Tacklife PJS03A Manual de Usario

Tacklife máquina de aserrar PJS03A

Lee a continuación 📖 el manual en español para Tacklife PJS03A (37 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/37

Use lr Manua

Jig Saw

Model: PJS03A

Jig Saw

PJS03A

English

Deutsch

Français

Españo

Italiano

日本语

01~05

06~11

12~17

18~23

24~29

30~34

Contents

Warning symbols

WARNING! To reduce the risk of injury, user must read instruction manual.

Double insulation

General Safety Instructions

WARNING! Read all safety warnings and all instructions. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or

battery operated (cordless) power tool.

1. Work area safety

2. Electrical safety

3. Personal safety

4. Power tool use and care

Keep work area clean and well lit. Cluttered and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases

or dust. Power tools create sparks which may ignite the dust or fumes.

Kee ren p child and tand s bys er away while operati a pow l ang er too . trDis ct oni s ca aus yn c e ou to lose control.

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs

with earthed ( de powgroun d) er too . Unmols dified plugs and ma itchng outlets will is re uce rd k of electr c i shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of

electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord

away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of

electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protect-

ed supply. Use of an RCD reduces the risk of electric shock.

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use

a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source

and / or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch

or energising power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached

to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power

tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

If devices are provided for the connection of dust extraction and collection facilities, ensure these are

connected and properly used. Use of these devices can reduce dust related hazards.

Do not force the power tool. Use the correct power tool for your application. The correct power tool will

do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power too that cannot be

controlled with the switch is dangerous and must be repaired.

Especificaciones del producto

Marca:	Tacklife
Categoría:	máquina de aserrar
Modelo:	PJS03A
Color del producto:	Zwart
Pantalla incorporada:	Ja
Peso.:	6000 g
Ancho:	255 mm
Profundidad:	290 mm
Altura:	146 mm
Nivel de ruido:	35.5 dB
Frecuencia del procesador:	1.2 GHz
Familia de procesadores:	ROC
Número de núcleos de procesador:	2
Puerto USB:	Nee
red LAN:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Memoria interna:	2 GB
Tipo de memoria interna:	DDR3
Número de DisplayPorts:	1
Soporta Windows:	Ja
numero de fans:	2 ventilator(en)
Soporta el sistema operativo Mac:	Ja
Tipo de vivienda:	Tower
Capacidad de la unidad de fuente de alimentación (PSU):	180 W
Unidades de almacenamiento instaladas:	Nee
Unidad de almacenamiento instalada:	Nee
Capacidad de la unidad de almacenamiento:	- GB
Capacidad total de almacenamiento instalada:	- TB
Memoria de velocidad de reloj:	1866 MHz
Número de puertos Thunderbolt 3:	2
Tipo de enfriamiento:	Actief
Soporte RAID:	Ja
Tamaño del disco de almacenamiento:	- "
Interfaces de unidad de almacenamiento compatibles:	Serial ATA, Serial Attached SCSI (SAS)
Tipos de incursión:	0, 1,3, 5,6, 10, 30, 50, 60, JBOD
Número de unidades de almacenamiento admitidas:	6
Tamaños de unidades de almacenamiento admitidos:	2.5, 3.5 "
Tipo-de-visualización:	LCD
Tipos de unidades de almacenamiento compatibles:	HDD & SSD