrar Mafell
- máquina de aserrar Greenworks
- máquina de aserrar Fieldmann
- máquina de aserrar Max
- máquina de aserrar IKRA
- máquina de aserrar Truper
- máquina de aserrar Masport
- máquina de aserrar Grizzly
- máquina de aserrar Solo
- máquina de aserrar Cocraft
- máquina de aserrar MTM
- máquina de aserrar Maruyama
- máquina de aserrar Herkules
- máquina de aserrar Meister Craft
- máquina de aserrar Toolcraft
- máquina de aserrar RIDGID
- máquina de aserrar Batavia
- máquina de aserrar Proxxon
- máquina de aserrar Gardenline
- máquina de aserrar Holzmann
- máquina de aserrar Fein
- máquina de aserrar Oregon Scientific
- máquina de aserrar Elu
- máquina de aserrar Max Bahr
- máquina de aserrar Plantiflor
- máquina de aserrar Goon
- máquina de aserrar Triton
- máquina de aserrar BGU
- máquina de aserrar Wolfcraft
- máquina de aserrar Dedra
- máquina de aserrar Verto
- máquina de aserrar Anova
- máquina de aserrar Challenge Xtreme
- máquina de aserrar Global
- máquina de aserrar Rikon
- máquina de aserrar Elektra Beckum
- máquina de aserrar Duro Pro
- máquina de aserrar Toolson
- máquina de aserrar Toledo
- máquina de aserrar Jonsered
- máquina de aserrar MSW
- máquina de aserrar Royal Catering
- máquina de aserrar Robust
- máquina de aserrar Ultranatura
- máquina de aserrar FIXIT
- máquina de aserrar Einhell Bavaria
- máquina de aserrar Ergotools Pattfield
- máquina de aserrar MyTool
- máquina de aserrar McKenzie
- máquina de aserrar Proviel
- máquina de aserrar Morrison
- máquina de aserrar Garland
- máquina de aserrar Bavaria By Einhell
- máquina de aserrar Donau Elektronik
- máquina de aserrar Chicago Pneumatic
- máquina de aserrar Rona
- máquina de aserrar Bestgreen
- máquina de aserrar CMI
- máquina de aserrar MacAllister
- máquina de aserrar TAURUS Titanium
- máquina de aserrar Maxbear
- máquina de aserrar Evolution
- máquina de aserrar Extralink
- máquina de aserrar Yellow Garden Line
- máquina de aserrar Stalco
Últimos máquina de aserrar Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
22 Octubre 2024
21 Octubre 2024