TMI VD34 Manual de Usario

TMI Mirar VD34

Lee a continuación 📖 el manual en español para TMI VD34 (21 páginas) en la categoría Mirar. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/21

English

Hour hand

Minute hand

Second hand

24 hour hand

Date window

Crown at :

1st click

2nd click

Dual hour hand

Dual minute hand

Crown at :

Normal position

2nd click (VD33)

1st click (VD34)

Note : The dual minute hand rotates one revolution at every quarter (15 minutes). There is no problem as

it is typical function of the movement.

* After setting or changing the battery, before setting the time, check if the dual hour hand and dual

minute hand are at the "0" (12 o'clock) position.

* If either the dual hour hand or the dual minute hand is not at the "0" position, reset it/them following

the procedure shown below :

1) Pull out the crown to second click (VD33) / first click (VD34)

2) Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the buttons.

* Dual minute hand moves and returns to where it was

Operation Manual

VD33 / VD34

DISPLAY AND CROWN/ BUTTON OPERATION

VD33

VD34

[ VD33 ]

[ VD34 ]

Dual Time

9H subdial hand (12 hr)

Time setting

(by pushing ) BUTTONS

Button A : -1 hour / push

Button B : +1 hour / push

Button A : -1 minute / push

Button B : +1 minute / push

Time Indication

6H subdial hand

Local Time

Time Indication

Center hour hand

Center minute hand

Center second hand

3H subdial hand

Time setting

(by turning )CROWN

Date setting

Time setting

ADJUSTING DUAL TIME HANDS POSITION

dual minute

hand

hour hand

second hand

minute hand

24 hour hand

Button A

Button B

Crown at normal

position

1st click

dual hour

hand (12 hr)

hour hand

second hand

minute hand

24 hour hand

Button A

Button B

Crown at normal

position

1st click

2nd click

dual hour

hand (12 hr)

dual minute

hand

date window

English

3) Press button A or B to reset the dual time hands to "0" position.

* Button A : hands move counter-clockwise

Button B : hands move clockwise

* The dual hour hand moves correspondingly with the dual minute hand

* The dual hour hand and dual minute hand move quickly if the respective buttons are kept pressed.

4) Push the crown back in the normal position.

Note : The dual minute hand rotates one revolution at every quarter (15 minutes). There is no problem as

it is typical function of the movement.

1) Pull out the crown to second click (VD33) / first click (VD34) when the second hand is at the 12 o'clock

position.

2) Turn the crown to set the hour and minute hands. (make sure 24 hour hand is set correctly).

3) Push the crown back in the normal position in accordance with a time signal.

Note :

* The 24 hour hand moves correspondingly with the hour hand.

* The moment the date changes is midnight. When setting the hour hand, make sure that AM/PM is

correctly set by using the 24 hour hand as an AM/PM indicator.

* When moving to a country or area in a different time zone, adjust the dual hour hand to that

country / area :

[ Quick set the dual time ]

1) Crown at normal position.

2) Adjust the time by pressing the button A or B.

Button A : - 1 hour / push

Button B : +1 hour / push

[ Precise adjustment of the dual time ]

1) Pull out the crown to second click (VD33) / first click (VD34) when the second hand is at the

12 o'clock position.

2) Adjust the time by pressing the button A or B.

Button A : -1 minute / push

Button B : +1 minute / push

3) Push the crown back in the normal position in accordance with a time signal.

Note : The dual minute hand rotates one revolution at every quarter (15 minutes). There is no problem as

it is typical function of the movement.

DUAL TIME SETTING

Operation Manual

VD33 / VD34

LOCAL TIME SETTING

English

* Before setting the date, be sure to set the time.

1) Pull out the crown to the first click.

2) Turn the crown clockwise until the desired date appears.

3) Push the crown back in the normal position.

Note :

* Do not set the date during any time between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not

change properly. If it is necessary to set the date during that time period, first change the time to any

time outside it, set the date and then reset the correct time.

DATE SETTING (VD33 only)

Operation Manual

VD33 / VD34

Especificaciones del producto

Marca:	TMI
Categoría:	Mirar
Modelo:	VD34
Color del producto:	Aluminium
Peso.:	80 g
Ancho:	38 mm
Profundidad:	108 mm
Altura:	14 mm
Manual de usuario:	Ja
Tipo de conector USB:	USB Type-C
Tipo de fuente de energía:	USB
Cables suministrados:	USB Type-C naar USB Type-C
Número de conexiones USB:	1
versión USB:	3.2 Gen 2 (3.1 Gen 2)
Material:	Aluminium
Soporta Windows:	Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP
conexión USB:	Ja
Compatible con Linux:	Ja
Tipo de caso:	Hoes
Incluyendo tornillos:	Ja
Tamaño del disco de almacenamiento:	M.2 "
Interfaces de unidad de almacenamiento compatibles:	M.2
Tamaños de disco duro admitidos:	M.2 "
Ratio de transferencia:	10 Gbit/s
Número de unidades de almacenamiento admitidas:	1
Código del Sistema Armonizado (SA):	84733080
Conector USB de género:	Vrouwelijk
Incluye destornillador:	Ja