Tor Rey LSQ-40L Manual de Usario

Tor Rey Libra LSQ-40L

Lee a continuación 📖 el manual en español para Tor Rey LSQ-40L (24 páginas) en la categoría Libra. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
LSQ-40L
LABEL PRINTING SCALE
QUICK START
MANUAL
REV 1.0
PAGE 1
INDEX
Before you begin…………………………………………………………2
Cleaning the scale
Requirements for using a computer to program
Setting up scale for first use………………………………………………..4
Testing printer
Printing your first label……………………………………………………..5
Setting up the network…………………………………………………..6
Connecting the devices
Installing the software
Configuring you computer
Configuring your scale(s)…………………………………………………..7
Starting up the software…………………………………………………8
Adding scales to the network
Configuring general information…………………………………………..9
Adding products………………………………………………………..10
Moving products to/from scale……………………………………………11
Access Direct
General configuration…………………………………………………..12
Bar code setup
Printed text on labels………………………………………………...13
Headlines
Passwords
Programming using the keyboards…………………………………………14
Entering store information
Edit scrolling message……………………………………………….…15
Configuration………………………………………………………….16
Setting up label print……………………………………………………17
Setting up bar code
Placing text on label………………………………………………….18
Set up text on label……………………………………………………...…19
Add plu’s…………………………………………………………………..20
Key assignation
Troubleshooting……………………………………………………………22
Page 2
BEFORE YOU BEGIN
Please read this section carefully. The following has some important safeguards to
prevent damage or failure of your scale.
CLEANING THE SCALE:
1). You may use stainless cleaner or mild soap to wipe down the metal areas of the
scale. The keyboards and display should be wiped down with a damp cloth only.
While the keyboards and display are reasonably sealed, do not allow liquids to get
between the plastic surfaces and the metal.
2). Use only the supplied cleaning kit to clean the print head. Do not use sharp
objects around the print head or the pinch roller below it. Damaging these parts will
cause your label printouts to be unreadable or you may even cause internal damage
to the scale.
3). Do not immerse the power supply in water. This will cause possible electrical
shock and failure of the adapter. Unplug adapter from power and wipe down with a
damp cloth. Do not spray the adapter with cleaning fluids.
4). Keep the print cartridge area clean of any food or other debris. If contaminants
are picked up by the labels and brought across the print head, it can cause labels to
print poorly. This can also damage the print head.
COMMUNICATIONS WITH THE SCALE:
If you are going to program your scale using a personal computer, here are a few
things you will need.
1). You will need to purchase a network adapter (hub) and two (2) category 5 cables.
These can be purchased from electronics or department stores that sell computer
equipment. A network adapter allows you to plug your computer and scale(s) into
one hub. NOTE: You cannot plug the scale directly into your computer. Being your
scale is actually a computer, all computers that communicate with each other
require a network adapter to control data flow between machines.

Especificaciones del producto

Marca: Tor Rey
Categoría: Libra
Modelo: LSQ-40L

¿Necesitas ayuda?

Si necesitas ayuda con Tor Rey LSQ-40L haz una pregunta a continuación y otros usuarios te responderán




Libra Tor Rey Manuales

Libra Manuales

Últimos Libra Manuales