Valcom V-5324004 Manual de Usario

Valcom sistema de intercomunicación V-5324004

Lee a continuación 📖 el manual en español para Valcom V-5324004 (4 páginas) en la categoría sistema de intercomunicación. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Issue 3

1947174

PagePac®

STATION DOOR PHONE

V-5324004

INTRODUCTION

The Station Door Phone is specifically

designed to communicate with a telephone

system that provides Primeline, Off-hook

ring-down, Hotline and Elevator Call

capabilities.

The Station Door Phone connects to a

standard telephone system analog station port

to allow the caller at the door speaker to have

a two-way conversation with someone inside

the building. The weather resistant enclosure

is ideal for indoor or outdoor environments.

SPECIFICATIONS

FEATURES

• Push Button - to initiate signaling

• LED - lights up to indicate activation

• Two-way handsfree voice communication

• Volume Control - adjusts speaker volume

• No external power required

• Stainless steel faceplate with tamper

resistant hardware

• Weather resistant gang box included

• VOX circuit - to turn unit off with lack of

voice activity

• Turns off if button is depressed a second

time

• Alert tone emits from speaker when

accessed

Dimensions/Weight

Unfinished (without the gang box)

• 4.63” W x 4.63” H x 1.75” D

(11.76cm x 11.76cm x 4.45cm

0.72 lbs. (0.32 kg)

Finished (with the gang box)

• 4.75” W x 4.75” H x 2.50” D

(12.07cm x 12.07cm x 6.35cm)

1.52 lbs. (0.68 kg)

OPERATION

Off-Hook Ring-down, Hotline, Primeline

The Station Door Phone operates much like a

telephone without a dial-pad. It connects to an

analog station port on a telephone system.

When the Station Door Phone push button is

pressed, this unit provides an off-hook

condition to the telephone system analog

station port, the faceplate LED lights and an

alert tone beeps at the speaker.

Some telephone systems provide a

programmable auto-dial/ring-down feature.

When used with these telephone systems, the

phone system will automatically dial a

telephone number (preprogrammed into the

phone system software) when the Station

Door Phone push button is pressed. The

person answering the ringing phone inside is

automatically connected to the caller at the

Station Door Phone.

To call the Station Door Phone from a

telephone, dial the extension number, just as

you would dial a telephone extension.

NOTE: See Figure 5 for normal default Dip

Switch settings.

Auxiliary Alert

The Station Door Phone can be used to

activate an Auxiliary Alert device (such as a

door bell or chime) instead of ringing a

telephone.

VOX Operation

The Station Door Phone is equipped with a

VOX (voice activated switch) circuit. This

feature is provided to automatically drop

communications to the door speaker when

there is no audio detected, for more than 24

seconds, from the telephone extension within

the building. Visitors talking into the door

speaker will not affect the VOX circuit.

INSTALLATION

There are two surface mount methods to

secure the Station Door Phone to a wall. The

first method utilizes mounting brackets. The

gang box mounting brackets (included) can be

screwed to the back plate so they protrude out

the sides of the box. Position the screws

through the bracket holes and secure the box

to the wall.

Another method to attach the gang box to the

surface of a wall is to drill mounting holes (4)

directly into the back of the box. Position the

screws through the inside of the box and

secure to the wall.

NOTE: All conduit and closure plug

connections should be adequately sealed

(i.e., pipe joint compound) for wet location

installations.

Do not allow conduit to protrude into rear

opening of outlet box to avoid interference with

Station Door Phone. Wire length should be

kept to 6 inches to avoid interferences during

installation. For maximum protection from

ESD or lightning, connect the outlet box to

earth ground via the conduit.

CONNECTIONS

The Station Door Phone back panel has two

sets of terminals; one set is labeled “ALERT”,

and the other labeled “TIP/RING” (see Figure

1). The “TIP/RING” terminals that connect to

your telephone system must use twisted pair

phone wire. See Figure 2 for wiring diagram.

Follow steps below:

NOTE: Check National Electrical Code and

applicable local codes and ordinances for

exact wiring requirements for your area.

1. Loosen each of the terminal block screws

and insert exposed wire ends into

appropriate terminal block locations.

Tighten screws and ensure wire

connections are correct before continuing.

2. Place the dip switch in the position shown

in Figure 5 (factory default setting).

Program your telephone system for the

phone number(s) to be called when the

Station Door Phone button is activated.

Dip Switch Features

(Power must be cycled after dip switch

settings change).

Guard Mode - Alerts the guard with the

second DPDT (Double Pole, Double Throw)

contacts and disables off-hook control.

Elevator Mode - Depressing button activates

the unit and can not be turned off (on-hook)

and disables VOX timeout.

Push On-Push Off Mode - Depress button to

activate, press again to cancel. 24 second

VOX timeout. Factory default position.

Line Flash Ring Mode - Depress button to

activate. Press again to flash (800mS) to

signify “telephone” host system to re-ring.

Push On Only Mode - Depressing button

activates unit and can not be turned off, unit

returns on-hook status after 24 second timeout

period.

Momentary Page Mode - Push to activate.

NOTE: Total length of wire from the door

phone unit to the telephone system is not to

exceed 1500 feet.

3. Connect the Station Door Phone wires to

the designated station port on the

telephone system.

4. Test the system by having an assistant call

the designated extension number of the

Station Door Phone.

Guard Elevator

Push On Push Off Line Flash Ring

Push On Only Momentary Page

1 2 3 4

ALERT Tip Ring

Off

Adjust the speaker volume (see Figure 3)

to an appropriate level.

5. Place poly-fil pad in designated position for

good sound quality (see Figure 3).

6. Secure Station Door Phone and faceplate

to double-gang outlet box with four

mounting screws (included).

INSTALLATION INSTRUCTIONS

CUSTOMER PROVIDED OR EXISTING

DOOR ALERT (SIGNALING UNIT)

These instructions apply to the use of a

customer provided auxiliary alert or an existing

door alert (signaling) unit.

1. Connect Station Door Phone to existing

door alert push button so that existing

button is in parallel with Station Door

Phone Terminals 1 and 2 (see Figure 2).

NOTE: While Station Door Phone button or

existing door bell button is depressed some types

of alerting devices will continue to sound or

operate.

If desired, the existing door bell button can be

removed thus allowing the Station Door Phone

button to replace the function of the existing

door bell button. Connect wires from existing

door bell button to Terminals 1 and 2 on the

Station Door Phone (see Figure 4).

NOTE: When using Auxiliary Alert option, all

four wires must be connected.

TECHNICAL ASSISTANCE

When calling, have a VOM and a telephone

test set available and call from the job site.

Call (540) 563-2000 and press 1 for PagePac

Technical Support or visit our websites at

http://www.pagepac.com and

www.valcom.com.

Should repairs be necessary, attach a tag to

the unit clearly stating company name,

address, phone number, contact person and

the nature of the problem. Send the unit to:

Valcom, Inc.

PagePac® Repair Dept.

5614 Hollins Road

Roanoke, VA 24019-5056

FIGURE 1. STATION DOOR PHONE TERMINAL

LOCK/DIP SWITCHES

FIGURE 2. STATION DOOR PHONE WIRING DIAGRAM

PHONE SYSTEM

T & R

STATION PORT

TWISTED PAIR

PHONE WIRE

DOOR

BUTTON

DOOR

SPEAKER

STATION

DOOR PHONE

Especificaciones del producto

Marca:	Valcom
Categoría:	sistema de intercomunicación
Modelo:	V-5324004

¿Necesitas ayuda?

Si necesitas ayuda con Valcom V-5324004 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

sistema de intercomunicación Valcom Manuales

Valcom V-1072B Manual de Usario

19 Septiembre 2024

Valcom V-1074 Manual de Usario

19 Septiembre 2024

Valcom V-2972 Manual de Usario

19 Septiembre 2024

Valcom V-9953 Manual de Usario

19 Septiembre 2024

Valcom V-TR96 Manual de Usario

19 Septiembre 2024

Valcom V-5324004 Manual de Usario

19 Septiembre 2024

Valcom V-9908 Manual de Usario

19 Septiembre 2024

Valcom V-9923B Manual de Usario

19 Septiembre 2024

Valcom V-1096 Manual de Usario

19 Septiembre 2024

Valcom MultiPath Talkback Manual de Usario

19 Septiembre 2024

sistema de intercomunicación Manuales

Últimos sistema de intercomunicación Manuales

Extel Levo JS-V742N2 Manual de Usario

27 Octubre 2024

Dahua Technology DHI-VTH5221DW-S Manual de Usario

26 Octubre 2024

Hikvision DS-KIS703-P Manual de Usario

8 Octubre 2024

Viking K-1900-712L-EWP Manual de Usario

1 Octubre 2024

Viking K-1700-3 Manual de Usario

1 Octubre 2024

Viking E-50-SS Manual de Usario

1 Octubre 2024

Viking E-50-WH Manual de Usario

1 Octubre 2024

Viking K-1700-IP-EWP Manual de Usario

1 Octubre 2024

Viking E-60-BN Manual de Usario

1 Octubre 2024

Viking E-1600-53-IP Manual de Usario

1 Octubre 2024