Synco Vlogger Kit 2 Manual de Usario

Synco micrófono Vlogger Kit 2

Lee a continuación 📖 el manual en español para Synco Vlogger Kit 2 (2 páginas) en la categoría micrófono. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Thank you for choosing SYNCO product.

Please read this manual carefully before use and follow all instructions mentioned

herein.

Caring For Your SYNCO Product

Please keep the product in a dry, clean, dust-free environment.

Keep corrosive chemicals, liquids and heat source away from the product to

prevent mechanics damage.

Use only a soft and dry cloth for cleaning the product.

Malfunction may be caused by dropping, impact of external force.

Do not attempt to disassemble the product. Doing so voids warranty.

Please have the product checked or repaired by authorized technicians if any

malfunctions happened.

Failure to follow all the instructions may result in mechanics damage.

Warranty does not apply to human errors.

Insert the microphone body into the

shock mount. Make sure it is secure and

well-balanced.

① Power & Adjustment Dial

Turn the dial to the right to turn the light on

and left to turn the light out.

When the light is on, rotate the dial to adjust

light e󽗈ect.

② Battery Cover

Please place two AA batteries inside the light

before use, and remove the batteries for

storage.

③ Cold Shoe Mount

④ 1/4” Screw Hole

⑤ Cold Shoe

Microphone Usage

Video Light Instructions

The phone holder provides one cold shoe mount and two 1/4” threads for

attaching microphone or video light, and tripod.

1. Attach the phone holder to the tripod via the 1/4” threads.

2. Unscrew the knob beside the tripod to adjust the 󽗉lming angle.

3. Fasten the knob to 󽗉x the phone holder.

4. Place the smartphone into the clamp and adjust it.

5. Install the video light on the phone holder via the cold shoe mount.

6. Fix the microphone to the cold shoe mount on the video light.

7. Connect the microphone with your phone via the 3.5mm TRRS phone cable.

Kit Installation

1/4” threads

cold shoe mount

Warranty Exclusions and Limitations

Faults resulted from inappropriate use of a product without following its

operation speci󽗉cation

Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking

Modi󽗉cations to a product by its user or a third party without prior written

consent of SYNCO, e.g. replacement of element or circuit, label alteration

The code on product is inconsistent with that of warranty certi󽗉cate, or the

code on the product or warranty certi󽗉cate is altered or torn o󽗈

All consumable accessory attached to a product, like cable, wind mu󽗈, battery

Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.

Warranty Claim Procedure

If failure or any problem occurs to your product after purchase, please contact

a local agent for assistance, or you can always contact SYNCO’s customer

service through email at

support@syncoaudio.com.

Please retain your sales receipt and warranty certi󽗉cate as proof of purchase.

If any of these documents is missing, only sales return or chargeable service

will be provided.

If the SYNCO product is out of the warranty coverage, the service and the parts

cost will be charged.

Warranty Period

Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of quality

defect(s) found in the product under normal use within 30 days upon receipt of

the product.

2. Original SYNCO products are entitled to limited warranty service. 12-month

Warranty

Transducer

Polar Pattern

Frequency Response

Signal/Noise

Max. SPL

Sensitivity

Power Requirement

Connector

Dimensions

Net Weight

Color Temperature

Power

Power Requirement

Material

Color

Dimension

Clamp Range

Net Weight

Condenser

Cardioid

100Hz-20KHz/ ±3dB

＞60dB

130dB@1KHz, 1%THD

-35dB re 1 Volt/pasal(18.00mV@94dB SPL ) +1/-2dB@1KHz

Plug-in Power

3.5mm TRS/3.5mm TRRS

Φ21.5x 72mm

35g

5000K

5.5W

2* AA Batteries

Plastic

Black

7.5 x 3.5 x 2.5cm

5.5-8cm

35g

Microphone

Video Light

Phone Holder

Speci󽗉cations WARRANTY CERTIFICATE

USER

INFORMATION

SALES

INFORMATION

REPAIR

RECORD

RESULT

Please register your warranty. Meanwhile, you are welcomed to contact us

via Email：support@syncoaudio.com

Customer Name:

Phone Number:

Email:

Address:

Sales Date:

Model:

Product Code:

Dealer:

Service Date:

Technician:

Issue:

Solved Unsolved Returned(Replaced)

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000

support@syncoaudio.com

www.syncoaudio.com

https://www.facebook.com/syncomicrophones

Guangzhou Zhiying Technology Co., Ltd

The warranty period begins on the date of purchase of brand new, unused

products by the 󽗉rst end-user.

Within the warranty period, if product defect or failure is attributable to material

defection or technological problem, the defective product or defective part will

be repaired or replaced without charge (service and materials fee).

Especificaciones del producto

Marca:	Synco
Categoría:	micrófono
Modelo:	Vlogger Kit 2
Color del producto:	Zwart
Manual de usuario:	Ja
Fuente de alimentación:	100 - 240V
Tecnología de conectividad:	Bedraad
red LAN:	Nee
Tarjetas de memoria compatibles:	SD
Guía de inicio rápido:	Ja
Tarjeta de garantía:	Ja
Número de puertos USB 2.0:	1
Conexión para adaptador de red:	Ja
Cámara integrada:	Nee
Conecta y reproduce:	Nee
Cambio de hora:	Ja
Conexiones:	1x Scart\n1x Composite Line-In
Tipo de comida:	AC
Es posible actualizar el firmware:	Ja
Recargable:	Ja
Salida de vídeo compuesto:	1
El número de discos duros instalados.:	1
Capacidad del disco duro:	0 GB
Velocidad de rotación del disco duro:	7200 RPM
Salida de S-Video:	1
Vídeo de grupo de componentes (YPbPr/YCbCr):	1
cliente DHCP:	Nee
PictBridge:	Nee
Salida S/PDIF:	Ja
Tamaño del disco duro:	3.5 "
Capacidad máxima de almacenamiento:	1 TB
Mando a distancia incluido:	Ja
Unidad, tamaño del búfer:	8 MB
Wifi.:	Nee
Tipo de Batería:	CR2032
Sistemas de archivos compatibles:	FAT32
Cable de audio/vídeo:	1