Ubiquiti Networks PowerBeam M PBE-M5-400 Manual de Usario

Ubiquiti Networks repetidor wifi PowerBeam M PBE-M5-400

Lee a continuación 📖 el manual en español para Ubiquiti Networks PowerBeam M PBE-M5-400 (24 páginas) en la categoría repetidor wifi. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
High-Performance
Integrated InnerFeed
airMAX® Bridge
Models:
PBE-M2-400, PBE-M5-400
Introduction
Thank you for purchasing the Ubiquiti Networks® PowerBeam
.
This Quick Start Guide is designed to guide you through
the installation, and show you how to access the airOS®
Configuration Interface. This Quick Start Guide also includes the
warranty terms and is for use with the PowerBeamM2, model
PBE-M2-400, and the PowerBeamM5, model PBE-M5-400.
If you want to add a radome to enclose the Dish Reflector,
UbiquitiNetworks offers the PowerBeam Radome, 400 mm,
modelPBE-RAD-400 as an optional accessory. Product details are
available on our website at www.ubnt.com/airmax
Package Contents
or
Dish Reflector PBE-M2-400
Antenna Feed
PBE-M5-400
Antenna Feed*
20
10
10
0
Rear Housing Dish Bracket Pole Clamp U-Bolt
High-Performance
Integrated InnerFeed
airMAX ®
Bridge
Models:
PBE-M2-400, PBE-M5-400
Flange Nuts
(M8, Qty. 2)
PoE Adapter
(24V, 0.5A)
Power Cord Quick Start Guide
* The has a thin gray ring around the center of PBE-M5-400 Antenna Feed
the cap to differentiate it from the PBE-M5-300 Antenna Feed.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
is designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.
Hardware Overview
Bottom View
Cable Door
Rear Housing
Technology
Ethernet Port
Release
Button Slot
Dish Bracket
Release Button
Dish
Reflector
Alignment Pins
Reset Button
Antenna Feed
Antenna Feed The PowerBeamM2 is shown; Antenna Feed
however, the PowerBeamM5 has the same layout Antenna Feed
for the , button, and button.Ethernet Port Reset Release
Reset Button To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the PowerBeam is
already poweredon.

Especificaciones del producto

Marca: Ubiquiti Networks
Categoría: repetidor wifi
Modelo: PowerBeam M PBE-M5-400

¿Necesitas ayuda?

Si necesitas ayuda con Ubiquiti Networks PowerBeam M PBE-M5-400 haz una pregunta a continuación y otros usuarios te responderán




repetidor wifi Ubiquiti Networks Manuales

repetidor wifi Manuales

Últimos repetidor wifi Manuales