TP Link Tapo S200D Manual de Usario

TP Link Casa inteligente Tapo S200D

Lee a continuación 📖 el manual en español para TP Link Tapo S200D (2 páginas) en la categoría Casa inteligente. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
Product Introduction Wire Your Switch
Tapo smart dimmer switch turns on and
dims the lights automatically, saving you
eort and electricity bills.
Connect the wires to the smart dimmer
switch as shown below.
4
Disconnect the wires from the old switch.
Ground: Usually green or copper.
Neutral: Usually white and not connected to the dumb switch.
Line: Usually black and coming from the circuit breaker.
Load: Usually black. One end is connected to the light.
If you are unsure, consult a qualied electrician.
Turn o the circuit breaker. Then remove
the old wallplate of the wall switch and
label the wires.Ground and Neutral
1
2
Identify and Line Load wires.
3Line up the switch with the mounting
holes. Secure it with screws.
5Attach the wallplate and turn on the
circuit breaker. Then the wiring is
nished.
6
Flip the page over to complete setup.
1) Turn on the circuit breaker. Use a voltage detector
to identify the energized wire (Line wire).
2) and Turn othe circuit breaker. Label the Line Load
wires.
Take care to avoid electric shocks.
Load wireLine wire Power
Source
To Light
Button Explanations
Smart Wi-Fi Dimmer Switch
Quick Start Guide
©2022 TP-Link 7106509851 REV1.0.0
Specications
Rating: 120 V~ 60 Hz
Load: 300 W Incandescent, 150 W LED
Operation temperature: 0~40 ℃
Method of mounting included: Independently mounted
(Vertically position only);
Operating control, Type 1 action
Pollution Degree 2, Rated Impulse Voltage 2500 V
Software Class A, NEMA Type 1.Y
*Images may dier from your actual product.
Restart
Reset
Press and hold for about 5s to reset
Wi-Fi while keeping other settings.
Press to restart your switch.
Decrease or increase the brightness.
Press and hold for about 10s to restore
your switch to factory default settings.
/
Set Up Your Switch Appearance
STEP 2 SET UP
Tap the button in the app. Select Switches
and then your model. Follow the step-by-step
app instructions to set up your smart switch.
DOWNLOAD APP
Get the Tapo app from the App Store or
Google Play.
STE 1P
Before installing, servicing or removing the switch, read and follow all safety
precautions including the following:
• CAUTION – Risk of Electric Shock – More than one disconnect switch may
be required to de-energize the equipment before servicing. A circuit
breaker which disconnects the Line and Neutral conductor simultaneously
is suitable. Ensure power is o at the circuit breaker before removing or
installing any switch. Use a non-contact voltage tester to ensure the power
is o.
• The Smart Switch must be installed and used in accordance with the
National Electric Code (NEC) or your local electrical code. If you are
unfamiliar with these codes and requirements, or are uncomfortable
performing the installation, consult a qualied electrician.
• Do not install the Smart Switch with wet hands or when standing on wet or
damp surfaces.
• Install only in a suitable UL Listed outlet box (suitable dimensions: H > 2.95
in./75 mm, W > 1.81 in./46 mm, D > 2 in./51 mm).
• Tighten terminal screws to 13 lbf-in.
On/O
Button
Decrease/Increase
Brightness
Restart
LED
Reset
Brightness
Indicators
Need some help?
?
Visit www.tp-link.com/support
for technical support, user guides, FAQs,
warranty and more information.
Safety Notice
OR
Haute tension. Débrancher l'alimentation électrique avant
d'utiliser
High Voltage-Disconnect power supply before servicing
CAUTION
MISE EN GARDE
LED Status
Starting up; disconnected
from cloud.
Solid amber
Blinking amber
Blinking green
White
Solid red
Stay green for 30s
Blinking amber & green
Connecting to Wi-Fi.
Ready for setup.
Device resetting.
Light fixture is off.
Disconnected from Wi-Fi.
Connected to Wi-Fi.
Blinking green slowly Firmware upgrading.

Especificaciones del producto

Marca: TP Link
Categoría: Casa inteligente
Modelo: Tapo S200D

¿Necesitas ayuda?

Si necesitas ayuda con TP Link Tapo S200D haz una pregunta a continuación y otros usuarios te responderán


Casa inteligente TP Link Manuales

TP Link

TP Link Kasa EP40 Manual de Usario

14 Septiembre 2024
TP Link

TP Link Tapo T300 Manual de Usario

11 Septiembre 2024
TP Link

TP Link Tapo P300 Manual de Usario

11 Septiembre 2024
TP Link

TP Link Kasa KL40010 Manual de Usario

9 Septiembre 2024
TP Link

TP Link Tapo L920 Manual de Usario

9 Septiembre 2024
TP Link

TP Link Kasa EP25 Manual de Usario

9 Septiembre 2024
TP Link

TP Link Kasa KP125M Manual de Usario

3 Septiembre 2024
TP Link

TP Link Tapo S200D Manual de Usario

30 Agosto 2024
TP Link

TP Link Tapo L520E Manual de Usario

29 Julio 2024
TP Link

TP Link HS105 Manual de Usario

22 Julio 2024

Casa inteligente Manuales

Últimos Casa inteligente Manuales

Brilliant

Brilliant Nexus Home Ultimate 21465 Manual de Usario

27 Octubre 2024
D-Link

D-Link DCS-8010 Manual de Usario

20 Octubre 2024
Niko

Niko 350-20071 Manual de Usario

18 Octubre 2024
Qnect

Qnect QN-WP01 - 414000005 Manual de Usario

16 Octubre 2024
Qnect

Qnect QN-WP04 - 414000001 Manual de Usario

16 Octubre 2024
Elro

Elro AB600S-2 Manual de Usario

13 Octubre 2024
Tenda

Tenda SP15 Manual de Usario

9 Octubre 2024
Eufy

Eufy Lumi Plug-in Night Light Manual de Usario

6 Octubre 2024
ETiger

ETiger ES-D4A Manual de Usario

3 Octubre 2024
Netgear

Netgear Orbi RBS50Y Manual de Usario

2 Octubre 2024