Tesy CN 051 050 EI CLOUD W Manual de Usario

Tesy No categorizado CN 051 050 EI CLOUD W

Lee a continuación 📖 el manual en español para Tesy CN 051 050 EI CLOUD W (64 páginas) en la categoría No categorizado. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/64

www.tesy.com

is a registered trade mark of Tesy ltd.

CN 051 EI [CLOUD] [AS] W

230V~ 50Hz 500/1000/1500/2000/2500/3000W

206429-v1.0

ENELECTRIC PANEL HEATER 2-11

Operation and Storage Manual of Panel Heater

BGЕЛЕКТРИЧЕСКИ КОНВЕКТОР 12-22

Инструкция за експлоатация и съхранение на панелен конвектор

ROCONVECTOR ELECTRIC 23-32

Instrucţiuni de utilizare şi depozitare а convectorului de panou

RSЕЛЕКТРИЧНИ КОНВЕКТОР 33-41

Упутства за употребу и складиштење панелног конвектора

GRΗΛΕΚΤΡΙΚΟΣ ΘΕΡΜΟΠΟΜΠΟΣ/CONVECTOR 42-52

Οδηγίες χρήσης και αποθήκευσης Πάνελ - Θερμοπομπού

HRELEKTRIČNI KONVEKTOR 53-62

Upute za uporabu i pohranu panelnog konvektora

2 Operation and Storage Manual of Panel Heater

IMPORTANT SAFETY MEASURES AND INSTRUCTIONS:

WARNING!

• Please read this manual before operating the appliance and keep it at a

safe place for future reference. In case the appliance is obtained by a new

owner, it should be transferred together with its manual.

• Children under 3 years of age should be kept away from the CAUTION:

appliance unless they are under constant supervision.

Children from 3 to 8 years of age are allowed to operate the on/oﬀ button

ONLY, provided that the appliance is installed and ready for operation and

such children have been supervised and instructed in safe operation of the

appliance and they understand all related risks.

Children from 3 to 8 years of age MUST NOT: connect the plug to power

sockets, make adjustments, clean it or carry out user maintenance

operations.

This appliance can be used by children older than 8 years of age and

by people with reduced physical, sensor and mental capabilities, as well

as by people with insuﬃcient experience and knowledge provided they

are supervised or instructed in safe operation of the appliance and

understand the related risks. Children should not be allowed to play with

the appliance. Cleaning and user maintenance operations must not be

carried out by children without supervision.

• Some of the appliance parts may get very hot during operation CAUTION:

and thus cause burns to users. In case there are children and vulnerable

people in the room, special attention should be paid.

•WARNING: Do not cover the appliance in order to

prevent overheating!

• The appliance must not be placed right under a socket box!

• If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualiﬁed persons in order to avoid a hazard.

• Before connecting the appliance to the mains, check if the voltage

indicated on its technical plate corresponds to the voltage of the

electricity, supplied to your house.

• This appliance shall be used only for the purpose it has been designed

and intended for, i.e. heating of domestic premises. The appliance is not

intended for commercial/industrial application. Every other use is to be

considered improper, and therefore dangerous. The manufacturer doesn’t

bear responsibility for damages arising from improper and irrational use.

Non-adherence to these instructions would render the warranty invalid!

• Do not leave your home while the heater is operating: make sure that the

power switch is in OFF position (panel heaters with mechanical control).

• Keep inﬂammable objects, such as furniture, pillows, bedding, paper,

clothes, curtains etc. at a safe distance of at least 100 cm away from the

panel heater.

• Do not operate the appliance in areas of use or storage of combustible

substances. Do not operate the appliance in areas of combustible media

(for example in close proximity to inﬂammable gases or aerosols) – there is

great risk of explosion and ﬁre!

• Do not insert and do not allow foreign objects to enter the ventilation

openings (inlet and outlet) because this will cause electric shock, ﬁre or will

damage the appliance.

• The appliance is not suitable for animal breeding. The panel heater is

intended for domestic/indoor operation only.

• When positioning the appliance, do not cover the safety grilles; do not

hamper the incoming and outgoing air ﬂow. All objects must be at a safe

distance of at least 1 meter away from the appliance front and sides.

• The most common reason for overheating is dust and ﬂuﬀ deposits in the

appliance. Clean the ventilation openings on a regular basis with a vacuum

cleaner, but before that it is very important to disconnect the heater from

the mains.

• Never touch the appliance with wet or moist hands – there is risk for your life!

• The power socket should be accessible all the time in order to disconnect

the power plug when needed as fast as possible! Never pull the power

cord or the appliance itself in order to disconnect it from the mains.

• PAY ATTENTION! Outgoing air gets heated during appliance operation (up

to more than 100°С).

• If you decide to stop using an appliance of this kind, it is recommended to make

it unusable by cutting its power cord after you have disconnected it from the

mains. It is advisable all possible risks related to the appliance to be secured,

especially in relation to children that may play with out-of-use appliances.

• Warning: Do not use this appliance with a programmer, counter or any

other mechanism which could automatically turn on the heater – if the

appliance is covered or positioned incorrectly there is a risk of ﬁre.

• Position the power cord in such a way that it does not obstruct the free

movement of people and cannot be stepped on! Use only approved extension

cords, which are suitable for this appliance, i.e. they have a compliance sign!

• Never move the appliance by pulling its power cord; do not use the power

cord for carrying other objects!

• Do not bend the power cord and do not pull it against sharp edges; do not

place the power cord on hot surfaces or open ﬁre!

• The scattered UVA light emitted by the device is harmless to the eyes.

Looking directly at UVA light is not recommended.

PACKING

• After unpacking the appliance, check if its contents are intact and if it has

not been damaged during transportation! In case a damage or incomplete

delivery is found, contact your authorized retailer!

• Do not dispose of the original packing box! It could be used for

storage and transportation purposes in order to avoid damages during

transportation!

• Disposal of packing material should be done in the appropriate way!

Children must be prevented from playing with polyethylene bags!

INSTALLATION INSTRUCTIONS

• This panel heater is designed to be used indoors, mounted on a wall.

Important: In premises bigger than 45 m

3, it is recommended to use a

combination of 2 or more panel heaters.

• Do not position the panel heater under a power socket or electricity

connection box.

• DO NOT install/operate the panel heater:

1. in places where a draught is present, which could inﬂuence the

control settings;

2. right under a power socket;

3. in “Volume 1” for bathrooms;

4. in “Volume 2” if the control board can be reached by a person who is in

a shower or in a bathtub;

• for the wall-mounting of the panel heater, only the wall braces must be

used which are delivered together with the appliance. When installing the

panel heater, minimum safe distances must be observed

• First of all, remove the wall braces from the back of the appliance body.

Unscrew the two screws which are positioned at the upper part of the two

vertical bars of the wall braces. Then pull the upper part of the bar by pressing

strongly the two upper parts which are inserted in the back of the body.

Operation and Storage Manual of Panel Heater 3English

• Slide down the wall brace in order to detach it from the back of the body.

• Attach ﬁrmly the wall brace onto a wall through the four screw holes.

• Lift the panel heater up to almost vertical position and insert the two lower

protruding parts of the braces into the two lower openings of the back

cover of the panel heater. Then lift the panel heater and insert the two upper

protruding parts of the wall braces into the two upper openings of the back

cover of the heater. Finally, put the two screws back to their places and

tighten them in order to install the panel heater ﬁrmly to the wall.

BATHROOM OPERATION

• The panel heater must be installed in accordance with the normal trade

practices and in compliance with the national legislation (EU electricity

directives and regulations concerning special installations and places

of operation including bathrooms, shower cabins HD60364-7-701(IEC

60364-7-701:2006)).

• In case this panel heater is to be used in a bathroom or other similar room,

the following installation requirements must be observed: the panel

heater is with IP24 protection (water drops protection). Hence it can be

installed in “Volume 2” (see the diagram below) in order to avoid the risk of

the control board (power switch and thermo regulator) being reached by

a person who is in a shower or a bathtub. The minimum distance between

the appliance and a water source should be not less than 1 meter and it

is compulsory the appliance to be wall-mounted! If you do not feel sure

about the installation of this panel heater in a bathroom, we recommend

you to consult a professional electrician.

Note: If the above-mentioned instructions cannot be implemented, it is

recommended to install the appliance in “VOLUME 3”.

• In wet premises the power source must be installed at a height of at least

25 cm above the ﬂoor (bathrooms and kitchens).

• The installation must be equipped with a safety fuse, and the distance

between the fuse contacts in disconnected condition should be at least 3 mm.

Thank you for choosing CN051 panel heater. This is a product providing

heating in winter depending on the consumers’ needs for comfortable

room temperature. If operated and taken care of properly in accordance

with these instructions, the appliance will provide you with many years of

useful operation.

OPERATION INSTRUCTIONS

• Hold for 1.5 sec button for OFF or ON the heater.ON/OFF

• – push the ON/OFF button until 1 secondsStep back

• - push the Mode button until 1 secondsQuick menu/Conﬁrmation

• - hold the Mode button over 3 secondsFull menu

1. Predeﬁned functions:

Comfort mode ; Eco mode ; Sleep mode

1.1. Comfort mode - with On/Oﬀ option - allows the user to set a desired

temperature when being at home. After once set it and the function is

switched On, the appliance will keep the same room temperature each time of

usage. This temperature to be set at 23°C by default.

Activation of „Comfort mode“ :

- Push the button “Mode” for 3 sec and select “Comfort mode” by

pushing any of the buttons: and and conﬁrm with “Mode” button

. After that you should set the comfort temperature

– by pushing any of the buttons or set the desired temperature.

Conﬁrm with “Mode” button .

- The “Comfort” mode is activated.

Deactivation of „Comfort mode“ :

- To deactivate the “Comfort” mode press “On/Oﬀ” button for 1.5 sec. Then

the heater turns oﬀ. The display will continue showing the set temperature. Or

press “Mode” button to choose diﬀerent mode.

Visualization on Display in “Comfort” mode settings :

- Set temperature

The display shows “Comfort” in the top and the set temperature

When the convector is in „Heating mode„ ,sign „sun„ appears on the

display.

1.2. Eco mode - with On/Oﬀ option - allows the user to set a desired

temperature when being out of home. After once set it and the function is

switched On, the appliance will keep the same room temperature each time of

usage. This temperature will be set at 18°C by default. User could also set the

time when the appliance to switch to Comfort mode.

Activation of „Eco„ mode

Push the button “Mode” for 3 sec and select “Eco” mode by pushing

any of the buttons: or and conﬁrm with “Mode” button . After

that you should set the temperature – by pushing any of the buttons or

set the desired temperature. Conﬁrm with “Mode” button .

If you want you can set the clock time:

-Select by pushing any of the buttons: or reach actual hour time.

Conﬁrm with “Mode” button .

- The minute icon is ﬂashing and by pushing any of the buttons: or

reach actual minute time. Conﬁrm with “Mode” button (range 00.00-

24.00).

Especificaciones del producto

Marca:	Tesy
Categoría:	No categorizado
Modelo:	CN 051 050 EI CLOUD W
Memoria interna:	16 GB
Tipo de memoria interna:	DDR3
ETC:	Nee
Memoria de velocidad de reloj:	1600 MHz
Factor de forma de memoria:	UDIMM
Componente para:	Pc/server
Diseño de memoria (módulos x tamaño):	4 x 4 GB
Tipo de memoria buffer:	Unregistered (unbuffered)
voltaje de la memoria:	1.5 V
Latencia CAS:	9
Configuración del módulo:	512M x 64