Uni-T UT568A Manual de Usario

Lee a continuación 📖 el manual en español para Uni-T UT568A (38 páginas) en la categoría Equipo de medición. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/38
2022/
XXXXXXX
12/02 0
Acoustic Imager
UT568A Acoustic Imager User Manual
Warranty and Calibration
Within two years from the purchase date of this product, Uni-Trend will provide
free warranty service for the abnormal or fault caused by product quality
problems. This free warranty service does not apply to problems caused by
improper use and drop.
In case of product failure caused by improper use or accidental drop, Uni-Trend
promises to provide maintenance service at cost price.
The product has been calibrated before leaving the factory. However, in the
process of long term use, it is recommended to send the product to the -
manufacturer every 2 years for calibration, detection and maintenance.
I ntroduction
The acoustic imager supports ultrasonic frequency band. The product uses the
microphone array beamforming technology to acquire the distribution data of
sound sources, and collects videos and images in real time with the HD camera.
By fusing the distribution data of sound sources with videos and images, the
changing sound sources are dynamically shown on the display.
The acoustic imager can quickly detect possible pressurized gas leaks and
vacuum leaks on noisy industrial sites. When the product is used in power
system, it can rapidly identify potential partial discharge fault points.
The acoustic imager's housing is all aluminum alloys. So the product is rugged
and can be used in complex and changeable operating environments.
The product is easy to operate. Most test requirements can be satisfied only by
adjusting its frequency range and dynamic range. The product has image and
video modes for data recording. It can be inserted into a large-capacity TF card
to save and export the test results.
Safety Information
To prevent possible fire or personal injury:
z Please read the informatisafety on carefully before using the
product.
z Use the product only for the purpose specified.
z Do not disassemble the without permissionproduct .
z Please stop using the product if it is faulty or abnormally hot.
z Please contact the manufacturer to maintain the product.
z Do not put the product near heat sources and flame or store it in
high temperature environments.
1

Especificaciones del producto

Marca: Uni-T
Categoría: Equipo de medición
Modelo: UT568A

¿Necesitas ayuda?

Si necesitas ayuda con Uni-T UT568A haz una pregunta a continuación y otros usuarios te responderán




Equipo de medición Uni-T Manuales

Uni-T

Uni-T UT575B Manual de Usario

14 Septiembre 2024
Uni-T

Uni-T UT503PV Manual de Usario

14 Septiembre 2024
Uni-T

Uni-T UT225B Manual de Usario

13 Septiembre 2024
Uni-T

Uni-T UT377C Manual de Usario

13 Septiembre 2024
Uni-T

Uni-T UT387S Manual de Usario

13 Septiembre 2024
Uni-T

Uni-T UT243 Manual de Usario

13 Septiembre 2024
Uni-T

Uni-T A13T Manual de Usario

13 Septiembre 2024
Uni-T

Uni-T UT283A Manual de Usario

13 Septiembre 2024
Uni-T

Uni-T UT262E Manual de Usario

13 Septiembre 2024
Uni-T

Uni-T UT267B Manual de Usario

13 Septiembre 2024

Equipo de medición Manuales

Últimos Equipo de medición Manuales