Technoline WS 6810 Manual de Usario

Technoline Estación meteorológica WS 6810

Lee a continuación 📖 el manual en español para Technoline WS 6810 (1 páginas) en la categoría Estación meteorológica. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/1
SNOOZE
Outdoor Remote
Temperature
Sensor
Battery
Door
E0060
-
E
Instruction Manual
Radio Controlled
LED
Clock with Wireless Indoor
and Outdoor Temperature
I n s e r tt
AC/DC
adaptor plug
Indoor Temperature
HI
-
L0
dimmers
witch
Outdoor
Temperature
\
Insert
3
X
AAA
back up
batteries
lnstallation
Plug the AC/DC adaptor into any 230V European AC household outlet.
Plug the DC jack into the the back of clock. The front of the clock will show
.
Battery Back Up
1.
Slide the battery door at the back case, insert 3 x
AAA
batteries with correct
+
and
-
polarity signs inside the battery compartment.
Replace the battery cover.
2.
When AC power is
off,
the batteries will power the clock to keep track of the time and alarm time.
3.
When only the back
-
up batteries is used, the LED panel is off.
Power Up Reception and Signal Strength Display
1.
Afterplug in AC power, the clock starts to receive DCF signal. lcon
blinks. Display shows
.
2.
When strong DCF signal is detected, display shows with
3
bars
When weak or no DCF signal is detected, display shows with 1
bar
or
.
You will need to place the dock to another area for
better reception, or unplug the AC/DC jack to start over reception again
During reception, the signal strength may move from
1
bar to
2
bars to
3
bars. This is normal since the clock
is detecting DCF signal and other
signals in the air at the same time.
3. If the clock does not catch DCF time signal for
7
minutes, it will go
back to normal time display
.
4.
During reception, press TlME button once will go to normal time display. Press
HR again will return to reception mode and signal strength indication.
Successful reception or failed
reception
loon becomes static on (stop blinking) when reception is successful
loon disappears when reception is failed
Weak
or
no
RC
signa
Is
detected
Successful
Reception
Failed
Reception
Automatic Reception and Manual
Reception
2:00 am. If fails at 2:00 am, it will start again at 3:00 am.
Automatic reception
:
this clock starts reception automatically everyday at : 1:00am. If auto reception fails at 1:00 am, it will start again at
If auto reception fails at 3:00 am still fails,
it
will start reception every
3
hours until it succeed to catch correct DCF time.
Manual reception
:
press HR button once anytime to start manual reception of DCF time signal. The LED time display will go to radio
controlled reception mode
RC
tower
lcon blinking
Strong
DCF signal
detected
I
minute digits
may
start counting
01
02 0 3 60
00
01
02 trying
to
matchwith the correct seconds
of
JJY
signal
To Set
Time
and Alarm Time
After power up, if press TIME button once, time digits go to 0:00am default
start
-
up The clock time). continues to receive signal. The DCF icon is still blinking.
Press HR button once will go back to radio controlled reception mode (as above)
TO SET TlME
Press and hold TlME button and at same the time press HR button once at a time to
set
hour.
Press and hold TlME button and at same the time press MIN button once at a time to minute. set
TO SET ALARM
1
TlME
Slide the Alarm Switch to ALM 1
.
Press and hold ALM button and at the same time press HR button once at a time to set hour.
Press and hold ALM button and at the same time press MIN button once at a time to
set
minute.
TO
SET ALARM
2
TlME
Slide the Alarm Switch to ALM
2.
Press and hold ALM button and at the same time press HR button once at a time to set hour.
Press and hold ALM button and at the same time press MIN button once at a set time to minute.
TO TURN ON/OFF ALARM
1
or/and ALARM
2
To turn on Alarm
1
only, slide the alarm switch to ALM 1
,
ALM 1
LED lights up on upper left
of
the hour digits.
To turn on Alarm
2
only, slide the alarm switch to ALM
2,
ALM
2
LED lights up on lower left of the hour digits.
To turn on both Alarm
1
and
2,
slide the alarm switch to ALM 1
+
2,
both ALM
1
and ALM 2 LED light up.
To in
-
activate both Alarm 1
and
2
permanently, slide to ALM OFF. Both ALM
1
and ALM
2
LED turn off.
TO USE THE SNOOZE ALARM
When time reaches the set ALARM 1
and or /ALARM
2
time, the dock will beep with the ALM
1
andlor ALM
2
LED blinking.
Press the SNOOZE button once, the alarm sound will stop and ALM
1
or ALM
2
LED keep blinking. Alarm will sound again
in
5
minutes.
TO
STOP THE ALARM
When time reaches the set ALARM
1
andlor ALARM
2
time, the dock will beep with the ALM 1
and or /ALM
2
LED blinking.
Press and hold the SNOOZE button for
2
seconds, the alarm sound will stop ALM and 1
or ALM
2
LED becomes static.
Alarm
1
andlor Alarm 2 will sound again same time next day.
TO TURN OFF ALARM 1
AND/OR ALARM
2
PERMANENTLY
Slide the alarm switch to ALM OFF. Alarm sound will stop and both ALM
1
and ALM
2
LED'S turn off.
TO
SET SNOOZE DURATION (from
5
to
60
minutes)
Press and hold and time display SNOOZE will show
"
05
"
(default duration) and then snooze press MINUTE button to set your
desired snooze duration.
TO
READ MAXIMUM
-
MINUMUM INDOOR
-
OUTDOOR TEMPERATURES
Simply press the button to view the maximum indoor and outdoor temperatures. Press CLEAR to reset the Max readings.
The readout will now appear as
-
-
and will start to record the maximums again.
Then press the button to view the minimum indoor and outdoor temperatures. Press CLEAR reset the to Min readings.
The readout will now appear as
-
-
and will start to record the minimums again.
IF YOU LOSE THE OUTDOOR TEMPERATURE
When the outdoor temperature digits show
'---'l,
the wireless transmission is either interrupted or lost. Press the RESET button
located on the back of the outdoortransmitter. If you continue to lose outdoor temperature the display, try placing the transmitter in a different
location until you have smooth transmission
of
temperature data.
TROUBLE SHOOTING
Press the RESET button on the back of the base thermometer and then press RESET button located on the back of the outdoor transmitter.
Once you do this, your
clock
will be reset to default setting and needs to
be
up
-
dated by DCF time signal again.??
TO
USE THE HI
-
L0 DIMMER SWITCH
Simply slide the LO
-
HI DIMMER at switch the back of the clock to adjust the LED brightness to a level comfortable to you in the dark.
CARE OF YOUR CLOCK
1.
.
Do not expose your clock to extreme temperatures, water or direct sunlight.
2. Avoid contact with any corrosive materials
3.
Do not subject the clock to excessive force, dust humidity or
4.
Do not inner back case tamper open the or
with
any components of this dock
5.
Do not plug in any adaptor other AC/DC wi thincorrect specifications or voltage

Especificaciones del producto

Marca: Technoline
Categoría: Estación meteorológica
Modelo: WS 6810

¿Necesitas ayuda?

Si necesitas ayuda con Technoline WS 6810 haz una pregunta a continuación y otros usuarios te responderán


Estación meteorológica Technoline Manuales

Technoline

Technoline WS 9257 Manual de Usario

15 Septiembre 2024
Technoline

Technoline WS 9121 Manual de Usario

12 Septiembre 2024
Technoline

Technoline WS 6810 Manual de Usario

10 Septiembre 2024
Technoline

Technoline WS 6502 Manual de Usario

1 Agosto 2024
Technoline

Technoline WS 9310 Manual de Usario

24 Julio 2024
Technoline

Technoline WS 6825 Manual de Usario

20 Julio 2024
Technoline

Technoline WS 6762 Manual de Usario

16 Julio 2024

Estación meteorológica Manuales

Últimos Estación meteorológica Manuales

Ascot

Ascot GT-WS-07s Manual de Usario

20 Octubre 2024
Ventus

Ventus K0382 Manual de Usario

18 Octubre 2024
Hyundai

Hyundai WSP 3080 Manual de Usario

15 Octubre 2024
La Crosse Technology

La Crosse Technology V61 Manual de Usario

8 Octubre 2024
Cresta

Cresta WX580M Manual de Usario

6 Octubre 2024
Sencor

Sencor SWS 65 Manual de Usario

5 Octubre 2024
Irox

Irox JKR-1 Manual de Usario

5 Octubre 2024
TFA

TFA 30.5002 Manual de Usario

5 Octubre 2024
TFA

TFA WeatherHub 30.3306.02 Manual de Usario

4 Octubre 2024
Jung

Jung WS10R Manual de Usario

4 Octubre 2024