Supermicro 370DLI Manual de Usario

Lee a continuación 📖 el manual en español para Supermicro 370DLI (106 páginas) en la categoría Placas base. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/106
®
SUPER S2DL3
SUPER 370DL3
SUPER 370DLE
SUPER 370DLR
SUPER 370DLI
USERS MANUAL
Revision 2.0
SUPER
The information in this Users Manual has been carefully reviewed and is believed to be
accurate. The vendor assumes no responsibility for any inaccuracies that may be contained
in this document, makes no commitment to update or to keep current the information in this
manual, or to notify any person or organization of the updates.
Please Note: For the
most up-to-date version of this manual, please see our web site at
www.supermicro.com.
SUPERMICRO COMPUTER reserves the right to make changes to the product described in
this manual at any time and without notice. This product, including software, if any, and
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE
LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa
Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total
liability for all claims will not exceed the price paid for the hardware product.
Unless you request and receive written permission from SUPER MICRO COMPUTER, you
may not copy any part of this document.
Information in this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 2000 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America.
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use
of the SUPER S2DL3/370DL3/370DLE/370DLR/370DLI motherboard. The
SUPER S2DL3 supports single or dual Pentium
® III/II Xeon 400 MHz-1GHz
processors with a 133/100 MHz front side bus. The SUPER 370DL3/370DLE/
370DLR/370DLI supports single or dual Pentium
® III 500 MHz-1 GHz FCPGA
processors with a 133/100 MHz front side bus. Please refer to the support
section of our web site (http://www.supermicro.com/TechSupport.htm) for a
complete listing of supported processors.
Pentium III FCPGA (Flip Chip Pin Grid Array) processors are housed in a 370-
pin socket, which is the new standard that will support future Intel processors.
Xeon processors are based on the "Slot 2" architecture.
Manual Organization
Chapter 1 includes a checklist of what should be included in your mainboard
box, describes the features, specifications and performance of the SUPER
S2DL3/370DL3/370DLE/370DLR/370DLI mainboard and provides detailed in-
formation about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices. Read
this chapter when you want to install the processor and DIMM memory mod-
ules and when mounting the mainboard in the chassis. Also refer to this
chapter to connect the floppy and hard disk drives, SCSI drives, the IDE
interfaces, the parallel and serial ports and the twisted wires for the power
supply, the reset button, the keylock/power LED, the speaker and the key-
board.
If you encounter any problems, read Chapter 3, which describes trouble-
shooting procedures for the video, the memory and the setup configuration
stored in CMOS. For quick reference, a general FAQ [Frequently Asked
iii
Preface

Especificaciones del producto

Marca: Supermicro
Categoría: Placas base
Modelo: 370DLI
Color del producto: Wit
Peso.: 670 g
Altura: 97.5 mm
Amable: IP-beveiligingscamera
Código de seguridad internacional (IP): IP66
Formatos de vídeo soportados: H.264, M-JPEG
factor vorm: Dome
Tecnología de conectividad: Bedraad
red LAN: Ja
Método de montaje: Plafond
Modos de vídeo compatibles: 720p, 960p, 1080p
Resolución Máxima: 1920 x 1080 Pixels
Número total de megapíxeles: 2 MP
Formatos de compresión de vídeo: H.264, M-JPEG
Diámetro: 112 mm
Tipo de fuente de energía: Power over Ethernet (PoE)
Salida de corriente (voltios): 12
Iluminación mínima: 0.01 Lux
Vision nocturna: Ja
Distancia focal fija: 4 mm
Detección de movimiento por vídeo: Ja
Número de puertos Ethernet LAN (RJ-45): 1
Consumo de energía (máx.): 5.5 W
Tamaño del sensor óptico: 1/2.8 "
Tipo de sensor de imagen: CMOS
Zoom óptico: - x
Micrófono incorporado: Nee
Máximo 30 cuadros por segundo: 30 fps
Protocolos de red compatibles: TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IP v6, Bonjour
filtro de dirección IP: Ja
Exploración progresiva: Ja
Tipo de interfaz Ethernet: Fast Ethernet
Alimentación a través de Ethernet (PoE): Ja
Scherpstellen: 2.0
Control PTZ: Ja
Ángulo de rotación: 360 °
rango de panorámica: 0 - 360 °
Modo día/noche: Ja
Sensor de movimiento: Ja
Alcance de visión nocturna: 30 m
Ajuste de calidad de imagen: Brightness, Contrast, Saturation, Sharpness
Protección de la privacidad: Ja
Amplio rango dinámico (WDR): Ja
Temperatura de funcionamiento (TT): -30 - 60 °C
Humedad relativa de funcionamiento (VV): 0 - 95 procent
Rango de ángulo de inclinación: 0 - 75 °
Máscara zona privada: Ja
Girar y reflejar: Ja
Alarma activa de desmontaje no autorizado: Ja

¿Necesitas ayuda?

Si necesitas ayuda con Supermicro 370DLI haz una pregunta a continuación y otros usuarios te responderán