TAIDEN HCS-8316SDI Manual de Usario

TAIDEN servidor HCS-8316SDI

Lee a continuación 📖 el manual en español para TAIDEN HCS-8316SDI (15 páginas) en la categoría servidor. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/15
HCS-8316 Series Encoder
Excellent solutions for conferences
Installation and Operation Manual
V 1.0
I
Remark:
All rights reserved for translation, reprint or reproduction
Contents may change without prior announcement
All technical specifications are guideline data and not guaranteed features
Taiden Co., Ltd. is not responsible for any damage caused by improper use of this manual
The equipment must be connected to earth!
This product conforms to the rules of the European directive 2004/108/EC.
If any detailed information needed, please contact your local agent or TAIDEN service center in your region.
Any feedback, advice and suggestion about the products is appreciated
TAIDEN is the registered trademark of TAIDEN Co., Ltd.
Important Safety Instruction
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
6. The MAINS plug serving as a disconnection device,
should be easy to operate.
7. The apparatus should be connected to the MAINS
socket-outlet with protective earth.
8. Clean only with dry cloth.
9. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
10. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
11. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade and the third prong are provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
II
12. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
13. Only use attachments/accessories specified by the
manufacturer.
14. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
15. Unplug this apparatus during lightning storms or
when unused for long periods of time.
16. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
17. Do not place the equipment on any uneven or
unstable stand; original product package or
appropriate package should be used to avoid damage
caused by strong impacts during transportation.
18. Power supply cords:
AC 100 V-120 V 60 Hz or AC 220 V-240 V 50 Hz
19. For service, please contact the nearest TAIDEN
Service Center.
20. All TAIDEN products are guaranteed for definite time
(see the WARRANTY CARD for details) excluding the
following cases:
A. All damage or malfunction caused by human
negligence;
B. Damage or malfunction caused by improper
operating by operator;
C. Parts damage or loss caused by disassembling
the product by non-authorized personnel.
21. Use ONLY specified connection cable to connect the
system equipment.
22. Upon receipt of the product, please fill out the
Warranty Card enclosed and post it to TAIDEN
Service Center.
CAUTION: To reduce the risk of electric shock,
DO NOT open covers, no user serviceable parts
inside. Refer servicing to qualified service
personnel only.
CAUTION: DO NOT use alcohol, ammonia or
petroleum solvents or abrasive cleaners to
clean the devices.
The lightning flash with an arrowhead symbol, with
an equilateral triangle, is intended to alert the user
to the presence of uninsulated ‘dangerous voltage’
within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

Especificaciones del producto

Marca: TAIDEN
Categoría: servidor
Modelo: HCS-8316SDI

¿Necesitas ayuda?

Si necesitas ayuda con TAIDEN HCS-8316SDI haz una pregunta a continuación y otros usuarios te responderán


servidor TAIDEN Manuales

TAIDEN

TAIDEN HCS-8316SDI Manual de Usario

8 Septiembre 2024

servidor Manuales

Últimos servidor Manuales

Supermicro

Supermicro SBA-4119S-T2N Manual de Usario

27 Octubre 2024
Supermicro

Supermicro A+ Server 1024US-TNR Manual de Usario

27 Octubre 2024
Infortrend

Infortrend GS 1024B Manual de Usario

26 Octubre 2024
Advantech

Advantech EKI-1242 Manual de Usario

26 Octubre 2024
Supermicro

Supermicro SuperServer 2028U-TNRT+ Manual de Usario

26 Octubre 2024
HP

HP ProLiant ML110 G10 Manual de Usario

24 Octubre 2024
HP

HP ProLiant DL385 G2 Manual de Usario

24 Octubre 2024
QNAP

QNAP TVS-663 Manual de Usario

20 Octubre 2024
Gigabyte

Gigabyte R262-ZA2 Manual de Usario

18 Octubre 2024
Gigabyte

Gigabyte G262-ZO0 Manual de Usario

18 Octubre 2024