Troy-Bilt TB4920CC Manual de Usario

Troy-Bilt máquina de aserrar TB4920CC

Lee a continuación 📖 el manual en español para Troy-Bilt TB4920CC (69 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/69

Operator’s Manual

P/N 9096-31B201 (5/04)

PRINTED IN TAIWAN

SAVE THESE INSTRUCTIONS DO NOT THROW AWAY

WARNING • PLEASE READ

Beware of kickback. Hold chain saw firmly with both hands when using. For your own safety, please read and follow the

safety precautions in this manual before attempting to operate your chain saw. Improper use can cause serious injury.

This product has been tested at a computed kickback angle (CKA) and conforms to ANSI B175.1-2000,

Annex C. CAN/CSA-Z62.1-03

2-Cycle Gas Chainsaws

Model TB4620CC

Model TB4920CC

INTRODUCTION

Copy the serial number

here:

THANK YOU

Thank you for buying this quality product. This modern

outdoor power tool will provide many hours of useful

service. You will find it to be a great labor-saving device.

This operator’s manual provides you with easy-to-

understand operating instructions. Read the whole

manual and follow all the instructions to keep your new

outdoor power tool in top operating condition.

PRODUCT REFERENCES, ILLUSTRATIONS

AND SPECIFICATIONS

All information, illustrations, and specifications in this

manual are based on the latest product information

available at the time of printing. We reserve the right to

make changes at any time without notice.

Reserved.

SERVICE INFORMATION

Service on this unit both within and after the warranty

period should be performed only by an authorized and

approved service dealer.

For service call to obtain a list of1-800-520-5520

authorized service dealers near you. For more details

about your unit, visit our website at www.troybilt.com.

DO NOT RETURN THE UNIT TO THE RETAILER.

PROOF OF PURCHASE WILL BE REQUIRED FOR

WARRANTY SERVICE.

Before beginning, locate the unit’s model plate. It lists

the model and serial numbers of your unit. Refer to the

sample plate below and copy the information for future

reference.

S/N : ITEM :

MODEL :

Make sure you carefully read and understand this manual

before starting or operating this equipment.

THIS PRODUCT IS COVERED BY ONE OR MORE U.S.

PATENTS. OTHER PATENTS PENDING.

TABLE OF CONTENTS

Service Information . . . . . . . . . . . . . . . . . . . . . . . . .2

Rules for Safe Operation . . . . . . . . . . . . . . . . . . . . .3

Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Oil and Fuel Information . . . . . . . . . . . . . . . . . . . . . .9

Starting/Stopping Instructions . . . . . . . . . . . . . . . .10

Operating Instructions . . . . . . . . . . . . . . . . . . . . . .12

Maintenance and Repair Instructions . . . . . . . . . . .14

Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . .21

Warranty Information . . . . . . . . . . . . . . . . . . . . . . .22

Parts List . . . . . . . . . . . . . . . . . . . .Inside Back Cover

Copy the model and parent

part number here:

SPARK ARRESTOR NOTE

NOTE: For users on U.S. Forest Land and in the

states of California, Maine, Oregon and Washington.

All U.S. Forest Land and the state of California (Public

Resources Codes 4442 and 4443), Oregon and

Washington require, by law that certain internal

combustion engines operated on forest brush and/or

grass-covered areas be equipped with a spark arrestor,

maintained in effective working order, or the engine be

constructed, equipped and maintained for the prevention

of fire. Check with your state or local authorities for

regulations pertaining to these requirements. Failure to

follow these requirements could subject you to liability or

a fine. This unit is factory equipped with a spark

arrestor. If it requires replacement, ask your LOCAL

SERVICE DEALER to install the Spark Arrestor Kit.

CALIFORNIA PROPOSITION 65 WARNING

WARNING

THE ENGINE EXHAUST FROM THIS

PRODUCT CONTAINS CHEMICALS

KNOWN TO THE STATE OF CALIFORNIA

TO CAUSE CANCER, BIRTH DEFECTS

OR OTHER REPRODUCTIVE HARM.

READ ALL INSTRUCTIONS

BEFORE OPERATING

• Read the instructions carefully. Be familiar with the

controls and proper use of the unit.

• Do not operate this unit when tired, ill or under the

influence of alcohol, drugs or medication.

• Only responsible individuals who are familiar with the

instructions may operate the chain saw (no one under

the age of 16). Provide parental supervision at all times.

• Inspect the unit before use. Replace damaged parts.

Check for fuel leaks. Make sure all fasteners are in

place and secure. Replace parts that are cracked,

chipped or damaged in any way.

• Know the controls and know how to stop the chain

saw quickly.

• Carry the chain saw with the engine stopped, the

guide bar and saw chain to the rear, and the muffler

away from your body.

• When transporting your chain saw, use the

appropriate guide-bar scabbard (sheath).

WHILE OPERATING

• Keep all parts of your body away from the chain when

the engine is running.

• Never start or run the unit inside a closed room or

building. Breathing exhaust fumes can kill. Operate

this unit only in a well ventilated outdoor area.

• Wear safety glasses or goggles that are marked as

meeting ANSI Z87.1-1989 standards. Also wear

ear/hearing protection when operating this unit. Wear

a face or dust mask if the operation is dusty. Long

sleeve shirts are recommended.

• Wear heavy, long pants, boots or safety footwear and

protective gloves. Do not wear loose clothing, jewelry,

short pants, sandals or go barefoot. Secure hair above

shoulder level.

• Use the unit only in daylight or good artificial light.

• Avoid accidental starting. Be in the starting position

whenever pulling the starter rope. The operator and

unit must be in a stable position while starting. See

Starting/Stopping Instructions.

• Before you start the engine, make sure that the saw’s

chain is not contacting anything. Do not cut near

electrical cables or power lines.

• Keep all parts of your body away from the chain when

the engine is running.

• Do not start cutting until you have a clear work area,

secure footing, and a planned retreat path from the

falling tree.

RULES FOR SAFE OPERATION

SYMBOL MEANING

The purpose of safety symbols is to attract your

attention to possible dangers. The safety symbols,

and their explanations, deserve your careful attention

and understanding. The safety warnings do not by

themselves eliminate any danger. The instructions or

warnings they give are not substitutes for proper

accident prevention measures.

NOTE: Advises you of information or instructions vital to

the operation or maintenance of the equipment.

SYMBOL MEANING

If correctly used,

the chain saw is a

quick, easy to handle and efficient tool; if

used improperly or without the due

precautions it could become a dangerous

tool. For pleasant and safe work,always

strictly comply with the safety rules that

follow and throughout this manual.

WARNING:

• IMPORTANT SAFETY INSTRUCTIONS •

Failure to obey a

safety warning can

result in injury to yourself and others.

Always follow the safety precautions to

reduce the risk of fire, electric shock and

personal injury.

WARNING:

Failure to obey a

safety warning will

result in serious injury to yourself or to

others. Always follow the safety precautions

to reduce the risk of fire, electric shock and

personal injury.

DANGER:

Failure to obey a

safety warning may

result in property damage or personal injury

to yourself or to others. Always follow the

safety precautions to reduce the risk of fire,

electric shock and personal injury.

CAUTION:

Indicates

danger,

warning or caution. Attention is required in

order to avoid serious personal injury. May

be used in conjunction with other symbols

or pictographs.

SAFETY ALERT:

Read the Operator’s Manual(s) and follow all

warnings and safety instructions.

Failure to do so can result in serious injury to the

operator and/or bystanders.

FOR QUESTIONS, CALL 1-800-520-5520

Especificaciones del producto

Marca:	Troy-Bilt
Categoría:	máquina de aserrar
Modelo:	TB4920CC

¿Necesitas ayuda?

Si necesitas ayuda con Troy-Bilt TB4920CC haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

máquina de aserrar Troy-Bilt Manuales

Troy-Bilt TB4620H XP Manual de Usario

11 Septiembre 2024

Troy-Bilt TB25PS Manual de Usario

11 Septiembre 2024

Troy-Bilt TB4218C XP Manual de Usario

11 Septiembre 2024

Troy-Bilt TB4214 Manual de Usario

11 Septiembre 2024

Troy-Bilt TB4216 Manual de Usario

11 Septiembre 2024

Troy-Bilt TB4216H XP Manual de Usario

11 Septiembre 2024

Troy-Bilt TB4218 Manual de Usario

11 Septiembre 2024

Troy-Bilt TB4920CC Manual de Usario

11 Septiembre 2024

Troy-Bilt TB4216C XP Manual de Usario

11 Septiembre 2024

Troy-Bilt TB4218H XP Manual de Usario

11 Septiembre 2024

máquina de aserrar Manuales

Últimos máquina de aserrar Manuales

Hikoki C 6BU3 Manual de Usario

27 Octubre 2024

Dedra DED7060 Manual de Usario

27 Octubre 2024

Einhell KGS 190 Manual de Usario

27 Octubre 2024

Sun Joe SWJ599E Manual de Usario

27 Octubre 2024

McCulloch CSE1935S Manual de Usario

27 Octubre 2024

Hikoki C10FSB Manual de Usario

27 Octubre 2024

Metabo STA 18 LTX 150 BL Manual de Usario

26 Octubre 2024

Craftsman 917.377662 Manual de Usario

26 Octubre 2024

Maruyama MCV51 Manual de Usario

26 Octubre 2024

Powerplus POWX53300T Manual de Usario

22 Octubre 2024