Tissot G10-212 Manual de Usario

Tissot Mirar G10-212

Lee a continuación 📖 el manual en español para Tissot G10-212 (7 páginas) en la categoría Mirar. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

www.tis s o t .ch 1 5 8 _E N / 1 0.15

1/7

G10-212

User’s Manual

SWI S

MADE

TISSOT

1853

45 15

324

Hour hand

Minute hand

Seconds hand (direct-drive)

Calendar

30-minute counter

60-second counter

1/10 second counter

* Models with a screw-down crown:

IA Neutral position (unscrewed, not pulled out)

IB Initial position (screwed down, not pulled out)

83-position crown

I Neutral position (screwed down*, not pulled out)

II Synchronisation and date setting position

(unscrewed*, half pulled out)

III Time-setting position (unscrewed*, fully pulled out)

Display and functions

Chronograph model Football model

Hour hand

Minute hand

Seconds hand (direct-drive)

Calendar

45-minute counter

60-second counter

Match phase counter

83-position crown

I Neutral position

II Date-setting position

III Time-setting position

G10-212

www.tis s o t .ch 15 8 _EN / 1 0.15

2/7

Acknowledgements

Thank you for choosing a chronograph from TISSOT®, a Swiss brand among the most highly renowned in the world. Meticulously designed, using only the

highest quality materials and components, your chronograph is protected against shock loads, variations in temperature, water and dust.

This user manual applies to TISSOT® quartz chronographs with a G10.212 movement, and is divided into several model-specific chapters.

The Chronograph model enables you to measure events lasting up to 30 minutes, and offers you the following functions:

• Standard chronograph function (START/STOP);

• “ADD” function (partial times);

• “SPLIT” function (intermediate times).

The Football model enables you to time football matches, and offers you the following functions:

• Half counter;

• Added time counter;

• Extra time counter.

To ensure that your chronograph operates with perfect precision for many years to come, we advise you to pay careful attention to the advice given in this

user manual.

Chronograph model - Use

Model with a screw-down crown

To ensure even better water resistance, certain models are fitted with a screw-down crown. Before setting the time or date, you must first unscrew the

crown to position , so that you can pull it out to position or IB II III.

Important! After every operation, the crown must be screwed back down to maintain the water-resistance of the watch.

Setting the time

• Pull the crown out to position , and turn it forward or backward to set the desired time.3

• Synchronise the small seconds hand at 6 o’clock with an official time signal (radio/TV/Internet), by pulling the crown out to position ; the hand will stop. 3

Once the time is synchronised, push the crown back into position 1.

Winding

Quartz watches do not need to be wound.

Setting the date

• Pull the crown out to position and turn it anticlockwise until the desired date is displayed.II

Simple timing

The «simple timing» function enables you to measure isolated events.

START, press A

STOP, press A

Time readout (as per example opposite):

- 5 minutes,

- 57 seconds,

- 7/10ths of a second

Reset, press B

START, press A

STOP Readout, press A

RESTART, press A

STOP Readout, press A

RESTART, press A

STOP Readout, press A

Reset counters, press B

NB: before each timing operation, the chronograph hands must be at their start points. If necessary, refer to the paragraph.“Resetting the counters”

Note: I all the timing functions are available with the crown pressed into position .

Tachymeter : (depending on model)

The tachymeter allows you to measure the speed of an object moving at a constant speed. Start the chronograph and then stop it when you have travelled a

distance of 1 km; the chronograph hand will be pointing to a number on the tachymeter scale indicating the speed in km/h.

ADD function (partial times)

The “ADD” function enables you to measure consecutive events without having to reset in between. Each time is added to the previous total.

20 10

40 20

20 10

40 20

G10-212

www.tis s o t .ch 15 8 _EN / 1 0.15

3/7

START, press A

SPLIT 1, press B

Time 2 readout

- 5 minutes,

- 4 seconds,

- 6/10ths of a second

RESTART, press B

SPLIT 2, press B

Time 2 readout

- 15 minutes,

- 36 seconds,

- 8/10ths of a second

RESTART, press B

STOP, press A

Final time readout (cumulative time)

- 25 minutes,

- 18 seconds,

- 4/10ths of a second

Reset counters, press B

SPLIT-TIME function (intermediate times)

The SPLIT-TIME function enables you to stop the hands to read an intermediate time, without interrupting the timing. When you restart, the chronograph

hands “catch up” to the ongoing elapsed time.

20 10

40 20

20 10

40 20

20 10

40 20

Chronograph model - Settings

Resetting the counters