Supermicro X9SBAA Manual de Usario
Supermicro
Placas base
X9SBAA
Lee a continuación 📖 el manual en español para Supermicro X9SBAA (85 páginas) en la categoría Placas base. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/85
X9SBAA
X9SBAA-F
USER’S MANUAL
Revision 1.0a
Manual Revision 1.0a
Release Date: April 15, 2013
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document. Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their
respective companies or mark holders.
Copyright © 2013 by Super Micro Computer, Inc. All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause interference with radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, you are encouraged to try to correct the interference by one or more
of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/television technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this prod-
uct may expose you to lead, a chemical known to the State of
California to cause birth defects and other reproductive harm.
iii
Preface
About This Manual
This manu al is writ t en fo r sy stem i nteg rato rs, P C tech nic ians and
knowledgeable PC users. It provides information for the installation and use of
the X9SBAA motherboard product series. This product is intended to be
professionally installed and serviced by a technician.
About This Motherboard
The X9SBAA motherboard series is a value-driven product aimed at users who
demand a reduced-cost, low-power motherboard for PC, storage, embedded or
micro server platform applications.
The X9SBAA motherboard series comes with the Intel® ATOM SoC S1260
(BGA1283, 8.5W) CPU installed and other features such as ECC-DIMM support,
USB 3.0 ports, SATA 3.0 ports, and on-board VGA and IPMI LAN (X9SBAA-F). This
enables the X9SBAA motherboard series to deliver cost-effective performance in
a small form-factor package.
Manual Organization
Chapter 1describesthefeatures,specicationsandperformanceofthemainboard
and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes troubleChapter 3 -
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Driver Installation Instructions.
Preface
Especificaciones del producto
| Marca: | Supermicro |
| Categoría: | Placas base |
| Modelo: | X9SBAA |
¿Necesitas ayuda?
Si necesitas ayuda con Supermicro X9SBAA haz una pregunta a continuación y otros usuarios te responderán
Placas base Supermicro Manuales
21 Octubre 2024
7 Octubre 2024
23 Julio 2024
23 Julio 2024
21 Julio 2024
20 Julio 2024
Placas base Manuales
Últimos Placas base Manuales
8 Octubre 2024
7 Octubre 2024
24 Julio 2024
23 Julio 2024
22 Julio 2024
19 Julio 2024
18 Julio 2024
16 Julio 2024