Vermona Modular qMI2 Manual de Usario

Vermona Modular No categorizado qMI2

Lee a continuación 📖 el manual en español para Vermona Modular qMI2 (22 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/22

Introduction

Patch ayour VCO, VCF VCA,and add few envelopes and LFOs and your

modular synthesizer system to MIDI/CV-is ready go. Now, connect your

interface start great, thereand playing. This is however, may be some or

even left inlots of unused modules your frame, fornot usedbeing this

patch. You may have useful applications for these but how to address them?

Analogue modular mainly used monophonically.systems are Therefore,

almost all areMIDI/CV-modules limited to output. themonophonic On

other the the system, the possibilities tohand, bigger modular more

address modules are needed.

We have developed the qMI quad- MIDI interface for exactly this scenario.

Whether patches, a rotatingyou need four independent layering of sounds,

voice assignment or even a - thepolyphonic sound qMI quad- MIDI inter-

face will help you, getting the most out of your modular system.

The VERMONA-team

Erlbach/Vogtland, Germany

Important Safety Information

1. Read these instructions.

2. Keep these instructions. Alway include these instructions when passing

the product on to third parties.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Only clean the product when it is not connected to the mains power

supply. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

Owner's Manual - VERMONA*modular qMI - quad MIDI Interface

- 2 -

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualiﬁed service personnel.Servicing is required

when the apparatus has been damaged in any way, such as power sup-

ply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, when the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

15. To completely disconnect this apparatus from the AC mains,

disconnect the power supply cord plug from the AC receptacle.

16. WARNING: To reduce the risk of ﬁre or electric shock, do not expose

this apparatus to rain or moisture.

17. Do not expose this equipment to dripping or splashing and ensure that

no objects ﬁlled with liquids, such as vases, are placed on the equip-

ment.

18. The mains plug of the power supply cord shall remain readily accessi-

ble.

Installation

• Ensure that the room in which you use this product is wired in accordance

with the local electrical code and checked by a qualiﬁed inspector.

• Only use this product indoors.

• Do not install the product in hot, humid, or excessively dusty locations, in

direct sunlight or in locations where it is exposed to externally generated

vibrations.

• Do not place burning objects (e.g. candles) on top of or near the product.

• If condensation has formed on the product, e.g. because it was moved

from a cold environment to a warm one, allow the product to acclimatize

to room temperature before using it.

• Do not overload wall outlets and extension cables as this may result in

ﬁre and electric shock.

Owner's Manual - VERMONA*modular qMI - quad MIDI Interface

- 3 -

Especificaciones del producto

Marca:	Vermona Modular
Categoría:	No categorizado
Modelo:	qMI2
Color del producto:	Wit
Peso.:	385 g
Ancho:	122 mm
Profundidad:	44.5 mm
Altura:	220 mm
Peso del embalaje:	475 g
Ancho del embalaje:	128 mm
Empaquetadura en profundidad:	52 mm
Altura del embalaje:	252 mm
Número de lámparas:	2 lampen
tipo-de-lámpara:	UV-C
Activos:	3 W
Tipo de conector USB:	USB Type-C
Tipo de fuente de energía:	DC
País de origen:	China
Carga inalambrica:	Ja
Potencia de la lámpara:	0.5 W
Ancho interior:	100 mm
altura interior:	196 mm
Profundidad interior:	13 mm
Radiación ultravioleta (UV):	275 nm